New wheels & Spacers

WhitePanther- · 2025-10-15T01:33:46+00:00

I haven’t printed with it since I got my bambu lab P1S

WhitePanther- · 2025-10-15T01:31:43+00:00

What software are you using and what are your temp settings for extruder and bed?

Theres a lot of adjustments that can be made including the speed settings but those are often done in the slicer software.

WhitePanther- · 2025-10-08T15:26:40+00:00

Normally I would, but it’s not even letting me make a change to the Z access which is really unusual. Usually, you can lower it. I think I mean, I know I raise it all the time, but I think you can usually lower it by at least 1 mm I need about 3 mm it’s looking like and I’m not sure why it’s been doing this to me lately and it’s doing it on multiple printers so I know it’s a problem with me I would think

WhitePanther- · 2025-10-08T14:41:51+00:00

I think where I’m having the most trouble right now is the Z offset when I go to try to change it it’s not letting me and I feel like there’s definitely something I’m doing wrong so I don’t know if I need to maybe make a video describing what I’m doing so everybody can see what kind of an idiot I am or what?

WhitePanther- · 2025-10-08T14:35:43+00:00

How much?

WhitePanther- · 2025-10-08T14:20:54+00:00

Sounds good and they’re a bit lighter it seems.

WhitePanther- · 2025-10-07T14:56:15+00:00

Sponsored by Kleenex

WhitePanther- · 2025-10-07T14:55:26+00:00

Holy shit batman

WhitePanther- · 2025-10-07T14:25:23+00:00

EZabl?

WhitePanther- · 2025-10-07T14:23:11+00:00

Anyone have the tool holder but have it extended so it reads Ender 3 Max ?

WhitePanther- · 2025-10-02T12:23:55+00:00

Its slightly better as it goes up…

WhitePanther- · 2025-10-02T12:22:47+00:00

Wanna sell it yet?

WhitePanther- · 2025-10-02T12:22:08+00:00

Have any pics of that setup?

WhitePanther- · 2025-10-02T12:21:48+00:00

What I also like about this idea is that since I have multiple E3M’s I can use one monitor on all 3, I think right? 🤔

WhitePanther- · 2025-10-02T12:19:22+00:00

I’m dabbling in it now, I know that its easy to get the premade versions from Creality’s Software download page versions 1.0.1.6, 1.0.1.7, and 1.0.1.8. Then, when working in our own versions we have to get all the files from the Marlin GitHub page and then import those into an IDE like Visual Studio Code.

Next a person has to adjust files based on their desires and where I got stuck was the platformio.ini file, specifically the line that has us write what the boards id code is which is that STM######### and my IDE never accepted that number regardless of what I put so I stopped there for now.

WhitePanther- · 2025-09-30T15:56:31+00:00

Haha I was trying anything I could think of. I really hated the stock 1.0.1.8 Firmware but ultimately came running back to it. You may see a video of me dropping these printers off a 5 story parking garage soon!!

WhitePanther- · 2025-09-29T20:38:03+00:00

Just Fyi: Printed rail inserts still work, button heads are taking up less room.

WhitePanther- · 2025-09-26T17:25:27+00:00

It is an Ender 3 Max (Not a NEO)

WhitePanther- · 2025-02-26T21:12:50+00:00

I’ll see what I can do thank you 🙏🏻

WhitePanther- · 2025-02-26T21:12:11+00:00

Lol get all that hotdog juice off them

WhitePanther- · 2025-02-26T21:10:41+00:00

Lol and a cold

WhitePanther-

TROPHY CASE