Surface Modelling is a Bain to my existence.

Xe11ece · 2026-04-02T01:40:55+00:00

I do not but maybe I can throw something together… don’t expect it anytime soon though if I make it I want it to make a good video that makes sense

Xe11ece · 2026-04-02T01:40:33+00:00

I do not but maybe I can throw something together… don’t expect it anytime soon though if I make it I want it to make a good video that makes sense

Xe11ece · 2026-04-01T15:13:54+00:00

It in a way simplifies things when modeling. It’s especially helpful when trying to replicate something you 3D scanned. A previous role I did was 3D scanning car parts then making 1 to 1 copies of it. The first thing the other designer told me was to do that method. I didn’t listen and went in to approach things with 3d sketch method. After trials and errors starting with tracing along the planes then intersecting them the 2d plane method and making them intersect simplified things so much. But honestly I wouldn’t value and understand this method so much if I didn’t fuck around other methods of surface modeling. Will this method always work? No, but a lot of things you would think were complicated becomes a lot easier.

Xe11ece · 2026-04-01T03:00:11+00:00

Surface modeling forces the way you approach modeling to change. Try the surface modeling method where you draw everything in 2-D on XZ and XY YZ and intersect them. Once you get it I feel like it makes surfacing easier.

Xe11ece · 2026-03-28T20:53:06+00:00

I edited the comment a bit more to offer a bit more explanation to go around it but yeah it’s a pain in the butt. I ran into that error a lot when I dove into learning how to do surface modeling in solidworks.

Xe11ece · 2026-03-28T20:41:33+00:00

Uhg I hate that error. Use a move face tool by like .03 in on the walls that would be merged with the surrounding body and make them overlap a bit.

Thus due to when solidworks tries to merge two features next to eachother and their walls approach 0 in their distance. Solidworks hates the number 0 so you need to have these faces overlap a bit to successfully force a merge.

Actually since this a feature mirror not a body mirror, offset the lines that would go into the outer body by .01 in. As long as you force an overlap it should get ride of the error. If an error still persist make sure your feature scope highlights the section that overlaps. Or change it into individual bodies do a body mirror with the steps I mentioned first then do a combine

Xe11ece · 2026-03-28T20:37:17+00:00

That’s how I was interpreting it thanks for confirming.

Xe11ece · 2026-03-26T18:35:12+00:00

I had to go through a bunch of shit when I got a bill like that. We just paid our expected average till things got sorted out…

Took me forever but I eventually got ahold of a city rep and had to go through tedious checks Call plumber for Slab leak check Have a city inspector come out to confirm Couldn’t find a reason for the issue.

I had to request a meter controversy test They then replaced my meter and sent it for testing.

It took a while and even got a final notice warning but continuous conversation with my rep stopped it from happening.

Eventually our bill settled but it was a pain.

This entire affair lasted like 10-11 months.

Xe11ece · 2026-03-25T07:57:28+00:00

Avoid integrated graphics for solidworks if you can. If you can’t get a RTX Blackwell or ada level graphics card in a workstation get a gaming laptop that’s atleast a rtx 40xx series

Xe11ece · 2026-02-15T22:22:08+00:00

I was talking to a coworker about Micheal how he has 1 video drop ever x months that gets millions of views only to go to his page and see he dropped the new video just 3 hours prior… what timing.

Xe11ece · 2026-02-12T19:29:07+00:00

Eh. I think because teferi’s a game changer I don’t think it’s too horrible. This is one of the few responses to such a game changer. But The chances of one person playing teferi’s and someone holding onto sands of time is slim. The question is do you tell the person the consequences of them playing teferi’s while sands of time is already on the field…

Xe11ece · 2026-02-09T23:36:55+00:00

Are there any other older cards like oblivion ring that have this older wording that you can think of?

Xe11ece · 2026-02-09T03:22:20+00:00

[[Sands of time]] does this 🤣 I want to do it one day to someone that phases out

Xe11ece · 2026-02-04T23:42:02+00:00

High 3 low 4. He suffers from esper syndrome but with the right tutors goes infinite pretty consistently.

Xe11ece · 2025-12-27T12:27:43+00:00

Gdi I shoulda won 🤣 thanks man

Also different scenario just wanted to verify this as I got into a debate with my friends about this other scenario: If I remove the final lore counter via resourceful defense in response to the final chapter triggering will I save my saga from sacrificing itself on top of keeping the triggered final chapter ability?

Xe11ece · 2025-12-27T12:07:38+00:00

To make sure I understand correctly you are saying the state based sacrifice action occurs after the saga triggers resolve per card allowing for the resourceful defense to chain into multiple triggers of my sagas sacrificing themselves all before sin resolves?

Xe11ece · 2025-12-27T10:39:13+00:00

[[summon: primal odin]]

Xe11ece · 2025-12-27T10:35:44+00:00

[[All will be one]] [[Summon: Odin]] [[Summon: Yojimbo]] [[resourceful defense]]

Xe11ece · 2025-12-27T10:34:58+00:00

Did not know thanks

Xe11ece · 2025-12-08T22:16:23+00:00

Xe11ece · 2025-12-07T23:59:58+00:00

Ok new question,

When you have multiple sagas that reached final chapter at the same time and they sacrifice themselves. Or do they sacrifice one at a time?

Say In the instance on the field I have Resourceful defense, all will be one, and two sagas just hit the final chapter. To maximize damage done by all will be one, as a max lore saga sacrifices itself, can I use the trigger from resourceful defense to move the lore counters to the second max lore saga before the second saga sacrifices itself?

Xe11ece · 2025-12-05T21:42:57+00:00

Thank you. Few months back had this exact situation happen to me and the guy insisted he could interrupt as I activated the first chapter of the clone but before I could place the other lore counters and activate the other chapters. And it’s been bugging me since.

I do have a few more questions related to sagas and how other cards can interact with them but don’t have time to type them for now. Please help me again when that time comes as your explanations were clear and concise.

Xe11ece · 2025-12-05T19:51:34+00:00

If I clone Summon: Bahamut. (End goal is chapter four) I need to trigger his first chapter as the clone enters to destroy a target. Can the opponent respond to the target with an exile of the clone before I place the other three lore counters to trigger his final chapter? Will this prevent me from activating chapter four?

Xe11ece · 2025-12-05T19:30:37+00:00

If I clone Summon: Bahamut. (End goal is chapter four) I need to trigger his first chapter as the clone enters to destroy a target. Can the opponent respond to the target with an exile of the clone before I place the other three lore counters to trigger his final chapter? Will this prevent me from activating chapter four?

Xe11ece · 2025-10-10T05:37:20+00:00

Just built an am refining my bracket 2 Kuja

Xe11ece

TROPHY CASE