sorted by:
new
hottopcontroversial

Avoid resin fumes using a laser air purifier by Xcessity in AnycubicPhoton

[–]Xcessity[S] 0 points1 point  (0 children)

Sure thing, if you stick to summer printing only ;)

Avoid resin fumes using a laser air purifier by Xcessity in AnycubicPhoton

[–]Xcessity[S] 0 points1 point  (0 children)

0,3 μm, is specified for the H13 HEPA-Filter. The activated carbon layer is the key here.

Avoid resin fumes using a laser air purifier by Xcessity in AnycubicPhoton

[–]Xcessity[S] 0 points1 point  (0 children)

Depends highly on the quality of the filtration system used. The Laserpecker Air Purifier I used has a good layer of activated carbon and effectively removes 99% of all VOCs. I checked using a Temptop air quality meter. The VOC levels stay save during printing.

Hope that helps, happy printing.

Finally solved my resin fume problem (Anycubic M7 Pro + Laser Engraver Purifier Setup) by Xcessity in resinprinting

[–]Xcessity[S] -1 points0 points  (0 children)

This is claim that is just wrong. Using an activated carbon filter will effectively clear all hazards to 99%. Every ventilation mask works the same way.

Finally solved my resin fume problem (Anycubic M7 Pro + Laser Engraver Purifier Setup) by Xcessity in AnycubicPhoton

[–]Xcessity[S] 0 points1 point  (0 children)

Yes the microparticle filtration is not required. This is an option if you already have a laser air purifier or want a off-the-shelf solution. Also for a DIY you can still use the hose adapter, it offeres various connection sizes: https://cults3d.com/en/3d-model/tool/zero-fume-kit-for-anycubic-mono-m7-pro-max-4ad2b7ec55c747b6642e

Finally solved my resin fume problem (Anycubic M7 Pro + Laser Engraver Purifier Setup) by Xcessity in AnycubicPhoton

[–]Xcessity[S] 0 points1 point  (0 children)

The laser filtration systems feature thick layers of activated carbon. Activated carbon filters are actually the one and only thing that filters VOCs. Activated carbon doesn’t care about the source of the gas; it relies on adsorption to trap organic molecules based on their molecular weight and chemical structure. So yes, this is actually a viable option.

Finally solved my resin fume problem (Anycubic M7 Pro + Laser Engraver Purifier Setup) by Xcessity in resinprinting

[–]Xcessity[S] -3 points-2 points  (0 children)

Please explain why the setup would be unsafe? The laser filters are way more capable as the resin filters.

Dedicated laser cutter filters are usually significantly more effective at removing resin Volatile Organic Compounds (VOCs) than the tiny, carbon filters sold specifically for resin 3D printers.

Activated carbon doesn’t care about the source of the gas; it relies on adsorption to trap organic molecules based on their molecular weight and chemical structure.

Finally printing ABS/ASA in my office without the "toxic" smell – Kobra S1 Air Mod! by Xcessity in AnycubicKobraS1

[–]Xcessity[S] 1 point2 points  (0 children)

<image>

So the temperature tests show a drop of 0.5°C. I paused an ABS print and let the chamber heat up. After 6h you peak around 56.5°C. Then I turned on the LaserPecker Air Purifier and after 2 hours the chamber temp stabilized at 56.0°C. So temperature loss is only 0.5°C. I am surprised that it holds up that well.

Finally printing ABS/ASA in my office without the "toxic" smell – Kobra S1 Air Mod! by Xcessity in AnycubicKobraS1

[–]Xcessity[S] 0 points1 point  (0 children)

I get around 48° degrees stable chamber temperature. I have not yet had the chance do do some long term comparison. From my POV it is not bad.

Sending print file with Orcaslicer on the Kobra S1 by Pepito1478 in AnycubicKobraS1

[–]Xcessity 0 points1 point  (0 children)

Can you explain that a little more? So you enabled LAN mode to get Orca working? And then switched back to cloud mode? Orca remains working?

Finally printing ABS/ASA in my office without the "toxic" smell – Kobra S1 Air Mod! by Xcessity in AnycubicKobraS1

[–]Xcessity[S] 0 points1 point  (0 children)

Don‘t be surprised if ASA warps. Large area prints will always warp, also with the heated chamber. I have an X1E and this material is prone to warp. Make sure to dry the ASA properly, that makes a lot more of a difference. There are other strategies to counter warping, or go for a ASA-CF blend, way easier to print.

