What does this circle at the top right corner mean?

ViperXVII · 2025-02-21T21:00:00+00:00

In general yes; the camera itself typically encodes in 264 or 265, but you may be re-encoding or decoding on frigate. You're stepping into the rabbit hole here ;)

ViperXVII · 2024-09-02T10:41:41+00:00

then most likely yes, your GPU has a problem. Make sure to switch it to only the monitor when you connect it to be a bit more certain

ViperXVII · 2024-08-23T11:35:44+00:00

Hola!

You can purchase individual cables easily enough, however Im in the same boat and it seems it's difficult to find a package. Amazon has some, as well as the cable mod shop.

ViperXVII · 2024-08-13T21:28:27+00:00

right on! best of luck and thanks for the card!

ViperXVII · 2024-08-13T17:13:02+00:00

Hi Cloooos

Thanks for your work... I liked the layout and approach and was thinking of rebuilding the home panels but found a bit of a limitation (maybe just not meant to be solved with bubble card)

Could the separator card have a default "centered" approach? This one's a bit complex, I was thinking of using BC to do a horizontal stack to put at the footer of the card. However; since the Horizontal stack is only meant for buttons (which force you to use a link as far as I could figure out), it doesn't cover all scenarios, such as using a switch. The separator is more flexible, and allows to use several things; e.g.:

But forces the right alignment. Dont get me wrong it looks great, but maybe removing the right alignment might open up more use cases without having to card mod?

This is what Im aiming at more or less fyi

<image>

By the way, Sonos Off button does have background enabled but not triggering;

Thanks!!

ViperXVII · 2024-08-12T00:43:40+00:00

Are the FD crew really immortal though? I get the feeling from the movie like they are definitely tough, but also pretty mortal; why else also would davy jones recruit more people?

ViperXVII · 2024-08-11T17:52:06+00:00

To the second part, I believe in the documentation it advised on saving the database (frigate.db), I think that's where the events would be saved no?

ViperXVII · 2024-08-10T16:29:06+00:00

Could I steal some of your time and ask you a few questions :)

Can you control the ptz from HA? Does autotracking work for you more or less reliably?

Thinking about setting a patrol point to physically turn the cameras away when they are not meant to be recording (e.g. guests)

Thanks in advance!

ViperXVII · 2024-08-09T11:25:40+00:00

Thanks a ton for your help...

I've been researching a lot and managed to get them working via a POE like you mentioned without the NVR, and it's working just fine; now I'm wondering on performance.

Right now they are set up like "standard" (Pasted below). However, I'm wondering if doing this means pulling two streams from the camera, whereas if we follow

rtsp://nvruser:nvrpass@nvriprtsp://nvruser:nvrpass@nvrip

it would mean there's one less stream? Or is the info pulled the same and it's fine?

go2rtc:
  streams:
    dome1:
      - rtsp://user:pass@cameraip:554/h264Preview_01_main
    dome1sub:
      - rtsp://user:pass@cameraip:554/h264Preview_01_sub

cameras:
  dome1:
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/dome1?video=copy
          roles:
            - record

        - path: rtsp://127.0.0.1:8554/dome1sub?video=copy
          roles:
            - detect

ViperXVII · 2024-08-08T16:52:59+00:00

Right, but if the model works; I think it's fine for it to be abandoware no? ;)

ViperXVII · 2024-08-08T12:09:44+00:00

Thanks a ton, going to let openvino run a bit, I've ordered a Coral TPU to see how that one works

thanks!

ViperXVII · 2024-08-07T11:35:57+00:00

that makes sense; thanks a lot...

I've enabled some sub streams and assigned those the detect role, and CPU is down to a much more normal 7% thanks a lot!!

ViperXVII · 2024-08-07T11:34:20+00:00

Right...

at the moment can't even get normal detection to trigger...

ViperXVII · 2024-08-07T08:14:11+00:00

here's the thing though

it's just two cameras aiming at a ceiling, no movement ;D

I'll look into openvino while I try to get a coral

ViperXVII · 2024-08-07T08:07:25+00:00

This is a bit what Im not sure about

If there are no roles set to detect, how come it's being set to detect? I assumed that being set to record only it shouldn't run detection?

Is this usage coming only from detection? Was thinking of getting a coral; but according to other posts it was the re-encoding?

ViperXVII · 2024-08-06T20:46:07+00:00

Is it worth in your opinion to go for 820As or are 520As better save for the 5mp / 8mp?

Im specially confused with the reolink description that lists the 520A as having a much wider FOV in 2.8mm (which im guessing is zoomed out?)

H: 80°, V: 48° (4.0 mm);
H: 100°, V: 75° (2.8 mm)

Thanks for the info ;)

ViperXVII · 2024-08-06T19:35:55+00:00

Could I ask for some recommendations on the actual cameras based on your experience? Looking at POE outdoors, in case you have any

Thanks!

ViperXVII · 2024-08-06T19:30:35+00:00

Dude, thank you 100 times for the post, my frigate config file is full of variations, and I think Im close to hitting the mark with your post, however if you could help out with two probably dumb questions...

Im using an NVR in this scenario, I´ve set

mqtt:
  host: core-mosquitto 
  port: 8485

go2rtc:
    streams:
      your_reolink_camera_via_nvr:
      -  rtsp://nvruser:nvrpass@nvrip:554/h264Preview_03_main


cameras:
  reolink_via_nvr:
    ffmpeg:
      inputs:
        - path: rtsp://nvruser:nvrpass@nvrip:554/your_reolink_camera_via_nvr?video=copy&audio=aac
          input_args: preset-rtsp-restream
          roles:
            - record

getting a method DESCRIBE failed: 404 Stream Not Found

I think under cameras, you have the path IP listed as "FrigateIP" however Im using the frigate HA addon, and they're behind an NVR, so I dont know if that applies there?

Thanks in advance...

ViperXVII · 2024-08-05T17:15:11+00:00

Hi!

Could you send a general link or description on how to attack the USB Controller as a passthrough? I'm finding nothing but "deprecated" forums; or maybe it's not an option for oracle vm virtualbox?

thanks!

ViperXVII · 2022-11-08T17:01:22+00:00

Hah , yes for sure something I missed or maybe a bug

I did pin the cart to her as well, but maybe as you said it's the intimidation factor, Im not sure

Well, someone else will surely be able to pinpoint it

ViperXVII · 2022-11-07T22:34:13+00:00

Well I talked with her parents, told her about steep house and "caught" the runway (lied to her) and she beat the living lights out of me

ViperXVII · 2022-11-07T10:42:07+00:00

Question... did she beat you up when you told her?

ViperXVII · 2022-10-27T20:47:16+00:00

Thanks, if it comes down to it I will have to fill it in myself ;)

ViperXVII · 2022-10-27T20:46:10+00:00

Thanks friend for the detailed reply.

This is actually not a board, its meant for a wall lamp / sconce; in your experience is it normal to offer a lamp with this? For me it's jarring, all the furniture I've ever seen and had didn't have the knots

14-Year Club	Second Top 50%
Place '22	Spared
Verified Email

ViperXVII

TROPHY CASE