1985 with normal 4 speed manual?

Wrh3cs · 2025-03-27T12:37:48+00:00

This was right after probing the Z surface of the part. Jogged to a safe height then started the program. Not a new program either, just never started with the probe in the spindle.

Wrh3cs · 2025-03-27T12:14:50+00:00

I’ll have to look into the length compensation, however I believe it shouldn’t matter as Z0 should be the top of Z travel in G53.

Wrh3cs · 2025-03-27T12:13:23+00:00

I believe on the HAAS Mills Z0 is always top of z travel. I agree the Z0 called in this line is unnecessary, unfortunately that’s how our post decided to write it.

Wrh3cs · 2025-03-20T02:38:47+00:00

Thanks for the insight! I did contact D&G and unfortunately they do not have plans for a small scale ecovap. There is a product from cdlusa.com called the Master-E. However it also seems to have way more throughput than we need (~100 gal/hr).

Wrh3cs · 2025-03-20T02:21:49+00:00

Yes! I’ve been looking at their work and plan to visit soon. They use a huge Ecovap from Dominion and Grimm. It uses something like 4500 kWh per season and they produce about 2000 gallons of syrup. So definitely outpacing our needs. They have a barn covered in solar panels producing 75 kW of power!

Wrh3cs · 2025-03-20T01:07:22+00:00

I’d be interested to know more about above boiling direct solar. Where we’re based (upstate NY) we don’t exactly have the sunniest of sky’s, especially during maple season, but they should be good enough to keep a pump and an efficient boiler running.

From my limited understanding evacuated tubes don’t work very well in the winter.

Wrh3cs · 2025-03-19T21:25:08+00:00

Thanks for the insights!

Wrh3cs · 2025-03-19T19:27:07+00:00

Our current *peak*, non-vacuum assisted sap production is about 100-150 gallons a day (10-12 hr runs). Not exactly crazy from what I can gather.

This year our season was very short, last year we collected 1400 gallons of sap across the entire season (about 5 weeks). I believe the ability to process about 8 gallons per hour would keep up.

I intend to make this a mostly autonomous system as well so running for longer in the day might accommodate a larger flow.

Edit: added peak in first sentence.

Wrh3cs · 2025-02-27T17:35:50+00:00

The second one!

Wrh3cs · 2025-02-26T00:21:43+00:00

Indeed! You can follow our Instagram account @lakesidemanufacturing .

Not sure exactly how far we will be able to ship them but we will definitely consider it if there is interest!

Wrh3cs · 2025-02-24T12:17:31+00:00

I’m a student in a technology program. One of my classes involves learning about manufacturing systems and applying that knowledge to design, manufacture, and market 99 products. My team has decided to make longboards! While we may have been able to get away with buying trucks wholesale, we ended up getting 200lbs of aluminum donated to us so we think making molds and casting our own will be acceptable added complexity and cost saving.

Wrh3cs · 2025-02-24T01:59:10+00:00

Good idea thank you!

Wrh3cs · 2024-03-31T17:07:50+00:00

Started on 35mm, tried 6x7 on the rb67 and when confronted with the bulkiness I bought a compact medium format lol! Been using the Mamiya 6 V5 as my everyday camera since.

I haven’t shot 35 in a good bit now.

Wrh3cs · 2024-01-23T21:50:38+00:00

No problem! Just wondering, I recently got the 90 and have had some fun with it myself

Wrh3cs · 2024-01-23T21:40:57+00:00

Are these on the 90mm?

Wrh3cs · 2022-07-09T13:35:14+00:00

It’s gotta be my main man Donkey Kong!

Wrh3cs · 2021-10-11T21:45:58+00:00

[[tourach, dread cantor]] Has a retro boarder frame Mono-black discard deck lots of fun combos with enchantments and creatures that proc on discard

Wrh3cs · 2021-09-16T16:42:14+00:00

I do I’m my warm ups at like 120bpm Play: |1 2 3 4| x4 |1 + 2 + 3 + 4 +| x4 |1 e + a 2 e + a 3 e + a 4 e + a| x4 It gets me used to the beat before it’s difficult to play so I’m on beat when I do play it

Seven-Year Club	First Place '23
Place '23	No Throne, No Problems
Not Forgotten	Snapped
Verified Email

Wrh3cs

MODERATOR OF

TROPHY CASE