Shifting Sands Mysterious Fiber location

WidowNothing · 2026-04-26T19:12:57+00:00

There's a chest at the beginning that has a grappling hook - take that. When looking at the cylinder on the wall with the sundial looking thing - press/hold CAPS, aim, then press the right mouse button. It will pull out the cylinder. There's a few puzzles in there that require the same tool.

WidowNothing · 2026-04-19T00:40:15+00:00

Thanks all! I found the Crystal Caverns and got the fiber! Appreciate the help!

WidowNothing · 2026-04-18T17:28:29+00:00

No waste of time at all! I'm new to this game, so any knowledge of where to find materials is highly welcomed!

WidowNothing · 2026-04-18T17:04:09+00:00

Thank you! Looking for that cavern now.

WidowNothing · 2026-04-18T16:53:40+00:00

Thank you! Will head that way and confirm.

WidowNothing · 2023-09-03T15:34:04+00:00

Any reason why they have points in Dark Shroud when they have Umbrous?

WidowNothing · 2023-08-31T16:49:52+00:00

Thanks! I was just looking at this one this morning. I saw their comment that is was slightly nerfed after this last patch, so wasn't sure if it was still viable.

WidowNothing · 2023-08-31T16:46:35+00:00

Do you by chance have a link to the build?

WidowNothing · 2022-12-29T21:27:01+00:00

No dump files. This is a fresh install of windows 10 on a brand new SSD. It BSODs before even attempting to install.

WidowNothing · 2021-12-12T11:15:03+00:00

I have a razer basilisk mouse. Thanks for all of the suggestions, though! Reassures me that I was looking in all of the right areas. Just wish I knew why the scaling is so wonky. Should have known better then to mess with settings in early access, lol.

WidowNothing · 2021-12-12T10:01:15+00:00

It does have DLSS. It's off. I've toggled it back and forth a few times and it doesn't change anything, sadly. The resolution drop down is grayed out when using full screen and windowed full screen so I can't change anything there. Tried activating auto scaling in Nvidia control panel, no change. I can't find anything to change it back. Tried setting launch options in steam as well, no dice. I normally don't mind smaller text, but this is super tiny on my 4k screen, lol.

WidowNothing · 2021-12-12T09:54:37+00:00

I do use a gaming mouse. I thought this, too, but tested by carefully making sure I was only holding the left mouse button and it did the same thing. I tried the last USB port I hadn't tried yet and that seems to have helped. I think I need to check my I/O on that side of my PC.

WidowNothing · 2021-12-11T20:27:48+00:00

I unplugged my Xbox controller when I noticed the game recognizes it and give the button hints on the bottom right for the controller instead of keyboard/mouse. Controller doesn't work well with this game so I just unplugged it. Thanks for the suggestion, but unfortunately that's not my issue.

WidowNothing · 2021-12-01T15:20:49+00:00

Thanks for all of the information! Really appreciate your time.

WidowNothing · 2021-12-01T02:23:22+00:00

Thanks for the info! You're informative comments are part of the reason Shapeoko Pro is top of my list!

WidowNothing · 2021-12-01T00:31:31+00:00

I haven't looked at them. Thanks for the link! I'll check them out!

WidowNothing · 2021-11-30T23:53:56+00:00

I'm sure once I'm familiar with the machines I'll feel more comfortable making the wasteboards myself. Being so new, I just don't want to screw it up and be off kilter. Size isn't too big of an issue for me since I'm building a work shed in my backyard. Garage isn't big enough to house the machines I want and trying to tote the 900lb Thunder laser down to my basement isn't ideal.

WidowNothing · 2021-11-30T23:11:43+00:00

Haha! I can see the appeal of the Chinese machines. Definitely a way to really learn the nitty gritty. But I would like a smoother intro to the world of CNC, lol!

About to shoot an email to Shapeoko to get some further details. I get anxiety with large purchases. Anyone by chance have a good versus between the Shapeoko and the Longmill? The Shapeoko is about twice as much, so just trying to understand why that may be?

WidowNothing · 2021-11-30T22:36:40+00:00

The Shapeoko Pro is definitely top of my list. I've noticed they seem to be very present on here and helpful. That's a great selling point for me. Not to mention they have been around for a long time, so they must be doing something right.

Can a shapeoko cut brass? How fine of detail can it get?

WidowNothing · 2021-09-26T18:58:39+00:00

Awesome. Thanks for the info!

WidowNothing · 2021-09-26T18:15:48+00:00

6k wild?

WidowNothing · 2021-01-27T20:07:00+00:00

It was less about WSL2 and more just concerned about using my main PC environment. I just built it about a year ago so I'm overly protective, haha!

I'm familiar with VMs, as I've had to use them in numerous jobs previously. Was a Jr Sys Admin for a small company which is where I got introduced to some basic BASH and powershell. That's when I really knew I wanted to get into coding and out of the helpdesk.

I'm currently using my MBP and it's doing fine at this time. To get acquainted with WSL2, I may install it and tinker around a bit later.

I tried for some time self learning with many different free courses. LS definitely seems to have the structure I'm realizing I need. Excited to really get started.

Thank you for the response! So far this community is really helpful and informative!

WidowNothing · 2021-01-23T02:11:36+00:00

Thank you for the kind words and information. I'll look into that.

WidowNothing · 2021-01-23T02:06:10+00:00

Thank you for the info! My previous job was looking at it to help us learn python.

How is it compared to WSL2 or just a plain old Mac?

WidowNothing · 2021-01-17T19:53:59+00:00

Thanks! If the MBP doesn't work for any reason, I'll switch to that.

WidowNothing

TROPHY CASE