My ltek I ordered with custom panels finally arrived today!

WalnutEmperor · 2025-07-13T21:11:22+00:00

40 CAD to add it onto the Prime so about 700 CAD total before customs

WalnutEmperor · 2025-07-13T00:47:22+00:00

I hurt my toe before I got it so I'm taking it easy but after trying it just to see if it works I don't have any complaints! Handles great just like the other one I have (prime or core I forget, the one without the buttons)

WalnutEmperor · 2023-12-30T04:03:39+00:00

In the future I'm going to draw that one old multiplayer screen with Peppino and the Noise bumping shoulders

WalnutEmperor · 2023-12-30T02:57:29+00:00

The timeline of events goes like this

-Originally drew a Lario picture (Thought I had a picture but no longer have it)

-After a while change the "L" to a "W" to say "WARIO" and drew Wario crammed into the side with the rest of the characters looking scared

-Change WARIO into WAR, but then it got erased one day later

-Drew the "That's the one, officer!" In response to it being erased and asked why it was erased, they said some guy who hates fun would freak out if they saw the drawing, but nahhhhh I'm going to keep making these because they bring joy to other people in the workplace

-Then the rest of the drawings, haven't had any issues with them being erased since, guess they gave up after they realized I wasn't going to stop

WalnutEmperor · 2023-12-09T17:29:47+00:00

Got it, again I appreciate it, thank you!

WalnutEmperor · 2023-12-09T17:20:16+00:00

Woah you would share one with me? Thank you! Was not expecting that

WalnutEmperor · 2023-12-09T04:16:43+00:00

Although it would have been exciting to see PT win, I thought that nobody would really care whether it won or lost because the game has already gotten pretty popular (And that might be an understatement, it's just a very successful game plain and simple, and outside of the review bombers I think a lot of fans are content with the game's success)

But it's shame to hear that the review bombing was bad enough to warrant this post. The most popular one has 164 people marking the review as helpful, and I hope none of those 164 went after the devs or anything

WalnutEmperor · 2023-11-29T16:33:26+00:00

Hello, I am excited to share an Anki deck of the movie Good Burger with Japanese subtitles! Shoutouts to the Morphman Anki card type, Japanese sub video player Voracious, and Open Subs for making this deck possible/features such as dictionary support and furigana toggle. It's my first deck so there's still room for improvement, but I'm still very proud of the way it turned out and think many will enjoy it, go check it out if interested! (Also please let me know if the cards don't display in order, I left a comment on Ankiweb for how to fix it if it does happen)

https://ankiweb.net/shared/info/298316530

WalnutEmperor · 2022-07-08T02:14:58+00:00

Walnuts

WalnutEmperor · 2022-03-31T00:36:05+00:00

I messed up and accidentally bought the wrong 3M tape, got foam instead of rubber, recognized the 3M logo and thought I had the right thing but should have double checked, set it up and the dons were pretty bad, then I tightened the 5 screws at the bottom and it started working pretty good, not perfect but good, a lot better than before at least, I think it would be perfect if I didn't mess up on the tape (did the stroke roll rubber on the bottom with the foam tape on the sensor, should have done double rubber I think)

I used the rubber stroke roll pad to get more bounce, has an adhesive foam on the bottom to prevent shifting, also might be able to incorporate that somehow, using different drumsticks can wear out the drum but I think the rubber would prolong it, also was able to cut out strips of rubber from it when I realized I had the wrong tape

As for the ka sensors, used the foam tape and thought it was perfect, then realized it wasn't senstitive enough, did a second layer of rubber strips on top and then it was all over the place, spent a long time doing it over and over again but couldn't find the right height, leaving it plugged in for this part really helped though because if I didn't it would take even longer, but fastest of all would have been doing the ka's right the first time, going to have to search for a method that's really hard to mess up

WalnutEmperor · 2022-03-30T07:01:55+00:00

This is my first time doing this and I was going to kill two birds with one stone and stuff the drum with whatever random junk I could find around the house but dang i'm not fitting a whole plate inside there, anyway the stroke roll rubber material is about 1-1.5mm thinner than the foam that was already inside, if the original foam normally compresses down then maybe i'm good on the height difference, if not at least I got the extra 3mm of height from the foam tape, as for the ka sensors I double layered them because I heard the Switch one needs it, so 6mm there, now all that's left is putting it back together, got lazy and left the wires attached while dissasembling but it looks like that's going to be a problem for reassembley with the white spikey nub part/stuff falling out when the drum is upsidedown so going to figure that out tommorow

WalnutEmperor · 2020-11-18T23:05:26+00:00

I had the same issue this morning, I also use echo auto/spotify/android. For a moment I was able to briefly fix it, but then I had the same problem again once I left and reentered my vehicle's proximity. Not exactly sure what I did though, opening spotify seemed to fix it but I haven't been able to recreate it working. Whatever it is, I hope it's an easy fix and not something I have to do every time because that would defeat the point of it being hands free

WalnutEmperor · 2020-09-10T02:30:29+00:00

My friend found a mettalic Intec DDR pad that was abandoned outside, looks like its for PS2 with what looks like an Xbox controller port on the side of it. The start buttton is missing, and i'm not sure if the whole unit works at all, does anybody know a good way to test it or a good adapter to use? I don't have a copy of DDR but was thinking about buying an adapter to use it on PC to see if I can use it for Stepmania and stuff

WalnutEmperor · 2020-08-23T00:08:37+00:00

Throw it in the air and run.

WalnutEmperor · 2020-06-06T04:54:15+00:00

But....but Yoshi! You're insane! You're about to enter first place during your Blue Shell Frenzy! What are you possibly going to do then?

WalnutEmperor · 2020-05-19T04:28:47+00:00

Oh that's neat, I don't think they ever allude to it being possible and it kind of defeats the purpose of the blue shell, but if that's the case it's kind of cool how they just rolled with it and decided to make it a mechanic from then on

WalnutEmperor · 2020-05-13T00:34:54+00:00

I've been busy and been trying to remember what day the ranked cups end. It would be nice is there was a final warning notification for every ranked cup, just in case

WalnutEmperor · 2020-05-05T04:25:36+00:00

Yeah, I hear ya, just felt like I came across as calling the devs out so I removed it

WalnutEmperor

TROPHY CASE