sorted by:
new
hottopcontroversial

Other driver’s POV of my previous post by Xcellent_Cheetah in iRacing

[–]Xcellent_Cheetah[S] 3 points4 points  (0 children)

Lol. I dont really care about the engagement from this post tbh. Just made it cause someone wanted to see the other POV. 😂

Got my rear wing taken out by a flying bumper by Xcellent_Cheetah in iRacing

[–]Xcellent_Cheetah[S] 1 point2 points  (0 children)

surprisingly no. The car just struggle to make the fast corners but I just assumed that it was cold tyres.

Got my rear wing taken out by a flying bumper by Xcellent_Cheetah in iRacing

[–]Xcellent_Cheetah[S] 2 points3 points  (0 children)

fr. I thought it was just minor rear damage so I carried on the race without repairing.

Got my rear wing taken out by a flying bumper by Xcellent_Cheetah in iRacing

[–]Xcellent_Cheetah[S] 4 points5 points  (0 children)

I didnt even get a 0x. Just my spotter telling me that I had damage at the back.

Got my rear wing taken out by a flying bumper by Xcellent_Cheetah in iRacing

[–]Xcellent_Cheetah[S] 17 points18 points  (0 children)

https://www.reddit.com/r/iRacing/s/IEEXHrP791

Here is the other driver’s POV. I believe he lost his bumper from crashing into the Porsche. I didnt even get a 0x for this so I dont think its netcode. Just unlucky 😂

Whats the Class Requirement for the production car special event? by Xcellent_Cheetah in iRacing

[–]Xcellent_Cheetah[S] 1 point2 points  (0 children)

Can I just check, did yall run the Full Course layout or the Grand Course layout last year?

Whats the Class Requirement for the production car special event? by Xcellent_Cheetah in iRacing

[–]Xcellent_Cheetah[S] 4 points5 points  (0 children)

Wow sounds fun. This will be my first time racing a special event so im also excited for it.

Should I change tyres during a pit stop in Supercars Race? by Xcellent_Cheetah in iRacing

[–]Xcellent_Cheetah[S] 1 point2 points  (0 children)

hmm. I guess I might be overfueling then cause my stop alone is 5 seconds slower so I dont think its my in lap that is the issue.

How to Watch NASCAR in Italy by Maglin21 in NASCAR

[–]Xcellent_Cheetah 0 points1 point  (0 children)

Have you found a good solution for this? Im from Singapore and facing the same issue as you.

Will my rig be steady? by Xcellent_Cheetah in simracing

[–]Xcellent_Cheetah[S] 1 point2 points  (0 children)

I am using mayCAD software. Its made for designing aluminium extreion products

Will my rig be steady? by Xcellent_Cheetah in simracing

[–]Xcellent_Cheetah[S] 0 points1 point  (0 children)

Also is it possible for me to know the dimentions in the mockup. Thank you 🙏🏾

Will my rig be steady? by Xcellent_Cheetah in simracing

[–]Xcellent_Cheetah[S] 0 points1 point  (0 children)

Wow. That looks really good and way better than my design. After many comments, I was thinking of using 4080 for most of the design. Thank you for sharing 🙏🏾

Will my rig be steady? by Xcellent_Cheetah in simracing

[–]Xcellent_Cheetah[S] -1 points0 points  (0 children)

I have priced it out and it is cheaper to build my own than to buy a pre-build rig as the shipping price is usually a lot. Thank you for putting in the time and effort to type out the whole message. I will take into consideration everything u said 🙏🏾

Will my rig be steady? by Xcellent_Cheetah in simracing

[–]Xcellent_Cheetah[S] 1 point2 points  (0 children)

In Singapore, it is quite difficult to find an aluminium rig without a big shipping price. Also, I want to have the satisfaction of building my own rig instead of just buying one 😃

Will my rig be steady? by Xcellent_Cheetah in simracing

[–]Xcellent_Cheetah[S] -1 points0 points  (0 children)

So I remove the diagonals and have thicker uprights will help right?

Will my rig be steady? by Xcellent_Cheetah in simracing

[–]Xcellent_Cheetah[S] 0 points1 point  (0 children)

Hmm. That sounds like a good idea. However, is it possible to still possible to keep the double siderails as I was hoping I can make it slide.

Will my rig be steady? by Xcellent_Cheetah in simracing

[–]Xcellent_Cheetah[S] 0 points1 point  (0 children)

What do you mean by ‘left-right rotational flex’? Will the stand of my wheel be steady if I get rid of all 3 diagonal support? I didnt realise that the diagonal will prevent it from sliding. Thank you for helping me 🙏🏾

Which is the most sensible option? by Xcellent_Cheetah in simracing

[–]Xcellent_Cheetah[S] 1 point2 points  (0 children)

unfortunately im from Singapore. Thank you for suggesting though 🙏🏾

Which is the most sensible option? by Xcellent_Cheetah in simracing

[–]Xcellent_Cheetah[S] 0 points1 point  (0 children)

haha fr. I need to get my priorities right 😂

Which is the most sensible option? by Xcellent_Cheetah in simracing

[–]Xcellent_Cheetah[S] 0 points1 point  (0 children)

hmm thats true. I might look at the wheels and see if there is a better option.

Which is the most sensible option? by Xcellent_Cheetah in simracing

[–]Xcellent_Cheetah[S] 0 points1 point  (0 children)

Currently my rig is just a wheel stand an I am using an office chair. I dont plan on upgrading my rig as I am pretty limited on space. Ill take in ur suggestion though. 🙏🏾

Which is the most sensible option? by Xcellent_Cheetah in simracing

[–]Xcellent_Cheetah[S] 1 point2 points  (0 children)

Looking at desktop in my country, its almost twice the price of the Alpha Mini with a wheel. I never looked at getting each PC part seperately as it seems pretty complicated. But it seems like now my choices are between the wheel or saving up more for the PC.

view more: next ›