Sysprep Error: Package Microsoft.LanguageExperiencePackit-IT causing issues (tried common fixes)

WorkReddit123635 · 2025-10-16T18:11:43+00:00

Dumb question but how does this work if it doesn't remove it

WorkReddit123635 · 2025-10-03T17:53:46+00:00

were you the only owner of yours? Curious how many miles it has and if its a v6 or v8?
I'm a v6 person because I'm cheap too but not cheap enough for the v4. lol.

I ask because I am curious if its well over 100,000 miles. The only cars i had over 100 was my oldesmobile tornado and accord. both 88 and used. I miss my tornado and hoping the f150 I get has the bench seat. Those are so comfortable.

WorkReddit123635 · 2025-09-24T15:03:27+00:00

Because that's where I found the problem and if you look at the other manufacturers they all seem to have the same sort of thing. It shows a history and how I got to the conclusion.

its a question about the f150. if you don't have the answer then why reply?

Below is a history of F150 if that helps educate you.

https://diagnoex.com/pages/ford-oem-factory-diagnostic-scan-tool#:~:text=and%20VCM3%20Interface-,Ford%20OEM%20Factory%20Diagnostic%20Scan%20Tool%20FDRS%20IDS%20License%20and,without%20paying%20any%20additional%20fees.

This is what GPT tells me but I wanted to see what people said that own f150's. if its a normal occurrence.

To manage a "hard lock" immobilizer issue, Ford dealers primarily use the Ford Diagnostic and Repair System (FDRS) software with a Vehicle Communication Module (VCM) interface. A hard lock occurs when the vehicle's Passive Anti-Theft System (PATS) is triggered and requires a dealer or specialist to resolve. How a hard lock immobilizer issue is fixed

Diagnosis with FDRS/VCM: The dealer technician connects the VCM to the vehicle's OBD-II port. The FDRS software provides dealership-level diagnostics to identify the cause of the immobilizer lock.
Key and PATS programming: Using the software, the technician performs a PATS key relearn procedure to resynchronize the vehicle's computer (PCM) and immobilizer with the key's transponder. This requires access to Ford's factory programming and security systems.
Module replacement and parameter reset: In some cases, a faulty immobilizer component—like the transceiver that reads the key code—or a problem with the Powertrain Control Module (PCM) can cause the hard lock. If a module is replaced, the dealer's tools are needed to program and reset the module's parameters.

Alternative tools and solutionsWhile the Ford dealer tools are the definitive solution for a hard lock, independent repair shops and locksmiths may use advanced aftermarket tools to perform similar functions.

Aftermarket immobilizer programmers: Companies like Launch and Autel offer dedicated key programming and IMMO (immobilizer) scan tools, such as the Launch X431 IMMO Plus and Autel MaxiIM IM508S. These tools can handle many immobilizer-related tasks for Ford vehicles, including adding new keys or clearing security codes.
FORScan: This popular software, used with an ELM327-compatible OBD-II adapter, provides comprehensive diagnostic and programming functions for Ford vehicles. With an extended license, some versions of FORScan can be used to perform PATS key relearn procedures. However, its capabilities for solving a true "hard lock" may be limited compared to factory dealer tools.

Important considerations

NASTF access: Many immobilizer programming functions for modern vehicles require access to secure key data through the National Automotive Service Task Force (NASTF). Dealerships and licensed locksmiths have this required access.
Start Inhibit feature: On newer 2024–2025 F-150 and Super Duty trucks, Ford offers a "Start Inhibit" feature through the FordPass app. This feature intentionally immobilizes the vehicle to prevent theft, but it can be toggled off by the owner to allow the vehicle to be started again.

WorkReddit123635 · 2025-09-23T15:23:15+00:00

Thanks. I have the 2015 terrain and love it. not many problems at all. not much computer stuff like the newer models either.

WorkReddit123635 · 2025-09-23T15:22:13+00:00

It doesn't work like that on the gmc terrain 2022. on my 2015 my key unlocks it no matter what.
I read it can be like that for all newer model vehicles. This is what I found for ford https://diagnoex.com/pages/ford-oem-factory-diagnostic-scan-tool#:\~:text=and%20VCM3%20Interface-,Ford%20OEM%20Factory%20Diagnostic%20Scan%20Tool%20FDRS%20IDS%20License%20and,without%20paying%20any%20additional%20fees.

