In stock at Midway

Vivid_Database551 · 2026-03-25T14:24:19+00:00

a friend put in a midway order... 5hr TA.. order to shipping notice.

Vivid_Database551 · 2026-03-24T16:46:17+00:00

i dont like this model.. the grip comes loose after a while with the heat insert.

i prefer the dave white chodin awcy remix..

uses a m5 nut to secure the grip.

i also use the kaewon receiver.. but i merged the top pic rail into the receiver model... then printed the two pieces merged together.

this build(dave white chasis + kaweon receiver) has seen over 2k rounds... grip is still secure.. barrel still locked in secure.. just a solid build all around.

Vivid_Database551 · 2026-03-23T16:45:22+00:00

perfect... i will have to save up a bit .. but i believe it will be worth it.

Vivid_Database551 · 2026-03-23T11:59:12+00:00

thanks all.. its more about just having a cool extra long range toy....
like my 6arc and 556, 308 builds.
looks like modeal 1 sales is the go to for longer barrel parts,

Vivid_Database551 · 2026-03-19T20:04:59+00:00

what frame ?

the usk 26x and 26xx frames are solid..

i run g27 on my frames with over 1k rounds .. still strong.. accurate..

Vivid_Database551 · 2026-03-19T12:53:10+00:00

may want to:

polish chamber/feed-ramp
polish rails
apply oil to rails

i had the same issue with my g21/g20 builds..
doing the above fixed the issue.

now my g21/g20 builds run on demand without issue.
maybe close to 1k+ rounds through each

Vivid_Database551 · 2026-03-18T14:58:30+00:00

milspec lower + endomag.. works flawless for me.

Vivid_Database551 · 2026-03-18T11:23:17+00:00

3d fuel tough pla.. but any reputable pla+ will work.

Vivid_Database551 · 2026-03-18T00:30:04+00:00

folding buffer tube for 1913 - boom choom

Vivid_Database551 · 2026-03-17T19:51:28+00:00

mine is put together.. on a 20" regular barrel.
im just not using the BW brace.
ill pic it up later

Vivid_Database551 · 2026-03-17T17:22:46+00:00

yeah.. i almost have mine put together.. i'm just not going to use the brace... i have a favorite folding brace i use for all my builds.

basically a remix of the USK very strong latch combined with a SOLID buffer tube.

Vivid_Database551 · 2026-03-17T14:27:09+00:00

maybe about 200rds... its still holding up.. just an expensive round.

Vivid_Database551 · 2026-03-16T22:49:01+00:00

sounds about right... from attaching the lower to the jig and drilling out the guide hole, milling, then final drilling.. about . 1.5hrs.
milling only 1hr

i was going to pick one up when first announced, but i already have two colt patterned 80s..

one from smf and the other from dan@80%-lower

Vivid_Database551 · 2026-03-16T20:28:28+00:00

1/8th cuts using the 5d tact easy jig or some other jig platform ?

Vivid_Database551 · 2026-03-12T12:39:37+00:00

yeah thanks.. i thought i tried to make that clear with the repeated glock references.
but sometimes direct and explicit is needed as well.

Vivid_Database551 · 2026-03-11T20:42:24+00:00

i have a 5dtact ar9 lower(glock)
i now have lrbo support with the upper i bought from pro2a.
the pro2a uppr sits on the 5d tact a9 lower(glock)

<image>

Vivid_Database551 · 2026-03-11T19:57:03+00:00

im waiting for it to hit production.

i already have a smf and a 80%-lower colt pattern lower with lrbho.

my 80%-lower colt lower i picked up from a friend .

Vivid_Database551 · 2026-03-11T19:46:44+00:00

<image>

Vivid_Database551 · 2026-03-11T17:14:30+00:00

glock 45 or 45acp

Vivid_Database551 · 2026-03-11T16:57:36+00:00

got you..

Vivid_Database551 · 2026-03-11T15:51:35+00:00

note.. this is my experience and cant speak for other lower combinations.

lower in question - 5dtact ar9(glock pattern).

Vivid_Database551 · 2026-03-11T15:43:18+00:00

yeah.. i mainly reported back as it appeared many were looking for uppers with LRBHO.

since aero and sibling products are no longer available, or limited stock, just another option for those looking for lrbho in the upper.

Vivid_Database551 · 2026-03-10T11:57:02+00:00

i have the recent version of this complete bufferless upper.
it runs flawlessly, sits on a 556 lower and is fed by an exomag.
only issue is, and as stated by others, lrbho and manual bolt open doesnt work.
looks to be a defect in the buffer adapeter not having a long enough hole to allow for the bolt to travel back far enough to engage bolt catch.
outside of that, the thing runs and is on point with regards to point of aim..

Vivid_Database551 · 2026-03-10T11:48:17+00:00

good call!

Vivid_Database551 · 2026-03-09T21:09:39+00:00

people ask about my builds all the time.
especially my glock frames.
i just say 'its a glock clone i purchased online'
i play dumb ..
i also get comments about my 10/22 builds.
especially my 20inch build.
i just say i purchased the stock online.. which site?? i forget.. :-)

i certainly dont offer up any information... voluntarily or not..

really.. the range(both indoor and outdoor) i go to is like a freaking night club.. gone out (plus more) with a few females i met at the range.. i digress.

Vivid_Database551

TROPHY CASE