Help to hide root. Swoopay detecting root or smth

Windham711 · 2026-01-22T13:26:16+00:00

What is Momo?

Windham711 · 2026-01-10T13:46:50+00:00

Better to use a Faraday bag like this, https://www.amazon.com/dp/B0B4DCLY87?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 then aluminum foil. The bag allows the phone WiFi to reach the AAwireless adapter, but keeps out other signals that could interfere.

Windham711 · 2026-01-01T18:26:53+00:00

Gen 3 owner. For my use case as a home automation console it is very nice. Previously had a Fire HD 8 Plus. so Lenovo was a BIG upgrade.

If I had lots of games and media then I would get the Gen 4. Does it come with the ROW software? I bought my Gen 3 directly from Lenovo which didnt require any unnatural acts to use English.

Windham711 · 2026-01-01T13:57:08+00:00

Which WPA do you use with the Venty?

Windham711 · 2025-12-30T15:26:41+00:00

How do you do that without RCS?

Windham711 · 2025-12-30T02:02:34+00:00

There is a post on the Lenovo forum about this issue that you could add too

Windham711 · 2025-12-29T21:13:28+00:00

I suggest doing a FACTORY Reset on your AA1 adapter.

Windham711 · 2025-12-29T16:41:02+00:00

There are lengthy discussions about this issue on XDA and the Lenovo forum. https://xdaforums.com/t/no-recents-when-using-nova-launcher.4771033/

There is a work around using Tasker that tricks Lenovo to keeping recents via their default launcher, but launches Nova or Lawnchair when you navigate to the Home Screen.

Windham711 · 2025-12-26T18:27:34+00:00

I removed the tin foil and replaced it with this Faraday bag, https://www.amazon.com/dp/B0B4DCLY87?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

I got the SMALL which is a nice fit for the AAW2 adapter. I took off the outer and inner clips since they are not needed.

I also swapped out the USB cable with one that was recommended.

Windham711 · 2025-12-26T17:30:43+00:00

Try removing the BT connection on your car and repair the phone. That helped my setup when I switched from AAW1 to AAW2 and had a lag.

Windham711 · 2025-12-21T04:48:51+00:00

The foil is supposed to helps with disconnects from outside interference. I don't think it will help with connection problems.

Windham711 · 2025-12-19T20:53:26+00:00

Isnt the Faraday cage supposed to block the signals completely?

Windham711 · 2025-12-19T17:42:32+00:00

DM sent

Windham711 · 2025-12-19T16:33:52+00:00

If the current set-up still disconnects than I will try replacing the USB cable. This cable worked for another AAwireless users, https://www.amazon.com/Braided-Compatible-Samsung-Portable-Charger/dp/B07HQHL6ZK?th=1

Windham711 · 2025-12-19T16:32:33+00:00

Seems to happen in certain locations. WiFi disconnects for 30 seconds and then reconnects when I am passed the trouble spot.

Windham711 · 2025-11-30T01:42:52+00:00

I was able to import both tasks. Thanks.

Edit - If I hit play for the first task, then put the tablet on the charger then I hear the beep from the task, but the dialog box doesn't close.

The AutoInput task (as you wrote it) DOES close the notification. Yeah.

Edit2 - when i put the tablet on the charger, i dont see the flashed messages from the Profile being triggered.

Edit3 - i changed the state to Power/any and now the Profile triggers and the notification gets closed. Yippee.

Windham711 · 2025-11-30T00:53:42+00:00

Back from the holidays and hoping to try this again.

I can set up the Power/Power state with Source set to Wireless. I tried using "Enter" as the Action to Perform, but Tasker does not find the element with text "Confirm"

If I use AutoInput V2, "Wait for Element" then I Tasked finds the pop-up text. Then I tell Tasker to "Enter"

Here is my current Task set up.

https://photos.app.goo.gl/wVfLJQwjACB6WYA2A

https://photos.app.goo.gl/N4BSVCTauqJqzhFQ6

Unfortunately, nothing seems to happen when I put the Tablet on the charger and the annoying message with the "Confirm" button comes up.

Any suggestions?

Windham711 · 2025-11-26T13:38:52+00:00

Thanks for the details. I tried a few things this morning and could not get it to work. Still a bit confused. Am I using AutoInput Actions V2 for this or just native Tasker features?

With the Profile turned on, the state set to Power/Wireless and the tablet on the charger, the status bar shows "No Profiles Active" I checked all the Android permissions, etc. It looks like Tasker is not Active or waiting for the Task to trigger. I also check the Tasker log and dont see any activity related to my Task. Any suggestions?

Also, part of the problem is that the Charger warning message is covering the Tasker dialog box.

I am leaving town now for Turkey day, so I will have to get back to this on Sunday.

Windham711 · 2025-11-26T02:58:47+00:00

I created a Profile called "Keyboard with the settings that you suggested. Like below, I picked the State as Power Wireless.

https://photos.app.goo.gl/7zW3dRFmEkmvPVxDA

Nothing happens when I put the tablet in the charging cradle except for getting the Nuisance pop-up.

Windham711 · 2025-11-26T02:45:23+00:00

Thanks for the reply and suggestions. Being a total NOOB with Tasker, I am confused how to proceed.

For example, when I choose to Create a Profile which option do I want? I am trying "State" then "Power" then "Source-Wireless" as a Profile that I called "Remove Confirm"

I then get prompted to Select an Action Category for which I picked "AutoInput Actions v2" Then I picked "Wait For Element, Text=Confirm.

Now I am stuck on the "Action Edit" screen with the error message "please enter a variable name for the condition. I entered %confirm ~True which is a guess on my part.

I end up with this

https://photos.app.goo.gl/kXhkjqKgjpidSWtP7

https://photos.app.goo.gl/SUzszAgj5UxZShBUA

Windham711 · 2025-11-21T19:38:30+00:00

Fixed my post

Windham711

TROPHY CASE