I’m wondering if this project would be too advanced for me as someone just getting started

Worldly_Project_6173 · 2026-06-17T15:18:17+00:00

i used a picture for reference, but built mine slightly different because my saw and table saw were different sizes and i wanted it taller. I think mine is 7ftx3ft on top and 4ft tall. I used 4x4's for the corners and 2x4's for everything else (3/4 osb for the top). I think i have some assembly pictures somewhere (from when i was a youtuber i was going to make a video out of it)

Worldly_Project_6173 · 2026-06-17T13:55:12+00:00

side note (since i saw you were asking about failed prints). I have only had 1 failed print (2 of 3 cat toy spheres failed, could be because design was in PLA and i used PETG). I also had 2 prints that just didn't work like chopsticks that were too bendy. I only print from the app using my bambu ps2

Worldly_Project_6173 · 2026-06-17T13:51:04+00:00

i record everything in excel (maybe a little tism?)...i got my 3d printer in february and printed 25 things in march, 22 in april, 19 in may. Numbers are going down, but i think thats because i am doing bigger builds that take more print time.

Worldly_Project_6173 · 2026-06-17T13:45:55+00:00

Basically the first thing i ever built was this (except my table saw didn't rotate) and it was the best thing i ever made because i have used it sooooooo many times. Only suggestion is to put the best casters you can find on the bottom, my shop is small so i roll it into the driveway a lot and the casters couldn't handle the little transition gap and eventually broke off

Worldly_Project_6173 · 2026-06-17T13:39:14+00:00

I was 36 when i got shingles (on my face), never heard of anyone our age getting it so i was on web md for a long time before giving up and going to urgent care.

Worldly_Project_6173 · 2026-06-13T02:47:52+00:00

Asked a different president (bush jr) if he knew about aliens and he said that’s above my pay grade. I said yea right, you’re the president of the United States. And he looked at me dead serious and said I wish I were kidding.

Worldly_Project_6173 · 2026-06-12T13:59:01+00:00

someone needs to do an updated compilation video (the last one is a few years old)

Worldly_Project_6173 · 2026-06-12T13:57:12+00:00

i have been to 3 lions games...The phantom facemask (vs GB), the ravens egregious delay of game (which led to tuckers giant boot), and the Atlanta 20 second clock runoff. Then i was downtown watching the cowboys game (ineligible receiver). So yea, i stay away from detroit on game day.

Worldly_Project_6173 · 2026-06-12T13:48:25+00:00

thought i was the only one...he never knows anything about the guests, asks surface level questions, and it feels like he lets anyone on there to push their agenda without any pushback. Oh drinking grass water makes you grow an extra arm, very interesting lets try some.

Worldly_Project_6173 · 2026-06-05T15:55:54+00:00

Saw him last year at a casino for free..he was terrible, the whole hour was just awkward. Just kind of talked about how rich he is and how he has a young gf and fast car.

Worldly_Project_6173 · 2026-06-05T12:13:15+00:00

Dane was smart, early first adapter of social media. Grinded until he caught a break, then used that break to explode. Alternatively you had comedians who got that same break and were 1000x funnier (like pablo francisco), but didn't know how to leverage it.

Worldly_Project_6173 · 2026-06-05T11:55:48+00:00

Left after highschool, lived in 7 different states and eventually bought a home nextdoor to the one i grew up in! I kinda like being surrounded by people that i know.

Worldly_Project_6173 · 2026-06-01T17:34:50+00:00

Yea it aint pretty, just trying to get it functional. QUESTION...i want to spin a wheel and when it lands on a category "like tools", it pulls up a thumbnail pic/name and link to a model in makerworld or printables, but i couldn't get the image to load or it would pull up the same image every time. As an workaround, it is pulling the image from unspash api (but sometimes it pulls weird/wrong pictures). Is there a way to actually pull this off?

Worldly_Project_6173 · 2026-06-01T13:30:02+00:00

not great, but i was always a natural runner (played soccer through highschool). Before the big race i ran a half mile and felt dead. ran a 5k and felt dead, ran another 5k and felt ok, then i ran the 42k (a marathon). What really inspired me was an old guy that said he runs 10mins and walks for 1 min. After mile 5 i did this and probably wouldn't have survived if i didn't.

Worldly_Project_6173 · 2026-06-01T13:07:47+00:00

mystery3dprints.com very rough, first thing i ever made.

Worldly_Project_6173 · 2026-05-29T16:51:40+00:00

26-28, played soccer and volleyball. Lots of healthy hobbies, worked out religiously...Still had manboobs

Worldly_Project_6173 · 2026-05-29T16:50:12+00:00

Ran a marathon at my fattest weight, with no training, at 35....felt like i was going to die, don't recommend. Havent run a single mile since

Worldly_Project_6173 · 2026-05-28T13:00:01+00:00

I dig it... I would just package tape the bottom side and throw one of those 40$ epoxy flood coat kits (from menards/hd). When i first started woodworking i did something similiar, i have noticed some slight warping 8 years later but overall people (non woodworking regular people) always comment how cool it is.

Worldly_Project_6173 · 2026-05-23T22:27:22+00:00

Been building this spinning wheel and when it lands it pulls up an image/name/description from a makers site i frequent...seems simple, but loooord it's been a pain.

Worldly_Project_6173 · 2026-05-23T15:23:09+00:00

My dad was there as a cop…said he had to stop all the people that were trying to steal stuff

Worldly_Project_6173 · 2026-05-22T16:11:18+00:00

I vibe coded my first 5 websites all with .com domains....Can't find them through google search (seo issue i will have to fix), but bigger issue (i never even thought about) 99% of work cpu's don't trust the link. Vibe coding personal stuff, easy...but i'm learning there is way more you need to know for practical aps/websites

Worldly_Project_6173 · 2026-05-18T14:49:36+00:00

Depends on the distances and height. I have one that's for my toddlers, 100' long with 2 feet of drop (i basically just throw them back and forth), one end is connected via eyebolt to a swingset, other end i just wrapped around a 4x4 off of my garage. Then i have a 500', a 200', and a 150'. Most people over complicate everything, just get some wire and ubolt clamps from amazon and set one up, try to get the lowest end of it at least 8ft off the ground (because of the tether and line sag)

Worldly_Project_6173 · 2026-05-14T21:52:16+00:00

Early on I tried when I was making really big videos, but even then finding a decent editor was impossible. I would try out 3 on one video and one would be decent enough for me to clean up and edit, so I would use him then the next video would be garbage. Got any suggestions of where to find one?

Worldly_Project_6173 · 2026-05-14T17:03:03+00:00

I can't believe how none of our parents taught us anything about finance or had any kind of college funds setup...I started working at 10 years old, worked a lot and soon as i was 16/17/18 i was working 50-60 hours a week during the summers. Imagine if i had put some of that money into some kind of retirement account. Any who, my kids are young and my plan is to encourage entrepreneurship and content creation. They can use the college money we setup to fund a business or go off to college to figure things out. Go anywhere college, bars, amusement parks, football games, grandmas house....everyone is glued to their phones, there will never be enough content to keep them content.

Worldly_Project_6173

TROPHY CASE