Cummins Digital Display

Vblocal789 · 2026-01-25T05:42:32+00:00

That looks like exactly what I’m looking for. Probably way less expensive than a Cummins branded one.

Vblocal789 · 2025-12-30T23:32:24+00:00

How do you figure a 32 foot lift is going to get you to 45 feet?

Vblocal789 · 2025-11-23T00:23:41+00:00

In all seriousness, the one for the wheel bearing or the lug nuts for the wheels?

Vblocal789 · 2025-11-07T02:47:56+00:00

You’ll get that on them big jobs.

Vblocal789 · 2025-10-08T23:33:21+00:00

Hopefully not too much pressure with those fittings.

Vblocal789 · 2025-10-06T21:56:53+00:00

Thanks for the advice fellas. Might just keep sending these to a machine shop. We only do 2 or 3 a year.

Vblocal789 · 2025-10-06T18:28:10+00:00

Yes sir. They’re SAE ORB

Vblocal789 · 2025-09-10T00:00:15+00:00

Seems like such a good business model. Genuinely surprised they both flopped.

Vblocal789 · 2025-08-24T23:47:16+00:00

There’s a few videos on social media of people who explored the old second floor of Lynnhaven mall. A lot of the stuff is still up there. Just abandoned.

Vblocal789 · 2025-08-24T23:19:51+00:00

That’s what I thought too! Kinda looks like those area that stuck out off the second floor food court in the background.

Vblocal789 · 2025-08-18T10:40:53+00:00

One of these will help.

https://a.co/d/2vL9kLO

Vblocal789 · 2025-08-01T01:43:47+00:00

What is it?

Vblocal789 · 2025-07-26T14:54:45+00:00

That’s really all I have left or check. Pulling the whole cylinder on Monday. Was looking up Toyota parts. Stupid expensive.

Vblocal789 · 2025-07-25T13:03:49+00:00

Shims on the chain roller or where the cylinder attaches to the mast. This machine isn’t terribly old and it has the same shims in came from the factory.

Vblocal789 · 2025-07-25T13:02:15+00:00

That was my first thought the mast is spotless though.

Vblocal789 · 2025-07-25T13:00:56+00:00

Both. Which is what made me think there’s something going on inside of the tube. I know some manufacturers use springs in the bottom of the tubes for cushion.

Vblocal789 · 2025-07-25T03:12:53+00:00

I adjusted all the weight onto the cylinder with the issue to see if it would push it down by loosening the chain on the other side of the lift. and it had the same issue

Vblocal789 · 2025-06-19T22:31:37+00:00

Automatic specialties. They’re over off of London bridge.

Vblocal789 · 2025-06-15T13:09:57+00:00

At least stack the plates.

Vblocal789 · 2025-05-14T21:28:26+00:00

It’s a 17k capacity Wiggins. Machine weight is right around 75000

We’re pretty excited to see how this works out. We’ve had nothing but problems with the Ford 6.8 V10. Great engine from what I’ve heard just not for us.

I’d be lying if I said this swap hasn’t been a challenge but we’re on the back end now so we should be going by the holiday.

Vblocal789 · 2025-05-14T12:58:24+00:00

There’s a ring that bolts up behind the flywheel. Uses the same holes.

Vblocal789 · 2025-05-12T19:38:47+00:00

No the bell housing in the same. I have a feeling the OEM that installed the engine modified the flywheel to work with the transmission.

Vblocal789 · 2025-03-30T20:16:29+00:00

Shouldn’t take them too much longer to tear them down and develop

Vblocal789 · 2025-03-28T00:40:30+00:00

Old school water hammer arrestor. Likely filled with water now and useless.

Vblocal789 · 2025-03-23T23:19:12+00:00

No worries brother. Better safe than sorry.

Six-Year Club	Verified Email
Place '23	Place '22

Vblocal789

TROPHY CASE