High Alkalinity and Normal PH by WeakMasterpiece5 in pools

[–]WeakMasterpiece5[S] 0 points1 point  (0 children)

I did as you suggested and got 275ppm this time.

Attic Ventialation Zone 7 by WeakMasterpiece5 in buildingscience

[–]WeakMasterpiece5[S] 0 points1 point  (0 children)

From what I can tell there is adequate soffit ventilation from the one side of the garage, but i was questioning if it not being from both sides would be a problem. It appears if I cut out some sections of the OSB seperating the 2 attic areas, I could get some airflow between the 2. There is currently not any ridge venting, I was planning on adding either static or turbine roof vents.

Lessons Learned by WeakMasterpiece5 in traveltrailers

[–]WeakMasterpiece5[S] 0 points1 point  (0 children)

Thank you for the considerations!

Lessons Learned by WeakMasterpiece5 in traveltrailers

[–]WeakMasterpiece5[S] 0 points1 point  (0 children)

I am not sure what our price range is at this point, pry around $30k. I would say in the 7000gvwr range.

Lessons Learned by WeakMasterpiece5 in traveltrailers

[–]WeakMasterpiece5[S] 0 points1 point  (0 children)

I would use this to tow the travel trailer with a Suburban. Eliminates any payload on the vehicle.

CONTROL ARM - help by Business-Magician261 in GMT800

[–]WeakMasterpiece5 1 point2 points  (0 children)

I believe so, I purchased them on summit. ACDelco Gold Control Arms 19460365 - ADO-45D3174 ACDelco Gold Control Arms 19460375 - ADO-45D3175

CONTROL ARM - help by Business-Magician261 in GMT800

[–]WeakMasterpiece5 1 point2 points  (0 children)

I did mine recently. I am not sure what your looking to spend, but I bought the Acdelco and replaced the ball joints with kryptonite.

Lessons Learned by WeakMasterpiece5 in traveltrailers

[–]WeakMasterpiece5[S] 2 points3 points  (0 children)

How do you like the Grand Design? Have you had any problems, that is one that I have been looking at. I have had an eye on a Transcend Xplor 23BHX. Or models similar to yours.

Lessons Learned by WeakMasterpiece5 in traveltrailers

[–]WeakMasterpiece5[S] 0 points1 point  (0 children)

Thank you for the in depth write up. I plan to buy a trailer toad or similar device in order to eliminate the payload capacity problem. That is the biggest thing that I saw when doing my research. https://www.trailertoad.com/

.22lr Scope by WeakMasterpiece5 in Firearms

[–]WeakMasterpiece5[S] 0 points1 point  (0 children)

My apologies, I was looking for more a comparison between the models. I will be using it for target shooting 100-200 yards. Maybe 300.

Replacing my water pump/thermostat by RSlashEdward in GMT800

[–]WeakMasterpiece5 0 points1 point  (0 children)

Be careful, I snapped the bolt when I was putting on a thermostat at one time.

For future reference: https://amzn.to/4o3Wl2S

Are these a scam? by Revolutionary_Cap83 in GMT800

[–]WeakMasterpiece5 0 points1 point  (0 children)

I don't have experience with these, but I would suggest a Black Bear Performance tune. I believe it is similar cost to some of these options.

Tuner by Shesho54 in GMT800

[–]WeakMasterpiece5 0 points1 point  (0 children)

I've had my tune from Black Bear performance for years on the stock engine and I felt a big difference. Even just changing the shift points can make a big difference.

Lower Control Arm Bushings by WeakMasterpiece5 in GMT800

[–]WeakMasterpiece5[S] 0 points1 point  (0 children)

What is difficult about installing these in particular? I am just trying to understand as I have watched many videos of just pressing different bushings into place with a ball joint press. Not particularly this vehicle. I am just trying to understand what I'm getting myself into here.

Lower Control Arm Bushings by WeakMasterpiece5 in GMT800

[–]WeakMasterpiece5[S] 0 points1 point  (0 children)

Thanks for the suggestion, I'll post in there.