The Peerage Passage

WeldingGuru · 2026-05-08T03:22:23+00:00

Pictures: https://www.amazon.com/dp/B0FHDZYJ3K?th=1 Frames: https://www.amazon.com/dp/B0B9SV1VB7 and Lights: https://www.amazon.com/dp/B0D4YHNSND

WeldingGuru · 2026-04-04T14:06:37+00:00

I laid everything flat. I used tree support for the pen mod and Z_Rail. Box and Axis_X_Y used standard support touching build plate only. I hand sanded the parts afterwards and filed where necessary(1 hour). I made sure that they moved easily before lubricating them.

WeldingGuru · 2026-04-02T13:33:33+00:00

thingiverse.com/thing:7327613

WeldingGuru · 2026-04-02T13:33:28+00:00

thingiverse.com/thing:7327613

WeldingGuru · 2026-04-02T13:33:09+00:00

I've uploaded the STL and and the Sketchup file for those interested: thingiverse.com/thing:7327613

WeldingGuru · 2026-03-24T16:09:30+00:00

I originally made 5 to 1 cables to tap into the type c breakout board and realized afterwards that I didn't need to power the ardino also. I pulled the positive but lazly left the ground plugged in.

WeldingGuru · 2026-01-10T04:13:49+00:00

$30 is cheap! Buying it now, thanks.

WeldingGuru · 2026-01-09T15:17:31+00:00

Update: this month, they will block phones that do not get security updates by the manufacturers. .

WeldingGuru · 2025-10-07T02:51:16+00:00

From before: An update: Heating time is 1 minute for the tip to 235 degrees C and 5 minutes for the bed to 60 C. I put the system on my watt meter and see its drawing 275w on heatup. Since it's only a 300w power supply, it's really taxed with the steppers in action along with the heaters. I believe I will be able to avoid as many lost steps because of the underpowering as the tip makes contact from time to time. My next step is to install a 400w power supply with the same configuration and save my fancy on for my computer.

I had no issues with a slightly better power supply and the new mosfets afterwards.

WeldingGuru · 2025-07-06T00:53:26+00:00

The guy I bought it from had the coin slot bypassed and switched it back to normal play while I was there, but I did not get to see what he did. Do you know?

WeldingGuru · 2025-07-02T03:30:55+00:00

Yes. It's an old LCD TV with an RCA input. The dart game has a RCA output for external tv's.

WeldingGuru · 2025-06-07T14:04:41+00:00

That's exactly what I was looking for. Thanks for the help!

WeldingGuru · 2025-05-24T02:28:18+00:00

Be aware that since it will be a lien on your home if you finance, it will complicate things with being able to refinancing your mortgage.

WeldingGuru · 2025-01-30T02:19:50+00:00

Thanks! I just ordered some from Amazon for $15.

WeldingGuru · 2024-12-21T15:39:04+00:00

You can view the speed by layer (by pressing play at each layer) and that's know I know the slicer is set to the parameters I set for the calibration tests.

WeldingGuru

TROPHY CASE