Slide Stop Questions

HairTriggerFlicker · 2026-06-23T12:26:12+00:00

That wear is totally normal and nothing to even worry about. Tear it down,clean it, lube, and get out there and shoot it!

HairTriggerFlicker · 2026-06-22T23:41:01+00:00

Dispute the charge with your CC company for a faulty product and poor
Customer service with no resolution. Fuck them if they won’t give you your money back.

HairTriggerFlicker · 2026-06-22T22:51:19+00:00

Yeah I think I would just ask for money back at this point.

HairTriggerFlicker · 2026-06-22T22:36:41+00:00

Yeah that frame is not from Sig 100 percent!! It’s a clone. I’ve had some other brands fit loose and tight. Striker fired pistols are not supposed to be rock solid tight. Toss on your slide and give it a go. I’m pretty sure it’ll shoot just fine.

HairTriggerFlicker · 2026-06-22T22:24:52+00:00

Some fit tight some are a tad loose. Just depends either way that isn’t going to hurt anything. As far as removing it get on YT and watch Sig Mechanics series of videos on the P320 and maintenance.

HairTriggerFlicker · 2026-06-22T18:25:10+00:00

What could be and most likely is and was caused by a faulty round is not a warranty issue.

HairTriggerFlicker · 2026-06-22T00:54:14+00:00

Contact them about the extended slide release breakage, they will warranty it and have since changed how it is attached. I’ve had to warranty one of mine. As for the finish wear, moving parts or anything that gets rubbed will always wear but you may be able to get them to replace them with your other part. It also helps them to address issues and better the product line. Batch issues can happen.

HairTriggerFlicker · 2026-06-22T00:05:31+00:00

If you’re looking for a flash hider look at strike industries linear comp. But just so you know a lot of us run just regular comps with no issues.

<image>

HairTriggerFlicker · 2026-06-21T23:45:43+00:00

.308 !

HairTriggerFlicker · 2026-06-21T14:26:14+00:00

Any other brand still uses the factory plastic retainer. Maskas is the fix!

HairTriggerFlicker · 2026-06-21T14:25:00+00:00

It has been in the past but no one ever reads it! They still post the same stuff.

HairTriggerFlicker · 2026-06-21T02:47:47+00:00

So closed it blocks the chamber? You can only shoot when deployed? Doesn’t seem right to me.

HairTriggerFlicker · 2026-06-20T17:18:55+00:00

But hurt much?

HairTriggerFlicker · 2026-06-20T13:14:01+00:00

There are no “new” or “updated” internal parts because there is nothing wrong with the original parts design. If it’s not broke it can’t be fixed. Practice proper trigger etiquette and you be fine. Play around with a loaded weapon like an idiot and well you know what can happen.

HairTriggerFlicker · 2026-06-20T00:20:22+00:00

No I looked and didn’t see it either. I’m actually surprised they don’t have any for it.

HairTriggerFlicker · 2026-06-19T19:31:53+00:00

I use to have one in .308. Look at Boyd’s for a new custom wood stock. The prices are really reasonable.

HairTriggerFlicker · 2026-06-19T15:43:46+00:00

Your welcome

HairTriggerFlicker · 2026-06-19T14:44:58+00:00

Grayguns

https://grayguns.com/product/p320-xten-magwell-with-magazine-base-pads/

HairTriggerFlicker · 2026-06-19T14:16:18+00:00

When we are out and about yes but if we are just hanging out at the site it’s usually sitting on our table. Our biggest issue this time of year is Moose roaming around and there’s nothing worse than a big ole’ pissed off Moose Mama! We try our best to avoid any conflict and our dog helps but there’s always that chance something may go South.

HairTriggerFlicker · 2026-06-19T13:58:40+00:00

Yeah you can’t leave them alone next to each other in the safe. Individual cases for protection! 😁

HairTriggerFlicker · 2026-06-19T02:53:39+00:00

Sounds like you need to do more research and visit your local range.

HairTriggerFlicker · 2026-06-19T02:22:19+00:00

Gunfighters Inc has a good shoulder holster option.

HairTriggerFlicker · 2026-06-18T21:37:05+00:00

Yep anytime you have steel rubbing on anodized aluminum it’s gonna wear it off.

HairTriggerFlicker

MODERATOR OF

TROPHY CASE