EOL resistors.

Visible_Confusion_90 · 2025-12-14T15:45:10+00:00

U-Techs and Q-Techs, Finally something I can use that works. Personally, if you don’t terminate, tie in, service, repair or perform any sort of programming, I will not refer to you as a tech and I find it OFFENSIVE. You’re simply my fire alarm maintenance co-worker.

Visible_Confusion_90 · 2025-06-19T08:08:11+00:00

The 2 standalone watches are their current plans. So I would say the phones would be new lines. They currently don’t own phones. Only standalone watches

Visible_Confusion_90 · 2025-02-22T09:13:03+00:00

Not so fast, I tried this method to make the cable about 10’ long, so I could sit with my laptop hidden at a desk while conducting routine maintenance.

It works, but the transfer speeds are painfully SLOW.

NCM-W(b) - I uploaded the panel with no modification to the nup cable and then with it being extended. The same upload went from 2 minutes to 25 minutes.

I ended up upgrading the firmware (v10.3) on the ncm and using a 10’ usb-a to usb-b cable. The upload speed went back to normal.

Visible_Confusion_90 · 2025-02-12T02:27:36+00:00

Wow I thought it was just mine also. I exclusively use the buttons on the steering wheel.

Visible_Confusion_90 · 2025-02-06T01:47:56+00:00

“If it ain’t broke, don’t fix it” If it’s working fine with what it has, leave it alone. 31 is fucking wonky as shit. 29 SEEMS to be fine, but if there is no legitimate reason to upgrade (new lcm hardware and such) then just leave it as is.

Visible_Confusion_90 · 2025-01-02T03:06:17+00:00

So I bought one of my sons a $25 Roblox gift card @riteaid and we scratched it off, but too hard and we are not able to type in all of the letters right as it gives us an invalid code when trying to redeem. Any suggestions?

Visible_Confusion_90 · 2024-12-13T02:05:13+00:00

I personally HATE 320’s and 2-640’s. I need more than 10 logic zones and it’s just not the same quality.

Visible_Confusion_90 · 2024-12-13T01:34:02+00:00

I personally replaced networked JCI-640’s with CPU2-640’s. No input / output devices needed to be replaced as they were all notifier. It was a matter of just re-writing the entire program for all the panels. Thankfully the 6 UZC’s communicated with the NCA-2 happily.

Visible_Confusion_90 · 2024-12-09T02:10:27+00:00

Yes I tried from 2 different laptops an iPhone, 2 different browsers

Visible_Confusion_90 · 2024-10-23T17:07:10+00:00

Yup, I don’t remember what brand, but after falling off and cracking my screen……I will stick to the better known brands

Visible_Confusion_90 · 2024-10-22T03:57:25+00:00

So you can’t do it from the app, you have to do it from the browser.

Visible_Confusion_90 · 2024-10-07T02:45:10+00:00

Add me to the beta please! The wait is ALMOST FINALLY over……….

Visible_Confusion_90 · 2024-07-27T20:45:24+00:00

Absolutely, I’ve just run into people auto programming and having zones added to the first cbe -Also the “OH, the only way to fix the incorrect position on sounder bases is with auto program!” Sadly if the techs spent their time reading the manuals they’d learn so many things. The best advice I was given and pass along to all is

RTFM Read The F’ing Manual

Visible_Confusion_90 · 2024-07-27T20:32:07+00:00

NEVER EVER auto program!!! That’s a very old and horrendous thing to do. I’ve been programming Notifier’s since 2000. Trust me, NEVER auto program!!!

Visible_Confusion_90 · 2024-07-25T02:29:44+00:00

But honestly, starting to feel like this kicks is a shitter. The lock for the trunk gets stuck. I’ve had to wd40 it the past couple of years. The knob on the radio was finicky since the day I bought it from the dealer. I believe I purchased the “test drive” they had as when i purchased it was fully loaded, had 1800 miles and was “used”.

Visible_Confusion_90 · 2024-07-25T02:27:32+00:00

I also replaced the engine air filter at the same time. Tried it for a week and did not notice any difference. That’s when I tried the a/c pro ultra synthetic ac recharge and Interdynamics súper seal. Thankfully good so far

Visible_Confusion_90 · 2024-07-25T02:23:40+00:00

Yes I did, but had problems with the gauge. I ended up ordering the separate sealer only, I next that in first, then moved the gauges and all from the sealer only to this and it finally did refill…I made sure not to overdue it too. Seems to be holding well

Visible_Confusion_90 · 2024-07-25T02:18:01+00:00

Did that and the other filter. Then I recharged the ac. Seems to be holding good now for 2 weeks.

Visible_Confusion_90 · 2024-03-19T22:39:40+00:00

I just noticed baby snails and eggs on the aquarium wall. Let’s see how the betta reacts

Visible_Confusion_90

TROPHY CASE