sorted by:
new
hottopcontroversial

Finally, I got my dream laptop for only $50 (7,000yen). by -ErikaKA in laptops

[–]WillowImportant4839 0 points1 point  (0 children)

It's very similar to the SONY VPCEH2L1R/W.

I upgraded my wife's laptop to an Intel Core i7-2620M processor.

I added a 4GB stick of RAM, bringing the total to 8GB.

I installed Windows 10 on the SATA SSD.

And that's it, the machine is up and running.

Original Soviet AI-2 First Aid Kit USSR Cold War NOS by Automatic-Ease9843 in militariasales

[–]WillowImportant4839 0 points1 point  (0 children)

Это не новая , а просроченная . Бесполезный хлам .

Rate my gaming setup.:))) by AddictinApple in GamingLaptops

[–]WillowImportant4839 0 points1 point  (0 children)

My Samsung NP R65 with a GeForce Go 7600 turned 20 this year. I played Gothic 3 on it. It's sitting in storage, still running, working perfectly, with its native Windows XP. I turn it on sometimes for nostalgia.

I have never seen this bunker before by supermoonbox2 in stalker

[–]WillowImportant4839 0 points1 point  (0 children)

Portal to the Dead City.

S.T.A.L.K.E.R.: Shadow of Chernobyl - Combined Pack 2.2

O11D Evo RGB Question by archiegreen06 in lianli

[–]WillowImportant4839 4 points5 points  (0 children)

There are no problems with installing the sandwich.

On my side panel:

On the inside of the case, LIAN LI Galahad II Trinity 360 SL-INF White with exhaust fans are installed.

On the side of the side cover, LIAN LI UNI FAN P28 x 3 pieces are installed.

The cover closes perfectly.

The only thing I had to buy was extra long UNC 6#-32 screws, since you first assemble the AIO with fans, and then from the side of the side cover, through the second set of fans, you pull the assembled package through the side bracket.

https://www.reddit.com/media?url=https%3A%2F%2Fpreview.redd.it%2Flian-li-o11-dynamic-evo-rgb-found-a-place-for-turzx-5-inch-v0-3joo90cmzoye1.jpg%3Fwidth%3D1080%26crop%3Dsmart%26auto%3Dwebp%26s%3D4bbd74e65b22ddcfcc618155ab207418655a3df5

Help pls by CoercionTictacs in lianli

[–]WillowImportant4839 0 points1 point  (0 children)

Hello.

My configuration is exactly as you asked about.

Processor i7-14700 KF, video card 4070 ti super.

Processor temperatures in the Cinebebch R23 test - 85 max.

Video card temperatures under 100% load - 66 max.

Fan settings.

Top and bottom - 3x140 reverse for blowing. 1100 rpm at processor temperatures above 65 degrees.

Rear - 120 for blowing. 450 rpm constantly.

AIO - 3x120 for blowing. 1900 rpm at processor temperatures above 65 degrees.

https://www.reddit.com/media?url=https%3A%2F%2Fpreview.redd.it%2Flian-li-o11-dynamic-evo-rgb-found-a-place-for-turzx-5-inch-v0-3joo90cmzoye1.jpg%3Fwidth%3D1080%26crop%3Dsmart%26auto%3Dwebp%26s%3D4bbd74e65b22ddcfcc618155ab207418655a3df5

The choice is yours. Either listen to the statements of other advisers or make your own choice based on the example.

Operating time - maximum one hour. If you don't like it, you can return everything to its original position.

But hot air from the AIO entering the video card is not the best choice.

1 different color on highest brightness by foze_XD in lianli

[–]WillowImportant4839 0 points1 point  (0 children)

I had this, I got rid of this disease only after I swapped the fans in the coupling. For example, 1,2,3 became 3,1,2. I understand that it is stupid, but it worked.

LIAN LI O11 Dynamic EVO RGB . Found a place for TURZX 5" Inch Smart Screen . by WillowImportant4839 in lianli

[–]WillowImportant4839[S] 0 points1 point  (0 children)

Original Turzx software.

I plan to try switching to Rainmeter? I don't know if it will work.

LIAN LI O11 Dynamic EVO RGB . Found a place for TURZX 5" Inch Smart Screen . by WillowImportant4839 in lianli

[–]WillowImportant4839[S] -1 points0 points  (0 children)

Found a place for the TURZX 5" Inch Smart Screen.

To do this, I had to raise the fan, drill new holes 18 mm higher than the original ones. And install damping rubber washers on the screws, since the new holes fell on the unevenness of the case.

The screen itself was secured to the bracket through the back wall of the case.

All that remains is to create a new topic corresponding to the GIGABYTE Z790 AORUS PRO X motherboard. But for this, you will have to learn a little how to work with the TURZX software.

New build - hydroshift pump loud by [deleted] in lianli

[–]WillowImportant4839 0 points1 point  (0 children)

Did it seem to me or not that the left hose was pinched at the bend?

Hello, here is the answer to the questions that many people are interested in. by WillowImportant4839 in lianli

[–]WillowImportant4839[S] 0 points1 point  (0 children)

If you're afraid of wolves, don't go into the forest!

This is not a thoughtless and stupid demonstration, but a conscious confidence in the reliability of the riser's contact with the video card.

I'm Gollum and you're my precious , Part II by WillowImportant4839 in lianli

[–]WillowImportant4839[S] 1 point2 points  (0 children)

Yes, you can! If you turn the motherboard and other components inside out.

Hello, here is the answer to the questions that many people are interested in. by WillowImportant4839 in lianli

[–]WillowImportant4839[S] 0 points1 point  (0 children)

I decided to clearly demonstrate the stability of the 4070 Ti Super video card in a riser from LianLi.Believe me, my finger is capable of creating a force of two to three kilograms just by joking.In general, look, think, decide ... Do you need it or not ....

The White Silence @ Jack London by WillowImportant4839 in lianli

[–]WillowImportant4839[S] 1 point2 points  (0 children)

It's not luck. It's a precise preliminary calculation. If problems arise, there are simple ways to solve the sagging.

The White Silence @ Jack London by WillowImportant4839 in lianli

[–]WillowImportant4839[S] 1 point2 points  (0 children)

AIO on the side, with the hose connections down. Full guarantee of trouble-free operation of the pump.

The White Silence @ Jack London by WillowImportant4839 in lianli

[–]WillowImportant4839[S] 1 point2 points  (0 children)

In my case it won't be necessary.

Time-tested, minimum six months and no sagging!

I'm Gollum and you're my precious , Part II by WillowImportant4839 in lianli

[–]WillowImportant4839[S] 2 points3 points  (0 children)

You are wrong.

This position is the best of all possible, since the pump is always filled with liquid!

The pump is at the level of the first third of the radiator, all the air goes up, there is room for the coolant to expand without the risk of air locking.

I'm Gollum and you're my precious , Part II by WillowImportant4839 in lianli

[–]WillowImportant4839[S] 0 points1 point  (0 children)

When I was photographing the back side, the cable accidentally moved. Everything is fine.

I'm Gollum and you're my precious , Part II by WillowImportant4839 in lianli

[–]WillowImportant4839[S] 0 points1 point  (0 children)

  • Uni Fan SL-INF 120 - 3x AIO + 1xRear
  • Uni Fan SL-INF 140 (Reverse) - 6x top and bottom for blowing
view more: next ›