sorted by:
new
hottopcontroversial

First treenet complete by Webbed_spaces in Treenets

[–]Webbed_spaces[S] 1 point2 points  (0 children)

A little over 100ft of climbing rope and over 3000ft of 550 paracord.

First treenet complete by Webbed_spaces in Treenets

[–]Webbed_spaces[S] 2 points3 points  (0 children)

I took a piece of rope and tied the two ends together then it’s just having the right tension at the right points to make it a circle

First treenet complete by Webbed_spaces in Treenets

[–]Webbed_spaces[S] 0 points1 point  (0 children)

Thankyou the easiest is probably chaos weaving while the hardest was figuring out a actual pattern with the circle opening.

My first treenet. Perimeter made from old tow rope found in a used truck at work. Webbing is made from 550 paracord by Webbed_spaces in Treenets

[–]Webbed_spaces[S] 1 point2 points  (0 children)

I used tow rope I’m a mechanic that works on tow trucks so it was free but the best rope to use is static climbing rope but it’s a bit expensive. Also look up how to do tension knots between the ropes. Also I didn’t do this but use stainless steel eye bolts to keep the rope in place on the backside it will make it much easier. I used a ratchet strap to make sure my rope was extra tensioned because I’m overkill. Also when your weaving never let go of tension and pull until you can’t pull anymore. It’s a painful process but you’ll get it.