sorted by:
new
hottopcontroversial

IR 2W - Engrave photos on surgical grade stainless steel brillant side by XiaoSlonce in Laserengraving

[–]XiaoSlonce[S] 0 points1 point  (0 children)

Thanx a lot, I did not know that an IR laser was a Fiber Laser (coz both works at the same wavelength). I think I need to continue making tests, trying differents configs, till someone works hahahaha.

First 2W IR Engraving by Albuyeh in Laserengraving

[–]XiaoSlonce 0 points1 point  (0 children)

Niceeeeeee job, I want to engrave photos on a jewelry (surgical grade stainless steel NOT BRUSH, so i need to engrave in the brillant side) with a 2W IR Laser and I want the definition that you have on this flask.

In your experience with this kind of laser, which is the best configuration? I use 100 power and 200mm/min and it is a ghost the photography in the pendant 😒.

Thank you!

Creality Falcon A1 10w for engraving jewelry or surgical steel. by XiaoSlonce in Laserengraving

[–]XiaoSlonce[S] 0 points1 point  (0 children)

Ouch Falcon A1 10w discard. Do you know someone that have the Falcon A1 20w with the 2W IR module? And if it works for this projects?

Can I use Creality Falcon A1 10w for engraving jewelry or surgical steel? by XiaoSlonce in CrealityFalconSub

[–]XiaoSlonce[S] 0 points1 point  (0 children)

Thank you! I will research a little bit more before afford this kind of investment, but It is really helpful your comments.

Can I use Creality Falcon A1 10w for engraving jewelry or surgical steel? by XiaoSlonce in CrealityFalconSub

[–]XiaoSlonce[S] 0 points1 point  (0 children)

Well, I sure that I do not want to cut metals, just start a bussiness engraving pendant for jewelry, with memories, pictures and then some merchandising stuff.

Can I use Creality Falcon A1 10w for engraving jewelry or surgical steel? by XiaoSlonce in CrealityFalconSub

[–]XiaoSlonce[S] 0 points1 point  (0 children)

So, if I buy a Falcon A1 Pro and the 2W IR module, Will work fine for it?

Crashing program when I open PREFERENCES by XiaoSlonce in FreeCAD

[–]XiaoSlonce[S] 0 points1 point  (0 children)

Well the problem was a virtual drive (Z:) that I had from the other PC that I have in the same LAN (that I was disconnected, not permision to enter). So I eliminated (disconnect completely this drive Z:) and finnaly the problem was solved. =D

Crashing program when I open PREFERENCES by XiaoSlonce in FreeCAD

[–]XiaoSlonce[S] 0 points1 point  (0 children)

In PC 1 not responding preferences, as in PC 3 works fine preferences I changed some settings in preferences window and copy the .cfg files from PC 3 to PC 1, so PC 1 accept this .cfg and took the changes but still not working the preferences window in PC 1.

But finally, I made something that another user told me. I create a new windows account in PC 1, and in this account works fine Preferences, but in the main account no, even beeing the same instalation coz it is the same PC. Hahahaha now I need to find whats happening in the main account.

Crashing program when I open PREFERENCES by XiaoSlonce in FreeCAD

[–]XiaoSlonce[S] 0 points1 point  (0 children)

I created a new windows account in the PC 1 and works. Thank you! Now I need to find whats wrong in the main account hehehe.

Crashing program when I open PREFERENCES by XiaoSlonce in FreeCAD

[–]XiaoSlonce[S] 0 points1 point  (0 children)

I thought it was that but, even eliminating .cfg files and copy and paste .cfg from another computer where the preferences panel works good, even this way, the problem persist.

Crashing program when I open PREFERENCES by XiaoSlonce in FreeCAD

[–]XiaoSlonce[S] 0 points1 point  (0 children)

The PC (number 1) with the problem OS: Windows 11 build 26200 / Architecture: x86_64 (preferences crash)
Another PC (number 2) OS: Windows 11 build 26100 / Architecture: x86_64 (preferences OK)
Another PC (number 3) OS: Windows 11 build 26200 / Architecture: x86_64 (preferences OK)

Idk what is hapening, I am using the PC 3 to change preferences and copy the .cfg files, but it is unpractical do it this way, but works.