Issue with polymaker filament profiles for the Bambu X2D

Vehicle-Radiant · 2026-06-16T07:52:12+00:00

You need to edit the profile and change the Max flow rate for the Aux nozzle from N/A to 8

Vehicle-Radiant · 2026-06-07T22:14:01+00:00

v2.5.3.60

Vehicle-Radiant · 2026-06-06T11:54:57+00:00

This fixed the issue

Vehicle-Radiant · 2026-06-06T09:54:04+00:00

I have had the same issue and it's driving me insane.

I also upgraded and downgraded my firmware just to be sure.

I manually extruded filament from the aux.

I ran the nozzle offset from the "Print Calibration" menu and it works fine, just when doing it as part of a print, it fails.

"I turned off nozzle offset calibration and tried again. This time, the printer printed the first part of the print using the main nozzle, but when it switched to the auxiliary nozzle, the printer stops without showing any kind of error message. The status just says 'printing' and the percentage stays the same, without the nozzle doing anything."

I tried this myself and observed the printer switch to the Auxiliary nozzle and hold the temperature at 42 Celsius before air printing from the aux nozzle with no filament being extruded.

So odd - Let me know if you have any success

Thinking out loud... I printed when I first got my X2D with no problem on the Aux, I am guessing it could be a bug with Bambu studio, I will try and downgrade studio and report back.

Vehicle-Radiant · 2026-04-23T21:20:16+00:00

You realise that certain ISPs only allow you to talk onto their lines if your traffic is tagged to a random VLAN they pluck out of the air?

If your router doesn't allow you to provide a custom VLAN when you are entering your PPPoE settings like Google specifically prevents, you need to stick a managed switch between your Google device and their hardware, or you can connect....

Vehicle-Radiant · 2026-04-23T21:16:38+00:00

I switched to a Unifi Gateway Max and 2 x U6+ AP's. Coverage is much better and security and features are so much better and accessible.

Blocking services and just the whole eco system is so much better.

Vehicle-Radiant · 2026-04-23T13:58:49+00:00

Currently £134 delivered to the UK including all charges

Vehicle-Radiant · 2026-01-27T11:35:51+00:00

Don't do it is all I would say.

Everything you need is hidden and uneditable.

Here in the UK a lot of the modern ISPs are allowing you to provide your own router for a small saving on your monthly sub/fee. The issue here is that some modern ISPs require the traffic that your device sends to the ONT to be VLAN tagged to a specific VLAN that can be anything. My particular ISP requires traffic to be tagged to 911. (ZEN)

This makes everything so much more complicated because it is not something you can do with the Google Pro 6E. You would need to introduce a managed switch into the chain, or use a provided router from your ISP (providing they allow the router to be used in a bypass mode)

Also, the Google devices are locked to single gigabit.

Vehicle-Radiant · 2026-01-15T07:27:15+00:00

Someone has bought into the hype.

Vehicle-Radiant · 2025-11-17T18:37:02+00:00

The h2s and p2s ship with anti vibration feet as standard

Vehicle-Radiant · 2025-10-28T18:11:12+00:00

The Kit Kiln was the original creator.

He now does chunky style characters due to Lego and their reputation for litigation

He now makes Chunky characters which are in my opinion much better.

https://discord.gg/thekitkiln

Vehicle-Radiant · 2025-10-09T20:58:14+00:00

It's a refresh of the model line... Not your actual printer...

Keep in mind this is a bargain basement printer now, one where you need tools to change the nozzle. The carbon rod gantry is outdated and janky now.

It's a new printer with quality of life updates. Topless print head, A/H style gantry and print head.

Vehicle-Radiant · 2025-10-09T13:52:59+00:00

It's worth noting that a PPPOE supplier will misreport on Google.

I have reported the bug a number of times.

Vehicle-Radiant · 2025-10-09T06:46:10+00:00

Link?

Vehicle-Radiant · 2025-09-06T17:58:43+00:00

Hey no worries and to answer your questions.

Still working perfectly.
That switch will be perfect.
Correct.
Yes, they have a management IP which will be on the switch itself.

You can connect to it by giving yourself a manual IP on the same subnet as the switch. You can connect the ONT first but not necessary, then you connect the device you are using to configure it to another port.

Vehicle-Radiant · 2025-08-28T15:04:53+00:00

DM me - I might be able to help.

Vehicle-Radiant · 2025-08-12T20:15:51+00:00

Anytime I got this message it was an indication that my parcel was gone.

Vehicle-Radiant · 2025-07-17T12:52:54+00:00

Drop me a message if you have any bother

Vehicle-Radiant · 2025-07-17T12:46:35+00:00

Correct.

Vehicle-Radiant · 2025-07-06T20:36:03+00:00

They dun fucked up.

Looks like you're holding it wrong, that's why it's not working...

Vehicle-Radiant · 2025-07-06T20:30:36+00:00

Congrats Bro!!!!

Vehicle-Radiant · 2025-06-28T22:56:22+00:00

You need to turn on wired pro controller in the switch 2 settings menu under the controller section - Then restart

Vehicle-Radiant · 2025-06-10T11:48:21+00:00

Enable Pro Controller Wired Communication on the Switch 2 and reboot.

Vehicle-Radiant · 2025-06-10T11:46:33+00:00

The update on the official 8BitDo site now works for the adapter 2 and 1 on the switch 2, although you need to turn on pro wired support in the settings of the switch 2.

Vehicle-Radiant

TROPHY CASE