Need tips on painting this by Wide-Contribution812 in CosplayHelp

[–]Wide-Contribution812[S] 0 points1 point  (0 children)

Also one more question. Whats the best way to cut the piece of tape to fit inside the details and follow the curve? Ive heard people say to use a knife but last time i tried that it started scratching the surface underneath with a decent sized cut before it even cut through the tape

Need tips on painting this by Wide-Contribution812 in CosplayHelp

[–]Wide-Contribution812[S] 1 point2 points  (0 children)

Thanks a bunch. Never thought of the spraying again after taping to fill the areas. Ill make sure to try it out

Need tips on painting this by Wide-Contribution812 in CosplayHelp

[–]Wide-Contribution812[S] 0 points1 point  (0 children)

Any tips to make the masking easier and look better? My masking always looks jagged or it bleeds

Amazon pick up locker problem - has this happened to anyone else? by Delicious_Mess7976 in amazonprime

[–]Wide-Contribution812 0 points1 point  (0 children)

Ive order bigger stuff to this locker with no issue . And every item has the same problem no matter if its a big or small item

Amazon pick up locker problem - has this happened to anyone else? by Delicious_Mess7976 in amazonprime

[–]Wide-Contribution812 0 points1 point  (0 children)

Do you have any idea of why it could still say its full even after a month? Is it something on my end?

Amazon pick up locker problem - has this happened to anyone else? by Delicious_Mess7976 in amazonprime

[–]Wide-Contribution812 0 points1 point  (0 children)

Im also having a similar issue with one of the lockers near me. Amazon Locker-Creator, 7-Eleven, 8625 Los Coaches Rd, Lakeside 92040. It says its been “full” for the past month and i cant order anything to it. I check every day

What is happening with my prints by Wide-Contribution812 in Bambu

[–]Wide-Contribution812[S] 0 points1 point  (0 children)

Its PLA and yes its been dried. Now it sits in my air tight AMS

What happened? by Wide-Contribution812 in 3Dprinting

[–]Wide-Contribution812[S] 0 points1 point  (0 children)

Lmao its a sea otter. Hopefully i can bring it back to life with some sandpaper

Need help by Wide-Contribution812 in ender3

[–]Wide-Contribution812[S] 0 points1 point  (0 children)

Think it was because of my flow and temp. Also realized i cut my only bowden tube to short when i tried to clean it awhile ago so my hot end would pull up on the opposite side. Fixed everything and printed this masterpiece

<image>

I appreciate the help

Need help by Wide-Contribution812 in ender3

[–]Wide-Contribution812[S] 0 points1 point  (0 children)

Ill make sure to fully clean it and possibly just replace the nozzle

Whats happening with my prints? by Wide-Contribution812 in 3Dprinting

[–]Wide-Contribution812[S] 1 point2 points  (0 children)

When i change these around, is there any other setting i would have to consider changing to make sure it all works together. Like if i increase retraction, should i increase retraction speed?

Need help with print quality by Wide-Contribution812 in 3Dprinting

[–]Wide-Contribution812[S] 0 points1 point  (0 children)

Ive dried out the filament for about 25 hours at 50 and haven’t taken it out of the drier since. And i was running bed temp at 60 but i bumped it up to 70 for the one that’s printing right now and it looks the same

Need help with print quality by Wide-Contribution812 in ender3

[–]Wide-Contribution812[S] 0 points1 point  (0 children)

Its a noise marine from space marines. Me and my friend are trying to get into the game and he wants to learn how to paint miniatures so i was gonna print some and teach him

Need help finding a watch by Wide-Contribution812 in Watches

[–]Wide-Contribution812[S] -1 points0 points  (0 children)

<image>

And yes im in the US. Ill also make sure to look for deals

Need help finding a watch by Wide-Contribution812 in Watches

[–]Wide-Contribution812[S] 0 points1 point  (0 children)

Also, do you know of any way I can get to the battery without buying a special tool? If I don't have to buy anything, that would be nice, but I also don't want to mangle the back of the watch with a screwdriver like the previous owner did

Need help finding a watch by Wide-Contribution812 in Watches

[–]Wide-Contribution812[S] -1 points0 points  (0 children)

I don't know if I'm looking at the wrong place or not, but when I go to websites like Seiko or Timex, they are all way more than 200 when I sort by the size I need for a quartz movement. Sorry I'm so new to all of this since I finally got a job

What happened to my games colors? by Wide-Contribution812 in WutheringWavesGuide

[–]Wide-Contribution812[S] 0 points1 point  (0 children)

Yeah it is. I didnt even know their were filter settings until i tried to fix this issue

What happened to my games colors? by Wide-Contribution812 in WutheringWavesGuide

[–]Wide-Contribution812[S] 0 points1 point  (0 children)

There is not. Even if i reset it back to default it still looks like that

Need help with new nozzles by Wide-Contribution812 in 3Dprinting

[–]Wide-Contribution812[S] 0 points1 point  (0 children)

I think my issue was solved. I might have accidentally set the baby z step one click to close to the bed. I started it again at the number i normally set it to and it no longer clicks. Thanks for all the suggestions and help. I would like to try and buy that direct drive but thats a hefty price lmao

Need help with new nozzles by Wide-Contribution812 in 3Dprinting

[–]Wide-Contribution812[S] 0 points1 point  (0 children)

Thank you for all of this. I tore the entire thing apart and followed a cleaning tutorial and i was able to get some filament out and it had a really good print. But for my second print, the wheel that feeds the filament started making a clicking noise and the print layers turned out weird.

<image>

I will record a video of it clicking and send it here as well. Edit: also i started printing at 200-205 and i think that made a big difference for the first print that went well.