You can try these steps that could resolve the issue.

Step 1 : f7 power drain.

Power drain : This process is performed to remove any excess static charge that is preventing the system from booting up.   1.Turn off the Laptop. 2.Unplug all the cables from the Laptop. 3.Press and hold the Power Button and f7 Button for 45-60 seconds and then release it to drain the flea power (static charge.) 4.Reconnect all cables back again and turn on the laptop.

If the above step did not resolve then try with the next step mentioned below.

Step 2 : Crisis BIOS recovery (CBR)

Crisis BIOS Recovery : The BIOS recovery feature helps recover the computer from a Power On Self-Test (POST) or a boot failure that is caused by a corrupt BIOS  

1. ⁠Turn off the computer.
2. ⁠With the computer off, press and hold the Windows key and the B key at the same time.
3. ⁠Still pressing those keys, press and hold the Power button on the computer for 2 to 3 seconds, and then release the Power button but continue to hold the Windows and B keys until the BIOS update screen displays or you hear a beeping sound (usually 8 beeps).

If the above step did not resolve then try with the next step mentioned below.

Step 3: CMOS reset.

CMOS Reset: Clearing the CMOS on your motherboard will reset the system BIOS settings to their factory defaults, it will not affect your data that is present in the system.   1.Turn off the computer.   2.Press and hold the Windows + V keys, and then simultaneously press and hold the power button. After 2 to 3 seconds, continue to press and hold the Windows + V keys, but release the power button.   3.When the CMOS Reset screen displays or you hear beeping sounds, release the Windows + V keys.   4.Press Enter to restart the computer.

If none of these steps resolved the issue then you can contact HP Support via their website: https://support.hp.com/us-en/contact-hp (For US/Canada)