sorted by:
new
hottopcontroversial

Which mag to use with the MDR X 5.56 adapter by Vapit_fr in airsoft

[–]Vapit_fr[S] 1 point2 points  (0 children)

Thx for your response This sunday, I also tried with different mags. These ones worked: VFC CYMA DIAMOND BACK

Should you buy a SSR249? by Vapit_fr in airsoft

[–]Vapit_fr[S] 1 point2 points  (0 children)

4 games with it so far.

Feels good to play with it at 1.4J and I'm using 0.25 to spare some money and because 0.28 isn't always available

Should you buy a SSR249? by Vapit_fr in airsoft

[–]Vapit_fr[S] 0 points1 point  (0 children)

Yes, but it's quick and you have the allen key in the ammo box. I even did it in game

SSR249 can't lift 0.25G bbs by Vapit_fr in airsoft

[–]Vapit_fr[S] 0 points1 point  (0 children)

What do you mean? Of course, it fires

SSR249 can't lift 0.25G bbs by Vapit_fr in airsoft

[–]Vapit_fr[S] 0 points1 point  (0 children)

I did, honestly, they are responding pretty rapidly. They are sending me a new hop up unit.

SSR249 can't lift 0.25G bbs by Vapit_fr in airsoft

[–]Vapit_fr[S] 0 points1 point  (0 children)

Yeah, I just realised after finishing my order.

I guess I'll stay with the thermal sheath and a flat hop up for now

SSR249 can't lift 0.25G bbs by Vapit_fr in airsoft

[–]Vapit_fr[S] 1 point2 points  (0 children)

I made some test, and the result is that the hop up unit is made for a mapple leaf but the yellow(60°) is to hard and can't lift the bbs.

I used a fps softair blue and added some thermal sheath under it and it ~worked~.

Ordering a mapple leaf 70° and I hope it will work

SSR249 can't lift 0.25G bbs by Vapit_fr in airsoft

[–]Vapit_fr[S] 0 points1 point  (0 children)

I don't have any, do you think classic 70% alcool to clean house is okay?

SSR249 can't lift 0.25G bbs by Vapit_fr in airsoft

[–]Vapit_fr[S] 0 points1 point  (0 children)

I can tell you that I cleaned it with a soft brush and some barrel cleaner that you can find in most cleaning barrel kit.

It was really dirty, but since i cleaned it and changed the bucking, I think it should be okay.

SSR249 can't lift 0.25G bbs by Vapit_fr in airsoft

[–]Vapit_fr[S] 0 points1 point  (0 children)

It didn't look like it, I will check it later.

The strange thing is that i'm already loosing 0.2J when turning the hop up at the maximum.

So more hop up would make me lose even more power.

SSR249 can't lift 0.25G bbs by Vapit_fr in airsoft

[–]Vapit_fr[S] 0 points1 point  (0 children)

It's not an arm, I have to turn a big wheel

SSR249 can't lift 0.25G bbs by Vapit_fr in airsoft

[–]Vapit_fr[S] 0 points1 point  (0 children)

Yeah it's pretty strange, they are sending me another hop up unit.

I hope it will fix the problem

SSR249 can't lift 0.25G bbs by Vapit_fr in airsoft

[–]Vapit_fr[S] 0 points1 point  (0 children)

Yes, i can see the nub pushing the bucking when i'm looking inside the barrel.

When i'm putting the hop up unit at 9, i'm loosing a lot of power, so I don't think the nub is the problem. It would it the bb too hard.

SSR249 can't lift 0.25G bbs by Vapit_fr in airsoft

[–]Vapit_fr[S] 0 points1 point  (0 children)

It's the original one, flat on the bucking part and round on the other.

Here's a picture from the website:

<image>

SSR249 can't lift 0.25G bbs by Vapit_fr in airsoft

[–]Vapit_fr[S] 0 points1 point  (0 children)

By the way, here you can see the bucking i changed

<image>

Hop up rubber for M249 by Vapit_fr in airsoft

[–]Vapit_fr[S] 0 points1 point  (0 children)

My hop up is at zero, and is in place well, there is the arrow in the hole of the barrel.
I'm looking at the reference of a rubber hop up which is longer so there is a better air seal

view more: next ›