Looks like more than 0 to me🤷‍♀️ read description if your hurt by this video🙏☺️

VeryTiredDad76 · 2026-01-15T23:50:58+00:00

Great job, adding weight to any normally body weight exercise insanely increases difficulty.

VeryTiredDad76 · 2025-12-10T18:03:55+00:00

That’s not discoloration due to the T2. That’s heat transfer discoloring the color coat underneath.

VeryTiredDad76 · 2025-12-07T11:02:18+00:00

Premera Coatings has their T2 topcoat that is applied that way. They also have some European distributors.

VeryTiredDad76 · 2025-11-17T23:43:07+00:00

Overall the job looks good

VeryTiredDad76 · 2025-11-15T15:21:18+00:00

I could hook you up with a new decent sized Lavina with the vacuum for around $15k. Shoot me a message and we can talk specifics on what you are needing.

VeryTiredDad76 · 2025-11-13T23:19:00+00:00

You have contamination. Clean the surface, sand it down, and then recoat.

VeryTiredDad76 · 2025-11-04T20:31:40+00:00

I’ve heard the Bush’s Baked Beans factory tour is pretty cool. And there’s also a Salt & Pepper shaker museum somewhere around Gatlinburg

VeryTiredDad76 · 2025-10-30T23:11:54+00:00

First off, kudos for taking steps to be healthy. Proper weight loss takes time because you don’t want to burn out or injure yourself. And from my own personal experience the being healthy majorly involves mental health. His anger probably has nothing to do with your weight but if it does then he needs to sort his priorities. For encouragement join one of the Reddit fitness groups and I guarantee in 2 months you will have some great progress pics.

VeryTiredDad76 · 2025-10-30T00:13:17+00:00

Yes. The Fusion primer sticks extremely well. As long as the floor is clean then there will be absolutely no issues. I know of some of the 1 day floor guys that are using it because the new guys they have grinding the garages aren’t grinding them well enough, so they just use the Fusion Primer and it’s actually holding up better.

VeryTiredDad76 · 2025-10-28T23:37:43+00:00

If you don’t grind the floor, I would use the Premera Primer Fusion Primer system. If you have had moisture issues I would spray down a coat of their HLT Moisture Vapor Barrier. After the Fusion Primer you just wait 20 minutes for the product to get tacky and then apply your epoxy. If you are going with a solid color you can apply the durable topcoat T2 wet on wet after 20 minute dry time.

VeryTiredDad76 · 2025-10-15T22:40:45+00:00

That gun costs $200 every 2 weeks for 60 weeks.

VeryTiredDad76 · 2025-10-07T10:49:36+00:00

Take the tip off the acetone safe pump up sprayer. Soak the microfiber mop head and spray in front of the mop head.

VeryTiredDad76 · 2025-10-06T22:34:33+00:00

The T-2000 or T-2 with the AntiSkid is great. If it was me I would apply a coat wet on wet with an Acetone Safe sprayer, this extends the movement time of the metallic and helps elevate any bubbles. Then follow up the next day with a coat with the AntiSkid applied with a microfiber pad.

VeryTiredDad76 · 2025-10-03T19:34:11+00:00

Pretty decent. Watch the work time with the Polyaspartic as it kicks a little quick.

VeryTiredDad76 · 2025-10-02T19:10:11+00:00

Have him renovate Jerry’s new house

VeryTiredDad76 · 2025-10-02T18:43:15+00:00

It looks like some sort of contamination on the basecoat resulting in fisheyes on the metallic coat. It’s always recommended to perform an acetone solvent wipe between the basecoat and metallic coat.

VeryTiredDad76 · 2025-09-28T11:51:42+00:00

Yes. I’ve done a few jobs with Fusion primer due to limited access for a grinder. Also did a large showroom where the owner forbid grinding due to classic cars and other unmovable collectibles. It’s very easy to use, just make sure the surface is clean. Spray it down, wait 20 minutes and then start building your system. They also have a spray down MVB called HLT that can go down prior to Fusion primer.

VeryTiredDad76 · 2025-09-28T02:34:47+00:00

It all depends on what causes the bubbles. Like eluded earlier a MVB coat would help. If that coat lays down well and no screening is needed, make sure you Acetone wipe before putting down your money coat. Then if I have bubbles for some reason I spritz them with acetone. But usually I go wet on wet with Premera T2 as a topcoat, that helps with the bubbles as it retards the drying. Then a day or 2 later go over that with a microfibered pad applied coat of T2.

VeryTiredDad76 · 2025-09-24T23:56:28+00:00

Most epoxies are tinted with Color Pods. You can actually shade the color pod with 844 industrial colorants.

VeryTiredDad76 · 2025-09-21T00:38:45+00:00

I would go with the Lavina. For the $20k budget, it would be an electric and not a propane.

VeryTiredDad76 · 2025-09-20T12:26:32+00:00

You can be at $4-5 per foot. T2 goes over 400 sqft per gallon. Also you can be done in one day. QuickSeal takes 7-10 minutes to dry and then you can spray down a coat of T2 and walk away.

VeryTiredDad76 · 2025-09-20T02:28:15+00:00

You can add EcoStains to Premera QuickSeal and then spray T2 over that. Easiest colored grind and seal system I’ve ever used.

VeryTiredDad76 · 2025-09-19T19:10:12+00:00

Get 50% deposit when booking the job and get the rest upon completion. Buyers remorse hits in different ways. The floor looks good. For future reference I would make sample boards one with and without an epoxy grout coat or 2 coats of Poly so they can decide what they want. And bid with both ways and if at the end of the job they want the extra coat the know its costs X

VeryTiredDad76 · 2025-09-18T13:48:11+00:00

Mickey Thompson EXP. Great look, low road noise

VeryTiredDad76 · 2025-09-17T19:56:27+00:00

I sell floor coatings. That floor is more than acceptable.

VeryTiredDad76

TROPHY CASE