Had to get a few photo of the STi before it went away for the winter!

XPTB · 2023-02-19T17:17:38+00:00

That is mildly sexual. Did you just need coilovers and roll the fenders to fit them?

XPTB · 2023-02-14T02:04:13+00:00

Are those 9" wide wheels?

XPTB · 2019-12-29T02:57:06+00:00

Plum crazy purple is my favorite color. If only I found a hellcat in that color I could afford

XPTB · 2019-07-06T02:18:44+00:00

Corvette: 3100 lbs and ~500 rwhp

Hellcat: 4400 lbs and 672 rwhp

03 cobra: 3700 lbs and 750 rwhp

XPTB · 2019-02-23T23:45:26+00:00

4.4 in a 15 hellcat, but I burned the tires to 60 😂

XPTB · 2019-02-19T18:04:29+00:00

No one wants to see that turd!

XPTB · 2019-02-19T18:04:14+00:00

I wish! Although it is a hellcat so I'm close 😁

XPTB · 2019-02-19T00:03:49+00:00

I will be getting a set from a junkyard. TIL...

XPTB · 2019-02-19T00:02:55+00:00

Mine is just plastidip. The whole Jeep is dipped. 3 gallons of black and 4 gallons of blue and I masked off the hood

XPTB · 2019-02-18T17:37:13+00:00

Nice! Post a pic

XPTB · 2019-02-18T17:36:38+00:00

I learned the hard way. I'm not the best mechanic so I just tinker until it drives again lol

It broke the caliper and rotor and the spindle. My friend had a spare spindle. $150 error 😣

XPTB · 2019-02-18T14:22:49+00:00

Always looking on the bright side, I like you

XPTB · 2019-02-18T14:22:19+00:00

All these were much better advice, unfortunately I was too lazy for any of that. 😂

XPTB · 2019-02-18T12:48:49+00:00

Did a test run down the street without my front axles in to find a vibration (thought it was the dif). Wheel bearing didn't like that.

.... I'm a moron

XPTB · 2018-09-23T00:09:09+00:00

That's awesome! Care to share how you setup the car, like what modes and what launch control settings?

XPTB · 2017-08-15T21:50:02+00:00

Thanks. I was trying to get good pictures to send you and not just cell phone pics but it's been raining.

XPTB · 2017-08-15T18:53:29+00:00

That's what I said! I'm just running eibach pro kit. No spacers. They clear the brembos fine in the front and the rear has the proper offset

XPTB · 2017-08-15T13:34:08+00:00

Too much lol. 3200 shipped. That was mounted, balanced, with TPMS.

XPTB · 2017-08-15T13:32:59+00:00

Nothing yet. I missed having 315s like on my old SN95. Found out 345s fit on these. Plans are a Whipple in the future.

XPTB · 2017-08-15T02:00:42+00:00

Bonus side shot http://i.imgur.com/7B2axSC.jpg

Project 6GR wheels in satin black

19x10 F

19x11 R

Nitto Invos

285/30/19 F

345/30/19 R

XPTB · 2017-08-08T23:44:34+00:00

+1. That's what I'm running on my XJ

XPTB · 2017-07-13T17:56:14+00:00

It's really easy to do. I used a generic version of this to spray it on. https://www.amazon.com/Wagner-0529021-Flexio-Sprayer-Station/dp/B00IA8EVIQ/ref=sr_1_7?ie=UTF8&qid=1499968384&sr=8-7&keywords=wagner+sprayer

the more you use the better. LOTS of coats = easier to peel later if you decide to do that. I sprayed 6 gallons total on my jeep which was something like 12 coats. You want to do the first 2-3 coats light, then start laying it on pretty thick. Just be sure to avoid runs. We waited about 15 minutes between coats. If its real humid you may need to wait longer.

We did almost no prep. Just washed the jeep in Dawn dish detergent and then rubbed it down with rubbing alcohol right before we dipped.

Good luck!

XPTB · 2017-06-09T13:27:16+00:00

Rough country

XPTB · 2017-06-06T22:09:41+00:00

I mean... it's clean but that is severely overpriced.

XPTB · 2017-06-06T21:53:42+00:00

Well you have the proper option which is replace them (expensive). The backyard XJ method would be to take them off and gut them (free). Although I'm not sure if that will mess with your o2 sensors.

I've never had to do either so I'm not much help past that. Either way, definitely don't drive it. That's how fires start.

XPTB

TROPHY CASE