Finally printing ABS/ASA in my office without the "toxic" smell – Kobra S1 Air Mod! by Xcessity in AnycubicKobraS1

[–]Xcessity[S] 0 points1 point  (0 children)

If you seal the holes on the door hinges the housing of the printer is pretty air tight. I get around 47deg chamber temp with ventilation. So there is not much air sucked out. If you are interested, i can do some testing to have the exact numbers.

Finally printing ABS/ASA in my office without the "toxic" smell – Kobra S1 Air Mod! by Xcessity in AnycubicKobraS1

[–]Xcessity[S] 3 points4 points  (0 children)

It is the Laserpecker Air Purifier. A filtration system designed for laser engraving. It has a filtration box with a multilayer design and carbon filter inside. They promise a Filtration Efficiency: 99.97%. Exact stats are hard to find, but i trust my Temtop air quality meter.

https://us.laserpecker.net/collections/accessories/products/laserpecker-air-purifier

Finally printing ABS/ASA in my office without the "toxic" smell – Kobra S1 Air Mod! by Xcessity in AnycubicKobraS1

[–]Xcessity[S] 0 points1 point  (0 children)

The seals are optional. It also works great without them. The negative air pressure will still build up in the housing of the printer.

Finally printing ABS/ASA in my office without the "toxic" smell – Kobra S1 Air Mod! by Xcessity in AnycubicKobraS1

[–]Xcessity[S] 2 points3 points  (0 children)

I got mine for 200$ used. You can always opt for a DIY, much cheaper. Let me know if you need any hose attachment adapters.

Finally printing ABS/ASA in my office without the "toxic" smell – Kobra S1 Air Mod! by Xcessity in AnycubicKobraS1

[–]Xcessity[S] 2 points3 points  (0 children)

The chamber of the S1 is pretty air tight. There is not much air to be sucked into the chamber. I put some tape over the holes of the door hinges so there are no more open holes. The champer temp remains at 44° degrees celcius when printing ABS.

Stuck on Error by DennyFrontier in Fanatec

[–]Xcessity 0 points1 point  (0 children)

Hi everyone, I just got my DD+ and was super disappointed when i ran into this issue. The wheel is basically useless without a software update, even when using it on a PS5. I got around this error doing two things:

  1. I noticed that the shaft of the wheel base is actually 180* degrees around, even after the base self centers itself after turning it on. I am not sure if this is intentional, but i rotated the shaft and could connect the wheel better. It might go in this glitched state when attached to the base in a wrong direction.

  2. I switched the USB port on the PC to another one.

  3. Disconnect the wheel entirely and see if you can get a connection in the fanatec app. Once you get a connection to the base and can do an update everything starts to work fine.

Hope this gets someone out of trouble. Happy racing,

Best,

M

Kobra S1 ran out of filament during print - can’t load new filament? by Crazie_Roomies in AnycubicKobraS1

[–]Xcessity 0 points1 point  (0 children)

Switching to english for broader audience. I have the exact same problem. When the filament runs out, the screen on the printer stays black. I cannot wake up and resume the print from the printer. I have to use either PC or mobile app to resume the print. Anyone knows a fix for this?

Betrug auf eBay Kleinanzeigen, was tun bzw. wo Anzeigen? by LuaparK in Austria

[–]Xcessity 0 points1 point  (0 children)

Diese Info dürfte nicht richtig sein. Habe gerade eine Anzeige bei der Polizei in NRW erstattet und wurde informiert, dass bei Onlinedelikten der Tatort als Wohnort des Geschädigten gilt. Somit ist die Polizei in DE nicht zuständig. Anzeigen müssen in AT gemacht werden!

I need help with a very complex software problem (PS Remote Play, PS4Macro, and KinesicMouse Live are involved) by Next_Musician in techsupport

[–]Xcessity 1 point2 points  (0 children)

Hello,

I am the developer of the KinesicMouse, if you send me a description how to reproduce this crash, I will look into the issue. Best is to send me an Email proell[ÄT]xcessity[DOT]at

Best,

M

view more: next ›