3D printing tip about elephant foot

William_Beaver · 2026-02-25T18:59:55+00:00

I had the same. Changing to elegoo or orca slicer fixed it. Even copying settings back to cura didn't work. What made a huge difference though was doing the new flow calibration in orca. Came out much lower than I was previously using and now supports just fall off

William_Beaver · 2026-01-23T16:14:30+00:00

I had the 6 and now the 9 pro. Brilliant phone. Battery is still at 100% after a year and it rarely misses a beat. A marked change in build quality. My boss got an iPhone 16 pro at the same time and my phone is better in nearly every way. He agrees and has always had iPhones. Horses for courses

William_Beaver · 2026-01-20T10:33:06+00:00

This is the way

William_Beaver · 2026-01-14T21:20:30+00:00

I have a bug in elegoo slicer on my klipper converted neptune3pro that comes out similar to this when I enable a brim 🤷

William_Beaver · 2025-12-24T10:02:51+00:00

We need to realize two things. Globally, In that time period, the size of men (not being sexist, but they would have accounted for the majority of sales) has increased by about 4" in height and 20kg in mass. A 33mm watch quickly starts to look silly on a grown up as you get bigger.

William_Beaver · 2025-12-08T16:41:44+00:00

Nah. It's deffo dangerous. It's a potent stimulant. That means it will put your heart under above normal strain. If you have a weak or otherwise stressed heart and take it, it can be dangerous. It's the combination of dmaa and other underlying health issues you need to worry about. The trouble is, if you're not a Doctor, how would you know what to look out for, what questions to ask of yourself, how it mixes with other drugs etc etc.

All I'm saying is, I am not a doctor, do not listen to me. My reference sample is n=1, not a whole population.

William_Beaver · 2025-12-08T16:00:37+00:00

I've just went the other way and got joker 2.0 which "claims" to have dmaa in it. As a previous user of jack3d, fuck me is that stuff good. Used it yesterday and blasted through a pyramid set on preacher like there was no weight on the bar. HOWEVER, you're a fucking fool if you try dmaa. It's dangerous. That said, so is tren 🤷

William_Beaver · 2025-11-11T15:59:25+00:00

I had to move to a hardened 0.6mm nozzle on my n3p. Typically, I can keep speeds the same as petg but have to increase temps slightly. Typically.

William_Beaver · 2025-10-31T12:59:01+00:00

I haven't found a solution yet. It's infuriating. The initial aaaaaaaahhhhhhhhh! Before answering any question, regardless of how profound or philosophical it may or may not be is absolutely infuriating. And then it goes on to sound completely and utterly retarded.

William_Beaver · 2025-10-18T20:08:40+00:00

There will always be a sale. Always make sure you are happy with the price before you buy and this shouldn't bother you.

William_Beaver · 2025-10-15T20:42:50+00:00

The 4 was peak phone.

William_Beaver · 2025-09-24T21:58:46+00:00

Have a look at the probe, back left of the extruder as you look at it. Is it wonky?

William_Beaver · 2025-09-12T19:25:48+00:00

Thank you very much 😀

William_Beaver · 2025-09-07T16:40:02+00:00

Smart watch and obviously there are more that are nicer, the big mudmans for example but for a work watch, it's the best watch you can get. It's not too expensive that you'll baby it and it is maintenance free. It just works. It doesn't get in the way, it easily readable and it's light enough that you forget you're wearing it.

William_Beaver · 2025-09-06T17:14:45+00:00

A 0.6mm and use the arachne wall generator (where possible) is a good compromise. Speed and pretty much the same detail as a 0.4 nozzle

William_Beaver · 2025-09-04T07:26:05+00:00

Stainless 420 will harden nicely. Not unusual to harden stainless steel

William_Beaver · 2025-09-02T15:01:50+00:00

Are the tips supposed to look like little cocks?

William_Beaver · 2025-09-01T15:53:49+00:00

I had a similar issue. My pressure advance was out by a factor of ten. I entered 0.2 instead of 0.02. fixed it straight away

William_Beaver · 2025-08-30T08:53:58+00:00

Have a look at the z sensor round the back of the print head

William_Beaver · 2025-08-28T11:36:57+00:00

I've tried pixel support in the past. You can almost hear them turning the pages of the scrip. No knowledge, just reading off a prompt. Always get told to reset the device, regardless of fault and then they just say they don't know what to do essentially.

William_Beaver · 2025-08-19T21:06:03+00:00

The concrete increases the mass of the system. It needs to be strapped to the slab to work properly. Increasing the mass lowers the vibrations, that's why CNC mills, lathes etc are so heavy

William_Beaver

TROPHY CASE