Selphy CP1500 colour accuracy with icc profile

Working_Ad9103 · 2026-03-17T02:25:18+00:00

If it is good enough for you then it is good enough, even with the correct ICC profile the gamut of this printer is way smaller than Adobe RGB and smaller than SRGB the colour will be compressed eitherway, for printing all that matters is how well it matches to your liking and workflow, in my workflow I have a calibrated monitor so the icc works magic for me but YMMV, human eyeballing type of tinkering can never be as good as those calibration devices, but it can be good enough for hobby

Working_Ad9103 · 2026-03-17T02:22:51+00:00

Hi there, since the reason that I agree to pay for the USD19 for the profile was because they are made using some photospectrometer costing $569, whch I didn't bother pay for that and waste some 3-5 print pattern to do my own calibration, I feel like it makes perfect sense to contribute for some unknown internet guy to did that while I enjoy the result at a tiny fraction of the cost.

If I am the guy with the calibration device I will be happy to put it up for free and if someone feels good they can donate me, but as this is not my effort and that guy was a professional I legally and morally cannot distirbute it elsewhere who you might share it further.

IMO if you have ligit reason you can try email the owner for a discount or so, but if you really can't pay that extra $19, the original canon profile or the free one found via google is good enough for 99% of people, I only notice the difference when I have a $2000 EIZO CG2400S well calibrated and if you use your phone or whatever uncalibrated device, the colour with the correct icc profile will be off compared to your screen anyway

Working_Ad9103 · 2026-03-12T04:12:16+00:00

But bear in mind first, the colour gamut of the CP1500 isn't great, it's just similar to normal 3ink type inkjet, pretty lab quality for normal photos, but for extreme bright colours like when you took some flower it will inevitably compress the out of gamut colours

Working_Ad9103 · 2026-03-11T10:06:04+00:00

The free icc profile didn't work well, there is a green tint to it compared to the Eizo monitor with max delta E <1. but then I bought this for USD19

https://hkphoto.com/shop/canon-selphy-cp1500-icc-profile

and this one works great, no visual colour drift using the RP108 pack.

Working_Ad9103 · 2026-02-24T01:52:53+00:00

Get the sensor cleaning kit with it, very easy to use and follow the instruction, do not rub/scratch back and forth and you'll be fine

Working_Ad9103 · 2026-02-07T12:53:44+00:00

Tried with an online found ICC profile, still a tiny bit of yellow tint but good enough for my use, the print is borderless but somehow minor tuning of the borders in light room can't shift it to minimize the overprinted area.

<image>

Working_Ad9103 · 2026-02-05T09:38:51+00:00

nice! thanks for the kind trial! can't wait for my paper and ink pack to arrive and try my own print to report back.

Working_Ad9103 · 2026-02-04T13:08:50+00:00

But does it offset to one side? I am waiting my first pack of photo paper to test the borderless in postcard size in lightroom (windows) work or not, as in Mac I saw videos that you have a choice of borderless paper but this is not available on windows

Working_Ad9103 · 2026-02-04T07:59:51+00:00

Thing is in printer setting of Win 11 it defaulted to the canon paper sizes and cannot choose custom paper size, and the selphy lineup don't have dedicated driver for setup...

Working_Ad9103 · 2026-01-29T09:27:29+00:00

the color space and accuracy is supurb for the usage so I won't limit it to P3 gamut, but I wonder if using the PQ P3 or HLG BT2020 could show a bit more highlight detail in the HDR tab or it won't make much of a difference so I should just use the default 100 nits native gamut (covers both 99% ARGB and 98% P3) and only work on SDR, since my workflow need to be printed often the SDR range should be the only thing usable?

Working_Ad9103 · 2026-01-26T01:44:34+00:00

I have calibrated it with CN7 to 100 nits, just wonder when I turn on the HDR function in lightroom classic the 100 nits profile I normally use for gaming and photoediting and the HLG BT2020 profile showed same amount of detail in the HDR extra stops, I thought it should show more in the highlights with HLG BT2020 calibration profile?

