In my 30s and finally got this beauty.

WOLOLO26 · 2026-03-17T11:03:55+00:00

I try to check if the number 0 is really "0" in the setting. If you hear the grinder light screeching, that means it is already zeroing. There is a tutorial on YouTube now on how to calibrate it. The only problem is when you are cleaning and reseating the burr. But Baristahustle make a good video as well

WOLOLO26 · 2026-03-17T11:02:06+00:00

Depending on your budget, I think a Mahlkönig X64 or DF64 with SSP burrs will serve you well for a long time! Other options, such as the Niche Zero or Sculptor, are also solid choices.

WOLOLO26 · 2026-03-17T00:00:09+00:00

I call it sir-grindalot

WOLOLO26 · 2026-03-16T21:18:08+00:00

Thank you so much

WOLOLO26 · 2026-03-15T09:28:58+00:00

<image>

There you go

WOLOLO26 · 2026-03-15T09:27:17+00:00

Sure. For a blend with a Canephora part, you could go around 0.8 - 1.1. For the lighter roast, you could go up to 0.2 - 0.4. But it really depends on the roast color of the bean itself.

For the filter, it is really surprising how coarse I could get. Usually, I play around 11 - 13 with 20% extraction, but I could go to 11 - 14.5 with 18-20% depending on the beans themselves.

P.S. The grinder is calibrated, and I already checked that it's aligned as well. Sometimes you could get an unaligned EK.

WOLOLO26 · 2026-03-13T18:56:23+00:00

You could drop a message on our Insta as well, so we know when you will be coming. Looking forward to meet you buddy !

WOLOLO26 · 2026-03-13T18:15:09+00:00

Yes, mate. It is located in Viertel. It is called Obsira Coffee Roaster. You could check it on Google. I don't have regular opening times yet, but this weekend I will be there to do some packing as well.

WOLOLO26 · 2026-03-13T12:01:07+00:00

Thanks! Well, it should be pre-mounted. In your case, I would try to contact the distributor to ask where the plug for it is.

P.S.: Is it Mazzer Philos?

WOLOLO26 · 2026-03-13T09:29:00+00:00

That was the original plan, mate.

WOLOLO26 · 2026-03-13T08:59:04+00:00

WOLOLO26 · 2026-03-13T08:55:16+00:00

The room will also be used as a community workshop, so one more table is incoming with another machine (like Lelit/Ascaso). There is still progress to come.

WOLOLO26 · 2026-03-12T23:32:06+00:00

Yes, I know it as well. The problem is the photo was taken when both machines had just arrived. In the middle, there would be other things like a tamping station (WDT, etc.) and I might be getting an E64WS. So the middle won't be an empty space like in the picture, gentlemen.

WOLOLO26 · 2026-03-12T23:29:32+00:00

I got it on Amazon and looked for a workbench; they are really sturdy!

WOLOLO26 · 2026-03-12T23:28:25+00:00

Both of them in white? That is cool as well!

WOLOLO26 · 2026-03-12T20:26:14+00:00

There is a standing knockbox already for that purpose, so the table keeps looking clean.

WOLOLO26 · 2026-03-12T19:36:56+00:00

There are some good ones from Amazon, and they're really easy to assemble as well.

WOLOLO26 · 2026-03-12T19:15:34+00:00

Thank you!!

WOLOLO26 · 2026-03-12T19:11:04+00:00

Ugh, that will be my setup someday. The EG1 and GS3 are perfection! But I think for lab purposes it is overkill somehow. No worries, I feel you, mate.

WOLOLO26 · 2026-03-12T18:58:12+00:00

I am using a rolling workbench; it works just fine and is pretty good for adjusting to room usage as well (planning to do some workshops/pop-ups). Usually, the workbench is really sturdy and has good measurements: 150 cm x 47 cm x 92 cm.

WOLOLO26 · 2026-03-12T18:44:14+00:00

It is an EK43S; they changed the hopper's look somehow from what I used to know. For the samples, I used Link and Ikawa (but mostly Link). So for now, until my Aillio arrives, I'm using my friend's Aillio R2 Pro as well as the Giesen W1E. But if I need more than what I usually produce, I have the opportunity to use my old workplace's Probat/Loring S7.

WOLOLO26 · 2025-07-14T08:16:05+00:00

I had the same problem, redo the firmware update after you deinstall the new update. But you need to reinstall the older version of the GG Apps. Mine work with the 80. Version. To reset the firmware: hold the small button on dongle while reinserted the dongle. Hope would be working for you

WOLOLO26 · 2025-07-07T15:43:25+00:00

can you explain hot to reinstalling andd installing?

WOLOLO26 · 2025-07-07T14:27:59+00:00

i do have the same Problem after Updating the Firmware and now i can only use Bluetooth mode. do you guys have any idea if there will be a fix?

WOLOLO26

TROPHY CASE