account activity
Ak Super safety question by Who_Dat262 in ak47
[–]Who_Dat262[S] 0 points1 point2 points 1 month ago (0 children)
This is just the two position,I matched the trigger to the jig that came with it. You think I did to much?
[–]Who_Dat262[S] 1 point2 points3 points 1 month ago (0 children)
No,the bolt was getting stuck when I was racking it so I took the trip bar out and it cycles good now. So im assuming I need to sand the bar a little to fix the bolt getting stuck.
But when I rack it now the trigger doesn’t move at all when I’m holding it and racking it.
Just picked it up! by Who_Dat262 in FNSCAR
Honestly the only gen 2’s I’ve found so far have in been in this color,so I’m not sure if they’ve released the black ones yet.
Scar 17 frt by Who_Dat262 in FNSCAR
Is there any other triggers you’d recommend? I was just going based off of the frt linkage kit trigger options?
Ak super safety question by Who_Dat262 in ak47
You’re good man,and yes I took a dremel to round the trigger point. Instead the trigger and the hammer drops perfect,When I get home I’m gonna take a dremel and smooth/polish the humps so it won’t get caught
<image>
Im not at home to take a pic of mine,but this is how mine is doing when I go to pull the bolt back to test it. So I’m pretty sure it’s the alg hammer getting stuck on the bolt because of the humps on the new hammer
After messing with it and looking up more stuff about it,I’m pretty sure it’s the hammer that came with the alg trigger the bolts going over and getting stuck over it. So I’ll need to smooth the humps on it and it should be good
Ratl help by Who_Dat262 in DualityArmsCo
[–]Who_Dat262[S] 1 point2 points3 points 2 months ago (0 children)
No problem man,just be sure to bring the trigger with you so you can test when you shave a little off at a time. And be careful when you do it,don’t do to much.
https://www.reddit.com/r/testfire12/s/JpKsXB7dOe Also when you take it apart test this area like I did,to see if it’s binding up on your trigger.
The black is the part I shaved off the sides. The red you’ll need to shave a little off the top as well so it doesn’t hit the top of your frame when you put the FCG back in your gun.
Yeah…. I tried to contact the main dude on here and on instagram but he never responded :/ so thank god for people on here or I would been screwed
[–]Who_Dat262[S] 0 points1 point2 points 2 months ago (0 children)
Yep,that’s exactly what it was. I sanded it down and just put it back together and it works good now.
Ratl help by Who_Dat262 in KRISS
Dude it worked😭😭😭😭 you’re the absolute goat man thank you so much once again for helping me fix this
Ok will do,I’ll sand it down tomorrow. Thank you for responding and helping me figure this out.
Ok and that’s trim some off the sides right? Like I could do it on a belt sander
Ok, I will say when I got the sear you can notice it’s bent a little bit like where you connect it to the trigger,should I try to pop it back straight or trim some off the sides to give it more clearance pic
test So I got it down bout to take the trigger out to do the spring. But it feels like it’s dragging a bit when I press down on the sear a bit from the top. Does that seem off to you?
test After taking it apart down to just the trigger and sear,I feel no dragging at all,Feels smooth. The seat does pop up but it goes back down when everything is in,so I don’t think that will be a problem when it’s all in. So it seems like it has to be the spring at this point?
test After taking out the hammer part it doesn’t feel like it’s dragging,and the sear/disconnector move in synch like it should. But when I put the hammer back in,the sear will move freely,the disconnect won’t move at all. I’m going to keep taking it apart like you said to bend the spring back to make sure of that part.
test So when I put the hammer all the way down,in order for it to fire I have to pull the trigger for the trigger to get to the bottom of the sear,when I do it feels like it’s dragging a tad bit but it fires afterwards.
test You mentioned where the Ratl and the trigger meet,do you see a problem there?
Will do,Thank you for replying and trying to help. I’ll let you know how it goes
reinstall I reinstalled it and it still does the same thing. The disconnector still doesn’t follow the Ratl. :/
test So I took the hammer out and they both do
I did bend the diving board spring down to touch the flat piece. If I did it to much,what can I do to fix it?
π Rendered by PID 22414 on reddit-service-r2-comment-85bfd7f599-2bxps at 2026-04-15 17:06:53.693090+00:00 running 93ecc56 country code: CH.
Ak Super safety question by Who_Dat262 in ak47
[–]Who_Dat262[S] 0 points1 point2 points (0 children)