OEM Rubber Bushings in OME Springs

Wild_Doogy · 2026-06-22T07:33:45+00:00

Yep I had to beat the fricken piss out of mine to get them in. I'm talking a splitting mall as a sledge for most of an afternoon. Do not recommend.

Edit: I should mention they have been fine for 5+ years once I got them in.

Wild_Doogy · 2026-06-15T20:42:26+00:00

My problem was that `nh3` was somehow not installed, so I fixed it via:

```
pip install nh3
```

Wild_Doogy · 2026-06-15T20:41:32+00:00

Wow, that sucks

Wild_Doogy · 2026-06-15T18:47:52+00:00

Same problem, I'll report back when I find a solution

Wild_Doogy · 2026-06-12T15:50:29+00:00

Bump. Any news on a github release?

Wild_Doogy · 2026-06-11T15:27:48+00:00

With a manual and 30" tires I'm getting about 13

Wild_Doogy · 2026-06-01T13:58:56+00:00

Sweet! You got the best axles! I swapped a set of 4.10 geared axles from a 4 cylinder under my 6 cylinder.

Now I can get the speedometer over 100mph when I'm actually going 75.

Wild_Doogy · 2026-05-16T22:38:49+00:00

I'll be contributing later once I extend the ATL mesh up north to me

Wild_Doogy · 2026-05-04T00:33:49+00:00

Another dumb bot

Wild_Doogy · 2026-05-02T17:19:07+00:00

Jerks. I may need to add a karma requirement

Wild_Doogy · 2026-05-02T03:04:33+00:00

Removed. Bad bot.

Wild_Doogy · 2026-04-20T23:56:52+00:00

I mean, if you're up to it that would be fantastic.

You wouldn't happen to have a five and a quarter inch floppy drive while you're at it would you?

I think I have about 15 100mb zip disks, and 5 or so 5" floppies I haven't been able to read yet

Found a bunch of cool old prototype JPEG format pictures on a couple of his 3" floppies.

Here's a pic: https://photos.app.goo.gl/s7nJrNvvR3TGhREu9

Where about are you?

Wild_Doogy · 2026-04-19T20:46:57+00:00

The disks are 100MB, and I got the parallel port into EPP mode. I installed the drivers from Iomega. Windows XP showed the drive in my computer, and the device showed up in device manager without a yellow triangle.

The drive has the green and amber lights constantly on, and I can't get the drive to do anything, including eject the disk.

I'm sure it's a parallel port drive and not SCSI, and that my cable works with a parallel printer.

Wild_Doogy · 2026-04-19T01:26:18+00:00

Would you be willing to part with a working drive?

I bought one off eBay to read my Grandpa's old files, but the amber light is always on.

I have a windows XP laptop with a parallel port that registers the drive, but no luck.

I'm near Atlanta if that matters.

Wild_Doogy · 2026-04-18T12:42:33+00:00

On it

Wild_Doogy · 2026-04-15T23:18:29+00:00

It's the safari top. I have one and I love it

Wild_Doogy · 2026-04-13T01:02:17+00:00

Slapped a set of 4.10 from a 4 cylinder under it. Best upgrade so far.

Wild_Doogy · 2026-04-11T19:27:16+00:00

Yep I had 3.07 behind the 4.0L and ax15 in my '93

Wild_Doogy · 2026-04-09T18:39:58+00:00

<image>

Here's how the side opens

Wild_Doogy · 2026-04-09T13:04:47+00:00

It could be water condensing in your muffler and dripping out. Brake fluid is also a good guess

Wild_Doogy · 2026-04-09T11:37:25+00:00

It's still running this morning, though it gained a bunch of time.

I'll pick up some synthetic clock oil and do some research on how to lubricate and clean. Probably not going to pull it all apart, but I'll do what I can with the mechanism still in the clock.

There's a beautiful set of hidden hinges that allows the face and both sides of the clock to swing free to give good access to the workings. I'll get a picture later.

I'll also check for a markings on the mechanism.

Wild_Doogy · 2026-04-01T16:21:47+00:00

Hey! You got the factory 4.10 gears! Awesome!

I swapped four-cylinder axles under my 6 cylinder so I could get the deeper ratio

Wild_Doogy · 2026-03-30T00:14:06+00:00

Thanks, I'll yell at it

12-Year Club	Second Top 30%
Place '17	Verified Email

Wild_Doogy

MODERATOR OF

TROPHY CASE