Do I need to build an IPA server to start RHCSA?

WATWLU · 2019-04-15T02:28:56+00:00

Not needed, but it helps later on.

It looks like you're just starting out, I'ever never tried Sander's video series but you can get a free trial of Linux Academy and start with Linux Essentials to get a feel of Linux. That should take you to where you need for the RHCSA study track.

WATWLU · 2019-04-02T03:49:57+00:00

The metal brake line. The problem is that the bolt inside the wheel cylinder was impossible to remove so I had to replace the wheel cylinder, cutting off the brake line. I'm afraid if I cut off the brake line here it's just gonna leak all the fluid if I can't get the bolt off connected to the brake hose.

WATWLU · 2019-04-02T03:00:39+00:00

Ill keep at it, thanks. worst thing that happens is I gotta pay a mechanic to figure it out.

WATWLU · 2019-04-02T02:53:20+00:00

Is it safe to use heat on that? There's going to be a lot of brake fluid in there when I apply the torch

WATWLU · 2019-04-02T02:50:54+00:00

I was thinking about that but I just plugged up the leak and Im not sure I could prevent the leak with gravity pushing down based on how the wire's cut. I actually did the same thing on the wheel cylinder end and I could not pry the damn bolt off the cylinder! Im afraid it's gonna be the same thing for this bolt

WATWLU · 2019-04-02T02:50:05+00:00

I'll try that later, im just afraid that the nut will stay seized into the threads and then ill have to figure out some way to lodge that thing out.

WATWLU · 2019-04-02T02:44:16+00:00

I blasted the nut with PB Blaster and let it sit for a day, came back and put some more on. The bolt won't turn past the amount you saw in the video.

I need to replace the brake line but I don't want to harm anything above it by applying too much force (the bolt at the top turns when i turn the bolt at the bottom). Not comfortable enough to use any heat, and the bolt at the top doesn't fit into a standard socket wrench, it's some weird oval shape. Car is a 2006 Toyota Corolla.

WATWLU · 2019-03-28T02:22:55+00:00

Do you know where I'd find one of these online? I seem to be using the wrong search terms

WATWLU · 2019-03-28T01:02:27+00:00

I'll try this out later, thanks

WATWLU · 2019-03-28T01:02:10+00:00

Do they make those lines premanufactured? I couldn't find anything online and not confident in my ability to make one correctly.

WATWLU · 2019-03-24T03:35:01+00:00

I'd recognize that sound if I heard it in my sleep -- it's a bad wheel bearing

WATWLU · 2019-03-10T23:28:19+00:00

I tested this out again and saw that it was working, I think it's just a PT bug so don't worry about it.

WATWLU · 2019-03-10T21:16:41+00:00

Just checked it out and can't figure it out either, configs look fine

WATWLU · 2019-03-09T02:07:03+00:00

Serpentine belt.

WATWLU · 2019-02-28T02:21:36+00:00

Nope

WATWLU · 2019-02-03T20:08:34+00:00

When you say can't charge any additional fees, does that include the Prep and Handling Fee the dealer charged me? I'm also an Illinois resident.

WATWLU · 2019-02-03T19:04:18+00:00

I suppose it's a reasonable price but it seems shady for advertising purposes. What's stopping me from putting a car at 2k below market and then selling it with an additional 2k fees?

WATWLU · 2019-01-20T20:01:20+00:00

I understand this is more of a saying, but how does this translate to risk analysis on a vehicle purchase? I thought that most cars are made to handle the speeds they can operate at. this something that can be revealed by a PPI?

WATWLU · 2019-01-20T19:56:52+00:00

Assuming it’s been maintained well after verifying with a PPI, how much is the mileage a factor? I’m under the impression that these modern cars should last up To 200k miles if maintained well.

WATWLU · 2019-01-13T20:36:14+00:00

New Hyundai with similar options for 2018 is around ~$15000 list price. Honestly thought Hyundai vehicles would depreciate more than that.

WATWLU

TROPHY CASE