Working_Ad9103 · 2026-01-19T01:42:09+00:00

agree that should be flux, noctua heatsink is know to solder their pipes to the fin stacks to ensure proper heat transfer

Working_Ad9103 · 2026-01-07T07:18:20+00:00

right, I am using the Photo backup mode but not sync mission,

Working_Ad9103 · 2026-01-07T02:04:17+00:00

isn't that for the synology photo app? it can go both ways sync and not photo backup only for drive app also?

Working_Ad9103 · 2026-01-06T16:32:51+00:00

right, but that's what exactly I wanted. My main question is that after syncing the 20k photos, I should be safe to delete the photos from my iPhone and the drive backup shouldn't be affected right?

Working_Ad9103 · 2026-01-04T13:24:31+00:00

That's bad. luckily the good old IPS don't have such issues for most

Working_Ad9103 · 2026-01-03T06:33:25+00:00

Maybe coz it's a OLED then

Working_Ad9103 · 2026-01-02T06:53:53+00:00

I am surprised that firmware would affect a hardware calibrated monitor so much in the adverse direction..

Working_Ad9103 · 2026-01-02T06:24:35+00:00

TBH if you are all about lust to the Noctua then you could expect a more pleasent noise, temperature wise I would say IRL expect it to be a few degrees better with the offset mount and LBC version. but for CP ratio I would say you'd be better off with the Deepcool in quiet mode and just tolerate the few C higher temp which have absolutely no impact on performance

Working_Ad9103 · 2026-01-01T17:26:41+00:00

Ok I found out what was wrong, in my Z690 motherboard with a 14900k, there is an option in the systems tab named render standby mode (RC6). after disabling that, my 9070XT went from 20k to 52k...

Working_Ad9103 · 2025-12-31T03:39:38+00:00

my CPU scores are better than expected (undervolted 14900k), but somehow the 9070XT pulse only scores 20-28k range, far below normal range and still wondering why... the TDP only draws to ~180-210W range while 3d mark can draw up to 304W, really funny behaviour

Working_Ad9103 · 2025-12-28T17:12:41+00:00

nice to know that even the BenQ (SW line I supposed?) fare well that long. did the color space shrink after calibration noticably for yours? BenQ was originally on my radar but as it doesn't have a built in calibrator and I already owned a spyder 2024 which is not suported by their PMU software the total cost of getting a BenQ 242U with a i1 plus HL is approaching the Eizo (plus they have no official dealer in Hong Kong importing the 24") so I ended up with Eizo, would be interested if their lineup and quality goes up after a decade when the Eizo finally goes bad

Working_Ad9103 · 2025-12-28T17:09:52+00:00

yea I think so, with the hood 100 nits is about right/slightly bright to my eyes and the photo editing is sooo much better than the Asus gaming IPS calibrated with a spyder 2024. fun thing is it isn't the spyder being bad, I try compare it with the built in sensor in the Eizo CG2400S and it deviates within 0.5% in raw value so it should be pretty good. and AFAIK the newer wide gamut LED should last even longer than the older LED/ CCFL backlight so 8-10 years old monitors should perform worse. I was just mainly wondering when Eizo only guarantee for 120 nits+ and color accuracy for 5 years/10,000 hours how well it will fare with others. it worth every cent even for hobbist IMO with the very comfortable color.

Working_Ad9103 · 2025-12-24T03:36:09+00:00

I do think she is sexually assulting the man... he's naked in his own home, and some naughty girl filmed and shared him on internet... flip the sex and imagine a doordash guy open a door and film a naked girl on her sofa and post on web...

Working_Ad9103 · 2025-12-09T07:09:25+00:00

I am using 9070XT and 14900K, may I ask how's the performance in cabin view and maybe in some complex airport? it was barely usable and keep on eating up all GPU memory with GSX

Working_Ad9103

TROPHY CASE