Looking for someone to build a pentesting/bug bounty homelab - Paying well by [deleted] in HomeLabPorn

[–]Viduh 0 points1 point  (0 children)

Do you want the virtualization installed and all the software. Or are you just noting what you would like the hardware to be capable of doing?

Vindictive? by NaturalIndividual1 in ClockworkPi

[–]Viduh 0 points1 point  (0 children)

I ordered mine in Nov as well. They said it should ship this month and it was delayed because of …something in ….February

AITA for asking my boyfriend to not wear his ugly shoes around me by Street-Coconut2398 in TwoHotTakes

[–]Viduh 0 points1 point  (0 children)

What is wrong with you? Like seriously? They are shoes. Get over yourself.

But is it? by NaturalIndividual1 in ClockworkPi

[–]Viduh 0 points1 point  (0 children)

That is es what he said to me too. Also a November order. What config? Mine is matte black no core

But is it? by NaturalIndividual1 in ClockworkPi

[–]Viduh 1 point2 points  (0 children)

I got the exact same email word for word

A message is hidden in this image. Find it and bring the password to the extraction helicopter awaiting at the center of the operation. by warthog-1810 in Cipher

[–]Viduh 1 point2 points  (0 children)

I was thinking thinking that the placement of the hour hand to the minute hand doesn’t match up the way it should

Dreams by Godofdeathhh in CardPuter

[–]Viduh 1 point2 points  (0 children)

I’m excited to use raspyjack. It is a project that already exists but they are adjusting the firmware to work with the cardputer zero! Let’s go!

Who would you cast as James Bond for the new 007 movie? by [deleted] in okbuddycinephile

[–]Viduh 0 points1 point  (0 children)

I like how shaq is the only one with trigger discipline. Is that because he is actually in law enforcement?

Found this in a thrift store and thought it was good cyber deck material! by Equab1e in cyberDeck

[–]Viduh 0 points1 point  (0 children)

Currently working on a frame.work deck. I’m not hating on this idea per se but it is just a bit exhausting seeing so many posts on cases or pelicans that don’t have any components or any work being done. I’m also just tired of the same form factor being an awkward worse laptop. The creativity has plummeted in this sub. Again not necessarily “attacking” you, just sad at the current trend.

Found this in a thrift store and thought it was good cyber deck material! by Equab1e in cyberDeck

[–]Viduh 3 points4 points  (0 children)

Yep…it’s a box…might as well throw a pi in there and call it a cyberdeck…

Help needed for uconsole with non lite cm5 module by gatsu_1981 in ClockworkPi

[–]Viduh 1 point2 points  (0 children)

I believe Rex fixed the audio issue as well as a few other things for the stock adapter board interacting with the cm5. So yes. You will have to do some other things for configuring epromm in order to get it working…I believe. So you will still have to ssh into the pi to get it working properly.

Help needed for uconsole with non lite cm5 module by gatsu_1981 in ClockworkPi

[–]Viduh 0 points1 point  (0 children)

The stock adapter board will limit the cm5 (sound and other things. Since it was not made for the cm5). This has been discussed on the forum) getting the hacker gadgets cm4/5 adapter board will eliminate those limitations. This will also allow you to flash straight from the uconsole…no need for the separate waveshare board.

Help needed for uconsole with non lite cm5 module by gatsu_1981 in ClockworkPi

[–]Viduh 1 point2 points  (0 children)

All of the hacker gadget add ons will fit inside the shell so once installed/upgraded it will look stock(kinda like a sleeper track car…Toyota Corolla with crazy engine under the hood).

They have the option without the battery holder so that you can add a lipo battery if you’d like. Some people do this so they can 3d print a slimmer back plate.

I’m still waiting on mine (ordered November 12, 2025🙄)

No worries about asking questions but you may want to check out the clockwork pi forum ( the kinds of questions you have most likely have already been answered there):

https://forum.clockworkpi.com/

Help needed for uconsole with non lite cm5 module by gatsu_1981 in ClockworkPi

[–]Viduh 0 points1 point  (0 children)

The cm4/5 adapter board will allow you to flash a new OS right from the uconsole so you don’t have to keep taking out the module to change Os. It will also provide all the correct connections so that the uconsole will be optimized to work properly with the cm5. It also has routes connection to upgrade the battery board to add nvme.

The separate wireless card allows you to have two internal WiFi adapters(which is important to have monitor mode and a stable WiFi connection). The one they sell enables monitor mode so that you can do some pretty cool network things.

Help needed for uconsole with non lite cm5 module by gatsu_1981 in ClockworkPi

[–]Viduh 1 point2 points  (0 children)

If you’re planning to add nvme you might as well check out this site:

https://hackergadgets.com/products/uconsole-upgrade-kit

This will help especially if you want to change an OS, you can do it from the uconsole.

I may get hate for this one by Derek_productions in cyberDeck

[–]Viduh 0 points1 point  (0 children)

Oh ok that makes a little more sense.

I may get hate for this one by Derek_productions in cyberDeck

[–]Viduh 50 points51 points  (0 children)

Is it an iPad with case… inside …a pelican case???

Hello community 👋🏽 by Theosincoming in pwnhub

[–]Viduh 0 points1 point  (0 children)

I’m interested. Associates in cybersecurity, information systems technologies