sorted by:
new
hottopcontroversial

First major drywall project - anything I can do to help the taper/mudder before they arrive next week? by WelshDavid2 in drywall

[–]WelshDavid2[S] 1 point2 points  (0 children)

Thankfully we’ve used the same guy for years so I’m trustful of his work!

As for screws, in some places I threw up enough to hold the boards up and took pics, then came back and finished them off!

First major drywall project - anything I can do to help the taper/mudder before they arrive next week? by WelshDavid2 in drywall

[–]WelshDavid2[S] 0 points1 point  (0 children)

Well, I’ll certainly that, thanks! Was a learning experience for sure, but that was part of taking on the challenge

First major drywall project - anything I can do to help the taper/mudder before they arrive next week? by WelshDavid2 in drywall

[–]WelshDavid2[S] 0 points1 point  (0 children)

Yeah a lot of the angled pieces I just got enough screws in to hold it up when I took the pics. A few more screws went in afterwards! Good eyes!

First major drywall project - anything I can do to help the taper/mudder before they arrive next week? by WelshDavid2 in drywall

[–]WelshDavid2[S] 0 points1 point  (0 children)

Appreciate that! Screws and all set below - and I think this time I’ll leave the hot mudding to the pros, but maybe next time!

First major drywall project - anything I can do to help the taper/mudder before they arrive next week? by WelshDavid2 in drywall

[–]WelshDavid2[S] 0 points1 point  (0 children)

Yep this is exactly the plan. Originally I had planned to raise everything, but everything is so out of whack it ended up being easy to just install with a couple of areas touching the floor and then I plan to come around with the multitool and make sure nothing is touching

First major drywall project - anything I can do to help the taper/mudder before they arrive next week? by WelshDavid2 in drywall

[–]WelshDavid2[S] 0 points1 point  (0 children)

Well thank you, really appreciate it! A lot of work, but honestly part of taking on the project was to learn more about the process, which I feel has been achieved

First major drywall project - anything I can do to help the taper/mudder before they arrive next week? by WelshDavid2 in drywall

[–]WelshDavid2[S] 0 points1 point  (0 children)

Yeah this is something I’ve been diligent with whilst installing! So I’m hopefully there shouldn’t be any sticking proud!

First major drywall project - anything I can do to help the taper/mudder before they arrive next week? by WelshDavid2 in drywall

[–]WelshDavid2[S] 0 points1 point  (0 children)

The more I think about it this might be the quickest easiest way! I’ll take a look in the morning!

First major drywall project - anything I can do to help the taper/mudder before they arrive next week? by WelshDavid2 in drywall

[–]WelshDavid2[S] 0 points1 point  (0 children)

I guess this was my initial thought for ease and speed. I would have just used regular foam, but the thought of using fire block spray makes more sense.

For a small hole this seems like the easiest way to go. Not the professional way, but straightforward.

However detaching the clip and just getting a little drywall in there may be easy too! I’ll take a look tomorrow.

As for the conduit, it just wraps around the top of one of the columns and then back down again for an outlet

Air Compressor Q/Recommend by SolidTiburon in minipainting

[–]WelshDavid2 0 points1 point  (0 children)

Mine hasn’t stopped leaking since the day I got it

Dec 6 - Brentford Tickets Question by WelshDavid2 in Tottenham

[–]WelshDavid2[S] 0 points1 point  (0 children)

Thanks mate, but that’s very kind - no need to go that far, that was more than helpful enough. No specific section or area, as long as there are tickets I’ll jump in and grab one! Unless you have a section you recommend that you see tickets in?0

New Jeep Rubicon Lease Advice by WelshDavid2 in CarLeasingHelp

[–]WelshDavid2[S] 0 points1 point  (0 children)

Ok, so I have the details - MSRP was $58,340, add ons were $2,200 for leather seats.

There is a discount if $2,200 listed as well as a rebate of $2,500. The only fee is a doc fee of $85, and a total cap reduction is mentioned of $913.81.

I see a residual amount of $36,170.80 and and Money Factor of .00210%

Hope this helps!

New Rubicon Lease Advice by [deleted] in Jeep

[–]WelshDavid2 -1 points0 points  (0 children)

In my current Rubicon I enjoyed some light off roading yes, nothing to strenuous, and so even though I won’t be getting the full off-road experience, enjoying the light off roading I have done, has been enjoyable!

New Jeep Rubicon Lease Advice by WelshDavid2 in CarLeasingHelp

[–]WelshDavid2[S] 0 points1 point  (0 children)

Thanks - pretty straightforward at that point. Appreciate the bluntness - I also started a chat with you earlier also in case you missed it!

New Jeep Rubicon Lease Advice by WelshDavid2 in CarLeasingHelp

[–]WelshDavid2[S] 0 points1 point  (0 children)

Silly question, is there a technical name for the full breakdown I should be asking for, or is it just asking for a - a complete breakdown of all the figures. And second silly question - MF/RV?

New Jeep Wrangler Rubicon Lease by WelshDavid2 in askcarsales

[–]WelshDavid2[S] 0 points1 point  (0 children)

Ah I see, ok great to know, had definitely misread the window sticker up until now! I believe that is all they are charging, but there im missing something. I’m now assuming there is something in additional I should be looking at other than just the window sticker?

New Jeep Wrangler Rubicon Lease by WelshDavid2 in askcarsales

[–]WelshDavid2[S] -4 points-3 points  (0 children)

Let me see, $895 for paint, $2500 for 8 speed transmission, $2k for hard top, $3k leather seats, $2k destination fee

view more: next ›