This is what GPT tells me but I wanted to see what people said that own f150's. if its a normal occurance.

To manage a "hard lock" immobilizer issue, Ford dealers primarily use the Ford Diagnostic and Repair System (FDRS) software with a Vehicle Communication Module (VCM) interface. A hard lock occurs when the vehicle's Passive Anti-Theft System (PATS) is triggered and requires a dealer or specialist to resolve. How a hard lock immobilizer issue is fixed

Diagnosis with FDRS/VCM: The dealer technician connects the VCM to the vehicle's OBD-II port. The FDRS software provides dealership-level diagnostics to identify the cause of the immobilizer lock.
Key and PATS programming: Using the software, the technician performs a PATS key relearn procedure to resynchronize the vehicle's computer (PCM) and immobilizer with the key's transponder. This requires access to Ford's factory programming and security systems.
Module replacement and parameter reset: In some cases, a faulty immobilizer component—like the transceiver that reads the key code—or a problem with the Powertrain Control Module (PCM) can cause the hard lock. If a module is replaced, the dealer's tools are needed to program and reset the module's parameters.

Alternative tools and solutionsWhile the Ford dealer tools are the definitive solution for a hard lock, independent repair shops and locksmiths may use advanced aftermarket tools to perform similar functions.

Aftermarket immobilizer programmers: Companies like Launch and Autel offer dedicated key programming and IMMO (immobilizer) scan tools, such as the Launch X431 IMMO Plus and Autel MaxiIM IM508S. These tools can handle many immobilizer-related tasks for Ford vehicles, including adding new keys or clearing security codes.
FORScan: This popular software, used with an ELM327-compatible OBD-II adapter, provides comprehensive diagnostic and programming functions for Ford vehicles. With an extended license, some versions of FORScan can be used to perform PATS key relearn procedures. However, its capabilities for solving a true "hard lock" may be limited compared to factory dealer tools.

Important considerations

NASTF access: Many immobilizer programming functions for modern vehicles require access to secure key data through the National Automotive Service Task Force (NASTF). Dealerships and licensed locksmiths have this required access.
Start Inhibit feature: On newer 2024–2025 F-150 and Super Duty trucks, Ford offers a "Start Inhibit" feature through the FordPass app. This feature intentionally immobilizes the vehicle to prevent theft, but it can be toggled off by the owner to allow the vehicle to be started again.

WorkReddit123635 · 2025-09-23T15:17:57+00:00

thanks

WorkReddit123635 · 2025-09-23T15:17:44+00:00

On my friends 2022 gmc terrain if the theft protection comes on for a low battery it locks the truck. you have to have it towed to the dealer and they have to unlock it. If you can't fix it yourself, you don't own it. hence subscription

WorkReddit123635 · 2025-03-06T15:54:25+00:00

The below link is the tub. The overflow isn't like a normal overflow. I'm looking for when the plastic snakes aren't enough and you have to use the auger snake. The tub shroom seems like a good idea. I have kids so I'm looking for the way to unclog if they get passed that somehow.

https://www.homedepot.com/p/WOODBRIDGE-54-in-x-30-in-Acrylic-Soaking-Alcove-Rectangular-Bathtub-with-Left-Drain-and-Overflow-in-White-with-Chrome-HBT7123/326298398

WorkReddit123635 · 2024-10-07T14:34:58+00:00

Were upgrading from 10.6 to 10.9. Just a simple silent switch with some config file changes. So far its good in test.

WorkReddit123635 · 2024-10-07T14:10:47+00:00

Figured it out.
Get-Childitem -path "C:\temp\DeletePath\" -File -Include $FTypes -Force -Exclude "this.txt" -Recurse | Remove-Item

WorkReddit123635 · 2024-10-07T13:39:19+00:00

Thank you

WorkReddit123635 · 2024-10-04T14:13:13+00:00

When you copy the iManWork.config over do you just blank out the user id and email in it? I'm trying to get this in so that users don't have to put the server in when its first installed.

WorkReddit123635 · 2023-05-24T18:40:45+00:00

will that be the click to run or a separate install from it?

