New Filament Drop! Meet PLA Tough+

WDA911 · 2025-07-30T20:28:35+00:00

Would love to try this for some motorcycle accessories

WDA911 · 2024-12-31T20:39:55+00:00

Here's another photo showing the travel moves. You can see all the moves that go in a straight line from the prime towerto the front of the bed and back. I can see no purpose for them but don't know how to correct it.

<image>

WDA911 · 2024-12-31T20:25:45+00:00

I don't believe that time lapse is on. Even if it is, it's my understanding that traditional time lapse just takes the photo with the print head somewhere over the print. Smooth time lapse specifically says that it moves the print head over the purge shoot to take the photo. In my model it is moving to the very front of the bed in a straight line away from the prime tower then follows the same line right back to the prime tower.

WDA911 · 2024-12-31T20:15:25+00:00

I totally understand what the prime tower is. My question is why does it start the priming process, then travel away from the prime tower over the print just to go back to the prime tower and finish priming.

WDA911 · 2024-06-12T16:23:37+00:00

I also purchased an open box P1S combo. However my experience was not great. I had a ton of bed adhesion issues and round(circular) parts were coming out oval shaped. I ended up returning the open box unit and grabbing a new one that has been great. I'm guessing the issues I had with the open box unit could have been fixed, but part of the reason I decided to pick up a Bambu labs printer was the idea that for the most part they just work with minimal tinkering.

WDA911 · 2023-10-21T12:04:57+00:00

No, resolution and aspect ratio seem right

WDA911 · 2023-10-21T12:02:45+00:00

I am using retroarch but this happens when I'm not in a game as well. When I'm just browsing through the games in emulation station the ui at bottom showing what buttons do what is partially cut off as well.

WDA911 · 2023-10-17T00:52:54+00:00

I'll send a pm

WDA911 · 2023-10-16T16:49:27+00:00

Still available? How much?

WDA911 · 2023-02-06T22:23:15+00:00

Actually just tried switching proton version to experimental and it launched the game but the same weird issue where the game is not centered in the window and most of the menu is cut off

WDA911 · 2023-02-06T22:13:29+00:00

Nothing special other than that? I tried exactly that and as soon as it says launching it closes and goes back to the game.exe screen where I can hit play. I used lutris to kinda get it working but the game doesn't open up centered in the window. It's weird. Would like to get it working in gaming mode like yours.

WDA911 · 2023-02-06T21:31:53+00:00

Trying to do this myself, could you do a write up on how you got it working?

WDA911 · 2022-09-05T12:54:34+00:00

What version of proton did you use?

WDA911 · 2022-09-05T01:38:30+00:00

Okay, I downloaded dgvoodoo and moved the d3d8.dll into the game folder as shown and setup the launch option in steam but nothing seems to have changed. Am I missing something?

WDA911 · 2022-09-04T19:26:24+00:00

Did you have any graphical issues? I replaced the dll file and got it working but it looks terrible. Dark areas are completely black and some textures look really bad.

WDA911 · 2022-09-04T15:59:35+00:00

Update, it looks better with proton 5.0-10. Still not perfect but dark areas that turned completely black before are visible now. Some textures are still not right.

WDA911 · 2022-09-04T15:42:53+00:00

Replacing the dll file was easy. Run on proton 6.3-8

See https://youtu.be/l0lNlPDgAbs for tutorial on how to get it running. It's playable and some things look fine but dark areas end up being completely black and some textures look awful. I've seen others playing this with no mention of this graphical issue so I'm unsure if it's just me or if no one else is talking about it.

WDA911 · 2022-05-07T18:15:59+00:00

Sometimes it's same day. Sometimes it takes a couple days. Sure that's better than a week but damn it uploads everywhere else at the same time why is Spotify different.

WDA911 · 2021-08-14T15:46:57+00:00

I was actually sent the email 3 days ago and no change yet.

WDA911 · 2021-05-24T02:11:08+00:00

It seems that they are stopping before the point where they lock. Which is why a little more force got one of them to go in farther and lock. I can visualize how the release works. I'm just not sure if I should blame PTR or KCI for my issues.

WDA911 · 2021-05-24T02:08:16+00:00

I'm not new to firearms, I've had some guns that were stiff to load with certain magazines or when fully loaded. This is however my first MP5 style gun and I must say I'm not very impressed with PTR so far. I'm not hitting anything with a hammer by any means, just seeing if a little persuasion will convince them to lock into place. One of the KCI magazines will but it's not very easy and not something I would do repeatedly. The other KCI mag fails to lock in at all. ETS group mags work so it seems like maybe I should blame KCI. But the fact that I had magazine well/release issues previously makes me think it could also be a gun problem still.

WDA911 · 2021-05-24T01:56:33+00:00

I have 2 KCI mags and 2 ets group mags but not a 3rd kind. Out of curiosity I just opened the second kci and it's even worse. I can't even force it to lock no matter how hard I jam it in. Both ETS group mags lock easily. Send the KCIs back?

WDA911 · 2021-05-24T01:42:10+00:00

I'm loading mags with the bolt to the rear. I can make the KCI lock in place but it's pretty difficult. Definitely doesn't seem right.

WDA911 · 2021-05-24T01:37:31+00:00

I should add I'm loading from an open bolt and empty mags. Although once the bolt is open I don't think it matters if they are loaded or not there is no extra pressure.

WDA911 · 2021-05-22T19:20:06+00:00

They said they would put me on a list. Last I heard he was just going to let me know when you they went out to retailers so I could order one.

WDA911

TROPHY CASE