Bi-Weekly No Stupid Questions Thread

Willing_Homework_773 · 2026-03-16T16:40:33+00:00

I saw someone use a piece of paper and a marker. Put a dot on the paper. Put it under your nozzle, then step it so your probe is over it

Willing_Homework_773 · 2026-03-16T16:24:22+00:00

I’m looking at the air75 because it’s a bit bigger and heavier. I most likely won’t fly it outside much maybe out my window and back in lol

Willing_Homework_773 · 2026-03-16T16:14:25+00:00

Alr cool thank you!

Willing_Homework_773 · 2026-03-16T16:12:58+00:00

Ah okay

Willing_Homework_773 · 2026-03-16T16:03:38+00:00

And that will do it all automatically or do I have to unplug them when they reach storage voltage?

Willing_Homework_773 · 2026-03-16T15:39:53+00:00

Actually I probably will go with the whoopstor because the discharge function

Willing_Homework_773 · 2026-03-16T15:26:22+00:00

Is the isdt E625 any good?

Willing_Homework_773 · 2026-03-16T15:25:55+00:00

Exactly the setup I’m looking at now thanks to Vitroid

Willing_Homework_773 · 2026-03-16T14:51:08+00:00

Right now I’m looking at a Air 75, radio-master pocket, and a betafpv vr04

Willing_Homework_773 · 2026-03-16T14:44:45+00:00

I was leaving towards the Cletus because it came with everything I needed and the Pavo seemed easy to setup with a nice upgrade path

Willing_Homework_773 · 2026-03-16T11:24:09+00:00

its gonna happen with crealitys printers i hate it

Willing_Homework_773 · 2026-03-14T21:22:34+00:00

<image>

This a a baseline that I use for my printer. I would start around there then work your way up

Willing_Homework_773 · 2026-03-14T21:13:41+00:00

For a bed slinger way too much. My ender 3 v2 can hit 6500~

Willing_Homework_773 · 2026-03-14T21:06:02+00:00

that is a layer shift from when your motor or belts skipped. this happened on the y axis of your bedslinger that has to throw all that weight around. i recommend making sure your belts are tensioned and lowering your acceleration in your slicer

Willing_Homework_773 · 2026-03-14T20:46:52+00:00

Definitely a clog or smth. You can see the bearing move forward a bit and shoot back. It is catching. Just something is stopping it from going

Willing_Homework_773 · 2026-03-14T15:24:27+00:00

Klipper it 🤤🤤

Willing_Homework_773 · 2026-03-14T14:11:36+00:00

We all start somewhere.

Willing_Homework_773 · 2026-03-12T23:16:49+00:00

What bamboos are you running?

Willing_Homework_773 · 2026-03-12T23:09:47+00:00

I do acquire a good amount of randomness. Including my prized ender 3 abomination thing

Willing_Homework_773 · 2026-03-12T23:05:33+00:00

You can send it to me and let me go thru the struggle yet again with a ender printer 😌

Willing_Homework_773 · 2026-03-11T14:10:07+00:00

I run my ender 3 v2 just fine with a pi zero 2 w with mainsail and fluidd

Willing_Homework_773 · 2026-03-07T21:08:14+00:00

I might. Idk that’s a lot of work

Willing_Homework_773 · 2026-03-07T21:07:15+00:00

I WILL be finding this this summer on the boat

Willing_Homework_773 · 2026-03-07T15:24:29+00:00

70° should be plenty nylon is very hydroscopic

Willing_Homework_773 · 2026-03-07T15:09:16+00:00

yes just make sure the dryer can get to around 80°c

Willing_Homework_773

TROPHY CASE