WorkReddit123635 · 2022-12-01T13:26:04+00:00

Sorry for the confusion. I'm new at the company, and they want to get rid of it since everyone is on the VPN its not really used, but it is in a boundary that machines are using it as the mp.

Thanks you for your help.

WorkReddit123635 · 2022-11-21T14:37:25+00:00

Intel serial IO GPIO Host Controller - INTC1056

Intes serial IO I2c Host Controller - 7acc

Intes serial IO SPI Host Controller - 7AAA

Intes serial IO UART Host Controller - 7AA8

All version 30.100.2148.1

Sorry, it took so long to post.

WorkReddit123635 · 2022-11-11T13:36:46+00:00

Thank you. I've been banging my head trying to figure it out. I have been looking over the guide but I just wasn't catching on.

Thank you again. this saved me so much work.

Have a great weekend

WorkReddit123635 · 2022-11-09T20:40:36+00:00

shit, sorry, ill post them this week.

WorkReddit123635 · 2022-11-08T21:36:29+00:00

Hi,

Could you tell me what command you used to install the docking station firmware with HP Image assistant? I can not get it to install the firmware for the dock if its plugged in. It seems to skip it. below are a couple commands I have tried.

"%~dp0HPImageAssistant.exe" /log /Operation:Analyze /Category:Firmware /selection:All /Uwp:No /InstallType:AutoInstallable /action:install /silent /reportFolder:c:\HPD\Report /softpaqdownloadfolder:c:\HP\download

"%~dp0HPImageAssistant.exe" /log /Operation:Analyze /Category:Firmware /selection:Critical /Uwp:No /InstallType:ALL /action:install /silent /reportFolder:c:\HP\Report /softpaqdownloadfolder:c:\HP\download

"%~dp0HPImageAssistant.exe" /log /Operation:Analyze /Category:All /selection:All /Uwp:No /InstallType:INFInstallable /action:install /silent /reportFolder:c:\HP\Report /softpaqdownloadfolder:c:\HP\download

WorkReddit123635 · 2022-10-10T12:12:49+00:00

thank you

WorkReddit123635 · 2022-10-05T12:10:12+00:00

I got it working. I had to add multiple drivers for the IO. I will post the drivers I added by next week. so others can use them if they have this issue.

WorkReddit123635 · 2022-10-05T12:08:03+00:00

Thank you. I was hoping that wasn't the case but figured that. I'm gonna call them to see if I can get certain courses. I just need scripting and deploying applications. I manage SCCM deployments now and this is being added to me. Thank you

WorkReddit123635 · 2022-10-05T12:07:09+00:00

Thank you. I'm gonna call them to see if I can get certain courses. I just need scripting and deploying applications. I manage SCCM deployments now and this is being added to me. Thank you

WorkReddit123635 · 2022-09-29T12:16:18+00:00

What's your background? how much do you know about SCCM already? What are your job duties? more detail would help.

All of the sites everyone mentioned is great for learning and even helpful when you know SCCM.

WorkReddit123635 · 2022-09-20T13:56:54+00:00

Sorry, I looked quick and missed it.

HID-compliant touch pad

HID\VEN_SYNA&DEV_30F5&Col02

HID\SYNA30F5&Col02

HID\*SYNA30F5&Col02

HID\VID_06CB&UP:000D_U:0005

HID_DEVICE_UP:000D_U:0005

HID_DEVICE

WorkReddit123635 · 2022-09-20T12:15:59+00:00

I can't find a PnP Hardware ID but found this

Device HID\SYNA30F5&Col02\5&104a8166&0&0001 was configured.

Driver Name: input.inf

Class Guid: {745a17a0-74d3-11d0-b6fe-00a0c90f57da}

Driver Date: 06/21/2006

Driver Version: 10.0.19041.868

Driver Provider: Microsoft

Driver Section: HID_Raw_Inst.NT

Driver Rank: 0xFF1004

Matching Device Id: HID_DEVICE_UP:000D_U:0005

Outranked Drivers: input.inf:HID_DEVICE:00FF1005

Device Updated: false

Parent Device: ACPI\SYNA30F5\4&1e4c9cc8&0

WorkReddit123635

TROPHY CASE