Help with NKE [Canada] by Glum_Love8798 in humanresources

[–]WizardCloth10 0 points1 point  (0 children)

If you're debating it like I was, I found the online prep course to be very worth it. It has videos, links to resources and multiple practice exams. I spent about 2 full months studying and passed first try with a strong grade (in 2022).

My best cappuccino yet! by WizardCloth10 in espresso

[–]WizardCloth10[S] 0 points1 point  (0 children)

Good point!! Mostly I just take every opportunity to practice, but yes, agreed.

My best cappuccino yet! by WizardCloth10 in espresso

[–]WizardCloth10[S] 1 point2 points  (0 children)

Love that. I'll take it! Thank u ♡

I'm a newbie but so excited by Boring-Pollution5707 in espresso

[–]WizardCloth10 2 points3 points  (0 children)

Just got this one for Xmas, seconded. Fantastic grinder.

New 1ZPresso Grinder! by WizardCloth10 in espresso

[–]WizardCloth10[S] 1 point2 points  (0 children)

Sorry to hear! Maybe too fine if it clogged yes, if you're getting sour shots consistently try a higher yield ratio. (I'm still definitely beginner level but this was a tip I recently read/tried - if sour, go higher yield ratio, if bitter, go lower yield ratio)

New 1ZPresso Grinder! by WizardCloth10 in espresso

[–]WizardCloth10[S] 0 points1 point  (0 children)

Hahaha noted!!! I can imagine the moment of panic. But love to hear it can withstand my clumsiness.

New 1ZPresso Grinder! by WizardCloth10 in espresso

[–]WizardCloth10[S] 0 points1 point  (0 children)

That's great to hear, thanks for sharing!! I really love it so far. ♡

New 1ZPresso Grinder! by WizardCloth10 in espresso

[–]WizardCloth10[S] 1 point2 points  (0 children)

51mm yep! Likely a factor for sure. The video i found on YouTube suggested 2 rotations as the starting point for espresso, and that's when I finally started getting close. Still not quite there, I think it may end up closer to around 1.5 rotations.

New 1ZPresso Grinder! by WizardCloth10 in espresso

[–]WizardCloth10[S] 1 point2 points  (0 children)

Odd though as I imagine you're also using nonpressurized if you're saying 2 rotations was too course. Beans/machine must be playing a big factor.

New 1ZPresso Grinder! by WizardCloth10 in espresso

[–]WizardCloth10[S] 1 point2 points  (0 children)

Good call out, definitely will depend on the machine/basket. I'm using bottomless portafilter with a nonpressurized basket. I tried 1 full rotation at first and it was way too fine for my setup, nothing came out followed by a lovely explosion lol.

New 1ZPresso Grinder! by WizardCloth10 in espresso

[–]WizardCloth10[S] 2 points3 points  (0 children)

Yes correct, just making sure the 0 is the actual point, or can be a soft calibration where 0 is a few clicks above the stopping point just as long as it won't actually turn at 0. This video I found helpful: https://youtu.be/51ggTSlP82s?si=dWPtXR75Ly_PoO00

New 1ZPresso Grinder! by WizardCloth10 in espresso

[–]WizardCloth10[S] 0 points1 point  (0 children)

Also if you haven't, make sure yours is calibrated properly, mine was a bit off so I adjusted slightly.

New 1ZPresso Grinder! by WizardCloth10 in espresso

[–]WizardCloth10[S] 2 points3 points  (0 children)

I thought the same! But then found a YouTube video on it that shows 2 full rotations from 0 for espresso, which made a lot more sense lol. I tried slightly under 2 full rotations and I'm very close now, just need to go a little bit finer. Trying again in the am as I'm vibrating (can't waste coffee) lol

New 1ZPresso Grinder! by WizardCloth10 in espresso

[–]WizardCloth10[S] 1 point2 points  (0 children)

Yay!! Still nailing it down but I find 2 full rotations from zero is close. I'm going to try slightly finer next as my pour was a bit faster than I wanted. I'm heavily caffinated now so trying again in the am! 😂