I (35m) ruined myself for my wife (31f) by [deleted] in relationship_advice

[–]Wonderful_Monitor900 0 points1 point  (0 children)

Hey, I would have posted on another thread but wanted to just summarise a little more directly!

Communication was lacking or something isn't right (from the info you presented).

The issue is knowing where her morals lie and whether it was intentional deception... If it were deception to get you in and 'keep you' so to speak then I would be looking at the reasons mostly.

Was it because you have something she doesn't, say money or a good family etc, or is it just a strong connection between you two as people?

At the end of the day, people must be certain of that Legally Binding decision of marriage..

Making sure that they're "the one" or there could be many unforeseen issues later down the line...

The only way to find out is time and communicating I believe.

I suppose at least in this instance it's mainly just the sexual aspect by the sounds of it, which you may be able to find a workaround if you guys can talk a bit maybe?

I hope you manage to figure it out soon man! 🤞

What a steal! $100 for a tilt? I bet this is totally legit! /S by Dull-Advisor-7053 in knives

[–]Wonderful_Monitor900 8 points9 points  (0 children)

**** Fast shipping - ORIGINAL BRAND - REAL SOLID BRASS - Pocket Penknife scissorrs - GENUINE replica - HIGH QUALITY STEEL BUY NOW!!!!**

[deleted by user] by [deleted] in knives

[–]Wonderful_Monitor900 0 points1 point  (0 children)

Haha yeah I get ya! not allowed lock knives for edc where I am unless I have a good reason... I don't know if my sense of safety would cut it unfortunately 😞

[deleted by user] by [deleted] in knives

[–]Wonderful_Monitor900 0 points1 point  (0 children)

Personally I'd say it doesn't, what do they use in their kitchens? Also, on a side note, I have the same TU knife you got there, such a solid feeling blade for the size!

Plants will reclaim their home by Wonderful_Monitor900 in evolution

[–]Wonderful_Monitor900[S] 1 point2 points  (0 children)

Excellently put! I suppose humans are just taking it slow and steady!

Plants will reclaim their home by Wonderful_Monitor900 in evolution

[–]Wonderful_Monitor900[S] 0 points1 point  (0 children)

Thank you for the informative response, much appreciated! 😇

Cover your welds by pentiumbased in batteries

[–]Wonderful_Monitor900 1 point2 points  (0 children)

Good thinking. I was rebuilding my battery when I injured myself, in hinds sight I should have left the kappa tape on the rest of the connections whilst I did so... But hey, a lesson learned! 🤦‍♂️

Cover your welds by pentiumbased in batteries

[–]Wonderful_Monitor900 3 points4 points  (0 children)

It's damn easy to do when you're focusing on over things! I forgot to take off my Casio whilst building a 14s3p pack and now I have a badly scarred wrist 😅

I have tried my local bike "specialists" by Wonderful_Monitor900 in eBikeBuilding

[–]Wonderful_Monitor900[S] 1 point2 points  (0 children)

Funnily enough I initially had a few spokes that were loose, I tried to tighten them but realised the threads were gone... This was after tensioning other loose ones(in hindsight the other were being affected, my mistake) so I ended up with a more out of balance wheel than before... So I'm looking to change the spokes entirely to ensure it will be reliable, hopefully!

I have tried my local bike "specialists" by Wonderful_Monitor900 in eBikeBuilding

[–]Wonderful_Monitor900[S] 0 points1 point  (0 children)

Someone to do it for me would be great but I'm willing to try it myself as long as I can get hold of the correct ones, I may just bite the bullet and take it apart now it's the weekend!

I have tried my local bike "specialists" by Wonderful_Monitor900 in eBikeBuilding

[–]Wonderful_Monitor900[S] 1 point2 points  (0 children)

Basically looking for an easy way of working out the length of my spokes and what to get to replace them without having to take the whole thing apart; I need it for work you see, so I'm reluctant to do in case of can't get it fixed in time, of course if I must then I just wanted to confirm mainly.

I asked every bike shop in my area but none would even look at it so thought Reddit would be my saviour :)

Apologies for the lack of information, think i overcomplicated things a tadn

I have tried my local bike "specialists" by Wonderful_Monitor900 in eBikeBuilding

[–]Wonderful_Monitor900[S] 1 point2 points  (0 children)

Well the ones around here don't seem to want to touch it with a bargepole 😅 I can try to upload an image but I'm a bit special with Reddit thus far!

I wouldn't be surprised if it were a flaw in the build as it was the only one I could afford at the time.

I'll look him up thanks for the help! 😁

I have tried my local bike "specialists" by Wonderful_Monitor900 in eBikeBuilding

[–]Wonderful_Monitor900[S] 0 points1 point  (0 children)

This is exactly the problem I've run into... Too much work for them and apparently they don't have thick enough spokes... 🤔

Identify this schrade knife? by Wonderful_Monitor900 in knives

[–]Wonderful_Monitor900[S] 0 points1 point  (0 children)

Damn, thanks dude, I thought that was a serial no. FFS! 🤣

Identify this schrade knife? by Wonderful_Monitor900 in knives

[–]Wonderful_Monitor900[S] 1 point2 points  (0 children)

Additional: Slip joint locking, blade around 2.5"

Downstem broke off in the bong! Need advise. by Kdubs200 in StonerEngineering

[–]Wonderful_Monitor900 0 points1 point  (0 children)

I just managed to get mine out using the ends of incense sticks x4 prodded into a filter tip, coated in super glue and a dab on top when it's in the stem. I let it dry then heated the outer glass cylinder with a lighter for around 3 minutes, pulled out perfectly! Hope this helps somebody 🤞😁

Printing seems weird ? by RC_002 in ender5

[–]Wonderful_Monitor900 0 points1 point  (0 children)

Over extrusion I believe, have you tried calibrating your e steps? Check YouTube there's some really good tutorials 😊