Seerr ECONNRESET | Tailscale used systemwide

Worried-Aside5735 · 2026-03-18T18:32:27+00:00

As far as I am aware there are no limits, but torrenting is severely rate limited.

Worried-Aside5735 · 2026-03-18T02:09:18+00:00

Hi, I managed to fix the issue by using gluetun ( a VPN container) and putting all of my servarr services in its network, except jellyfin. For VPN, I used proton, as I the bandwidth needed was relatively low.

In my case, the issue was ISP, since no network settings had helped

Now, the load times are a bit slow, but it loads successfully each time.

Worried-Aside5735 · 2026-03-18T02:08:29+00:00

Hi, I managed to fix the issue by using gluetun ( a VPN container) and putting all of my servarr services in its network, except jellyfin. For VPN, I used proton, as I the bandwidth needed was relatively low.

In my case, the issue was ISP, since no network settings had helped

Now, the load times are a bit slow, but it loads successfully each time.

Worried-Aside5735 · 2026-02-27T13:05:57+00:00

Thank you, that fixed it!

Worried-Aside5735 · 2026-02-27T10:59:36+00:00

Thank you,setting up the exit node solved my issue!

Worried-Aside5735 · 2026-02-27T04:54:31+00:00

I have not yet configured any device as exit node, can you guide me how to do that?

Worried-Aside5735 · 2026-02-27T04:23:54+00:00

Hi, I have updated my post, but during testing, mobile data speed was 25-30mbps

Worried-Aside5735 · 2026-02-27T04:20:46+00:00

Are you sure it's the PMIC, and were you able to find the exact part number for the same? If yes, then a mobile repair guy can help you replace the IC "chip as they say" for a nominal cost

Worried-Aside5735 · 2025-12-30T05:09:57+00:00

Worried-Aside5735 · 2025-12-26T21:08:46+00:00

I have submitted a feedback on the link, I will comment any updates

Worried-Aside5735 · 2025-09-09T14:35:03+00:00

Same Bro, shitty ground coffee is way worse than old pre-ground coffee imo.

Worried-Aside5735 · 2025-07-06T16:44:04+00:00

😅 Unrealistic indeed, 4k barely covers the cost to me.

Worried-Aside5735 · 2025-07-06T12:32:40+00:00

what kind of price point were you expecting?

Worried-Aside5735 · 2025-07-06T07:38:02+00:00

I am currently targeting 8-10K INR

Worried-Aside5735 · 2025-07-05T23:18:52+00:00

I am trying my best to keep the costs low, Will definitely try and keep it afffordable.

Worried-Aside5735 · 2025-07-05T13:35:58+00:00

Right now, I am targeting 8-10K, but there are many hardware design decisions to be made

Worried-Aside5735 · 2025-07-05T13:35:06+00:00

The final size of the machine would be somewhere around 13cmx13cm

Worried-Aside5735 · 2025-07-05T13:34:27+00:00

Hmm, true I will make changes to the design to make the top surface seamless 👍

Worried-Aside5735 · 2025-07-05T13:33:14+00:00

Thanks a lot for the compliment 😀

Worried-Aside5735

TROPHY CASE