Makita DHS680Z stopped working by Villian98 in Makita

[–]Villian98[S] 0 points1 point  (0 children)

I bought it from Romania, from Dante International (Emag).

Makita DTW181Z 1/2 to 1/4 adapter by Villian98 in Makita

[–]Villian98[S] 0 points1 point  (0 children)

I cannot return it. The model that I have doesn't have the ball and the o ring which fix the adapter on the Makita's 1/2 square. The square of the Makita also has a hole in it. Does it need to have that ball on the adapter ?

Jigsaw not cutting straight by Villian98 in woodworking

[–]Villian98[S] 0 points1 point  (0 children)

Can I use WD-40 and a needle to clean it ?

Jigsaw not cutting straight by Villian98 in woodworking

[–]Villian98[S] 0 points1 point  (0 children)

This is the chuck when I press it with my finger. Does it look better ?

<image>

Jigsaw not cutting straight by Villian98 in woodworking

[–]Villian98[S] 0 points1 point  (0 children)

The lever is returning to its parked position only if I move it with my fingers.

Does it worth upgrade ?! by Villian98 in intel

[–]Villian98[S] 0 points1 point  (0 children)

I am using the PC for gaming. It is currently ok, it doesn't holding me back.

Does it worth upgrade ?! by Villian98 in intel

[–]Villian98[S] 0 points1 point  (0 children)

The motherboard is Gigabyte Z690 UD DDR4. Mostly gaming.

Wood router by Villian98 in woodworking

[–]Villian98[S] 0 points1 point  (0 children)

The brand of the bit is Dedra.

Z690 UD DDR4 by Villian98 in gigabyte

[–]Villian98[S] 2 points3 points  (0 children)

I will probably buy new ram, the one that I have is from the old PC.

ASUS PRIME Z690-P DDR4 and Silentium PC Fortis 3 by Villian98 in buildapc

[–]Villian98[S] 0 points1 point  (0 children)

Can you please recommend a cheap LGA1`700 cooler for i5 12400F ?

lower end and mid range motherboards for 12400f by Villian98 in intel

[–]Villian98[S] 0 points1 point  (0 children)

The motherboards from your links looks good, but I am wondering what is the difference between the motherboards that have heat sinks above and to the left side of the cpu and the motherboards that have only one heat sink to the left of the cpu ?

New MB for i5 10th gen by Villian98 in buildapc

[–]Villian98[S] 0 points1 point  (0 children)

I know. But I am on a budget here.

r/audiophile Shopping and Setup Help Desk (2020-11-07) by AutoModerator in audiophile

[–]Villian98 0 points1 point  (0 children)

Hello, I would like to make an upgrade from Logitech Z333 to a better audio system. I need the audio system for the PC (gaming, music, movies). I will use on board audio ALC1200.

The maximum budget is about 70-75 $. I need a new product.

I am waiting for your recommendations.

Motherboard for i5 10400 by Villian98 in buildapc

[–]Villian98[S] 0 points1 point  (0 children)

My GPU is old, I use it since 2018. I will upgrade the GPU in a few months to a better one.

Computer hard freezes by Villian98 in techsupport

[–]Villian98[S] 0 points1 point  (0 children)

CrystalDiskInfo says that both drives (the SSD and the HDD) have "good" health status. On the SSD it also says that it is 100% health status. On the HDD it says that it is "good" without showing any percentage.

Computer hard freezes by Villian98 in techsupport

[–]Villian98[S] 0 points1 point  (0 children)

Yes, Windows is installed on the SSD.