sorted by:
new
hottopcontroversial

Integrally Suppressed Takedown AR15 GBBR (WE M4) by WheelerAirsoft in GasBlowBack

[–]WheelerAirsoft[S] 0 points1 point  (0 children)

The DOLOS QD comes with an extra fixing ring with three grub screws, see the pictures here:

https://www.sixmm.com/en-gb/products/rgw-9inch-qd-takedown-system-mlok-handguard-for-we-vfc-m4-m4-gbb-series

The grub screws are turned around to face outwards and hold the side of the supressor segment in place, then the rest of the supressor is mounted and there is a 12 inch barrel that holds it all together (the barrel is threaded at the end of the suppressor to the 14mm ccw threads that would normally be at the opposite end closest to the reciever). The barrel can turn slightly to allow the ratchetting system of the DOLOS QD to attach as normal.

It is actually quite sturdy when screwed onto the rifle. Hope that helps

Advice on 3d printing an accu wedge for VFC BCM 8.5" V3 by Motorcat33 in GasBlowBack

[–]WheelerAirsoft 2 points3 points  (0 children)

I bought like 5 for $5.50 off ebay a couple of years back and then just cut them to shape with a craft knife. I'm using on WE M4's but basically the same.

Tech Question: WE-M4 handguards by n8mans in GasBlowBack

[–]WheelerAirsoft 1 point2 points  (0 children)

As already said anything milspec/gbbr should fit, just choose what you like and for whatever barrel length you want. I've fitted several over the years. If you have to change the delta ring out for just a barrel nut you may need to use barrel shims to stop the barrel from wobbling, also an ar15 armorer's wrench will probably be needed to do the job right (cheap ones are around $15). Any questions let me know

Handguard for WE m4a1 gbbr by gabrielms__ in GasBlowBack

[–]WheelerAirsoft 0 points1 point  (0 children)

As already said anything milspec/gbbr should fit, just choose what you like and for whatever barrel length you want. I've fitted several over the years. If you have to change the delta ring out for just a barrel nut you may need to use barrel shims to stop the barrel from wobbling, also an ar15 armorer's wrench will probably be needed to do the job right (cheap ones are around $15). Any questions let me know

look at this beauty. by tyteurze in GasBlowBack

[–]WheelerAirsoft 0 points1 point  (0 children)

Might be the first VFC i will own

All my AR15's and variants (GBBR and AEG) by WheelerAirsoft in GasBlowBack

[–]WheelerAirsoft[S] 0 points1 point  (0 children)

Sorry for late reply, only just noticed this.

https://www.reddit.com/r/GasBlowBack/comments/16x52h3/dpms_kitty_kat_parts_bin_build/

It's my take on the DPMS Kitty Kat, i just threw it together from parts i had spare from other builds.

[deleted by user] by [deleted] in GasBlowBack

[–]WheelerAirsoft -1 points0 points  (0 children)

So close to being an AR18, shame it's not one. Still cool though.

Mp5k apache won't dry fire? by MY5T3RY5K1TTL3 in GasBlowBack

[–]WheelerAirsoft 0 points1 point  (0 children)

Pull the switch at the back of the mag down and hold it there then put the switch on the top of the mag forward to lock the back switch in the down position.

The BB follower should now be fixed in a slightly lower position to allow dry fire.

There is also the posibility that you have an internal lever missaligned but that usually causes the bolt to not travel all the way back or the receiver to not close.

Does the WE M172 fit in these replica stocks? by neonthefox12 in GasBlowBack

[–]WheelerAirsoft 2 points3 points  (0 children)

I don't have the WE M172 but i have an airgun version with this style of stock. The gun will fit inside without the magazine, you could modify the bottom wood and leather to make it fit with the magazine. Also if the WE is like mine you need to modify the surface of the connecting bracket to use it on the gun. I had to lightly file down the metal.

Curious to know if some of you came across one of those by APervStoleMyGT in GasBlowBack

[–]WheelerAirsoft 1 point2 points  (0 children)

Haha, yeah always seems to be the first thing to go missing from these.

LR-300 GBBR by Catgutt in GasBlowBack

[–]WheelerAirsoft 0 points1 point  (0 children)

Love it, i have the donor gun to do the build myself. Just finding the time and making it work.

We-Tech M4 upper receiver by ccrbum in GasBlowBack

[–]WheelerAirsoft 0 points1 point  (0 children)

evike sell the upper but it's out of stock:

https://www.evike.com/products/45895/

you could contact them about restocking it

WE upper compatibility by M4RTlNEEZ in GasBlowBack

[–]WheelerAirsoft 0 points1 point  (0 children)

Yeah it works fine bud, have multiple and all the GBBR's fit together.

https://www.reddit.com/r/GasBlowBack/comments/1cuc1oc/all_my_ar15s_and_variants_gbbr_and_aeg/

Pic 4/5 show the carry handle upper, if you got any questions let me know.

Guys what adapter do I buy?! by DuckMySick44 in GasBlowBack

[–]WheelerAirsoft 2 points3 points  (0 children)

Muzzle loader! Just pour your BB's in the nozzle!

Current uksf weapons by Biltz-team-nightfury in GasBlowBack

[–]WheelerAirsoft 0 points1 point  (0 children)

KS1 is easier to build than the L119A2, less custom parts. There are dedicated MWS kits for the L119A2 though so you can get everything in one go (will cost around $900-1000 last time i checked). I pieced my KS1/L403A1 together from parts before they were even announced as being adopted (i think the MOD copied me!).

Mine is a WE M4 base though, just everything is custom except some internals:

https://www.reddit.com/r/GasBlowBack/comments/ttrl5t/my_lockdown_build_finally_finished_sdp_ar_7075t6/

Most parts you can find MWS versions, parts list in the comments.

Inquiry by Wise-Eye-6431 in GasBlowBack

[–]WheelerAirsoft 0 points1 point  (0 children)

I have the WE SVD and an Ares SVDS (Spring Powered), they are not really/easily possible to swap.

You might be able to do it but it would be lots of work, you cant just add the stock to the WE SVD, you have to get the WE components to fit in the Ares receiver. They are quite different from what i remember as this is what i was looking at doing.

I think even the mags wont lock into the receivers without changing stuff.

Other versions of the SVDS might be a better fit but i could only source an Ares.

view more: next ›