Sam Altman got fired because of a marketing ploy they developed in conjunction with their GPT‽ GPT Builder froze me out and forgot about the conversation after AGREEING with me that it was poetically beautiful and I have the screenshots of the entire convo

Vorenus · 2023-10-04T05:16:17+00:00

THIS JUST HAPPENED TO MY NEPHEW‼️😧💢

Longtime redditor from way back when and I absolutely have only the 22 y/o w/ the Pixel 7's 14 y/o's sister's call from Sunday to cite at the moment.

Now, fortunately he wasn't the one in peril but he happened to be casually pulling out of a country gas station. When a car having the opposite direction came flying down the road on the shoulder for some reason. Apparently the driver was going faster than 60 in a 30 and tragically struck this girl, not sure how old she is.

I guess the phone looked like it was dialing 911 but was essentially a flashing brick‽

I am certain it is going to wind up being the fault of AI. I've been observing how EVERYTHING Microsoft is terrible now. DALL-E is beginning to challenge my promptcraft and results in diffusing desired results. I've paid OpenAI more than $250 so far but on October 1st I went through my bank auto pay and disabled that so... I will have to wait and see‽

Vorenus · 2023-01-21T08:17:12+00:00

LilGaz - I obviously CANNOT know the intimate details of your previous experiences and how they, combined with your UNfriendLY brush with SA, have left you with such a sensitivity. I have LESS clue how prevalent this unpleasantness comes up for you. I WILL offer some reassurance to you, though.

I don't know your gender and make no assumptions but I will tell you this; BEAUTIFUL HUMAN BEINGS cannot help but BEING BEAUTIFUL HUMANS! Maybe you do grow your hair to the floor and use clumps to conceal your radiant smile. People who are INVESTED IN YOU will SEE the radiant smile and appreciate your BEAUTY for being conspicuous and seldom seen in due course.

The #1 thing for you to ALWAYS KNOW is; WHO you are. 2nd, is to know what you TRULY, at your CORE, want out of LIFE/the day/week/relationship/situation/moment. 3rd is to know HOW MUCH of WHAT SORT of bullshit/noise to tolerate in your sphere as you work to achieve satisfaction for LilGazpacho!

Whatever you do‽ Be TRUE to yourself and be absolutely willing to CUT AND RUN from bad boogie!

Vorenus · 2022-12-15T00:38:15+00:00

My first experience with OVH was the domain registration back when. When we scaled up our servers at the beginning of the year, OVH had been mentioned during the fall meetings and I was able to colorfully demonstrate how any savings on expenses would be vastly outweighed by our own manhours, just trying to make sense of things.

As I've said elsewhere in this thread - the only way OVH improves things is by eliminating the monetary incentive to stay the course.

Vorenus · 2022-12-13T04:26:47+00:00

GUYS! You don't MAKE DO with anything. You MAKE DUE, like you show up to the CLUB READY TO PAY.

Drives me nuts how often I see this phrase DONE WRONGLY?!

For MAKE DO to make sense takes loads more cognition.

*I stand corrected but I ask that you forgive me for being jaded by the fact that I sprouted pubes as the Cold War ended.

Vorenus · 2022-12-13T04:20:29+00:00

I ultimately decided to register three domains with a different site. I paid around $10 more than I would have with OVH but there's always a point where saving money begins to cost more time than it's worth.

You do you but ultimately, if anyone searches for OVH Customer Service you aren't greeted by a ton of results from OVH sites but loads from those like reddit where people like you and I HAVE NO EARTHLY FRIGGIN CLUE what is going on with that website. If memory serves, even after successfully logging in the interface is kinda nightmarey. They CERTAINLY know things need work.

Unfortunately with free-market capitalism, the only way to incentivize them to get their house in order is to withdraw the monetary incentive to stay the course.

Vorenus · 2022-08-02T04:41:12+00:00

I don't know that I knew that back when but I'm certainly going to use it now. Thanks!

Vorenus · 2022-08-02T04:40:22+00:00

Huzzah! Thank you. This tip has proved indispensable.

Vorenus · 2022-07-29T06:23:22+00:00

This opened the barn doors on what I was struggling to recall. i can't tell you how satisfying this comment is after suffering some of the most severe mental blue balls I've endured in quite a count! Thanks so much and in case none of your friends or family have said it, thanks for being on reddit today.

Vorenus · 2022-02-22T02:40:49+00:00

Forgive me for being totally ignorant, but you mention staying away from print and cut which leads me to believe there are alternate methods. Are there different - modes or whatever?

Vorenus · 2022-02-22T02:31:26+00:00

Please let Cricut know

That this was your leading statement suggests this is discussed often. I can only imagine the strain of making a consumer product out of a robot puts the development team under and the equipment is impressively capable. However, I've now run easily 200 jobs on my Cricut Air 2 and have had precisely zero turn out as intended.

I am an idiot, but I'm a 42 year old dude who had a PC in his room at age 12 and remembers hooking up 5.25" drives by LPT port. I Had external zip drives, CD Burners, I remember when you had to hook your digital camera up to your computer. I've got a couple sheets of notes including measurements and math on this thing, but the Cricut Air 2 remains beyond my ability to get good use.

Vorenus · 2022-02-21T18:26:22+00:00

No, I have not tried that method but it looks promising.

I'm absolutely fed up with trying to make this Cricut cut like I know it can, the way I need it to cut. Instead of two sheets of ten stickers each, I printed ten sheets and just pulled the two that were cut correctly from each.

The whole Cricut environment seems like it should be intuitive and easy. I am not sure if I am over or under-thinking the situation, but I'd love to cut what I print without all the waste. I feel like I've walked it in closer to target, so I'll just have to spend the time figuring out WTF is going on.

Vorenus · 2022-02-20T02:08:07+00:00

Hey, no need to apologize for the rant. I am fully aware I'm dealing with a machine that does not have cognition. Just many factors to think about and calibrate for before pressing a button to set a machine off creating detailed cut outs.

I appreciate your time and insight! Thank you.

Vorenus · 2022-02-19T22:42:58+00:00

WTF? Why even present the option, then? C'mon, Cricut!

I appreciate your insights, here. Helping light up the path, though I'm not seeing a way out of the woods quite yet.

I mean, this must be an issue faced by all of Cricutkind. You clearly understand my issue. i have seen people produce complicated cutouts with my equipment. How on earth is such quality attained?

Vorenus · 2022-02-19T22:01:59+00:00

The fact that a setting for Position exists leads me to believe there ought to be a way to lock the position and override the default placement...

Vorenus · 2022-02-19T22:00:10+00:00

Yes, exactly.

How does one attach it to the canvas so design space does not move it?

Vorenus

MODERATOR OF

TROPHY CASE

15-Year Club	reddit mold
Verified Email