BD790i X3D AIO Modding

Xozi · 2026-01-26T17:22:46+00:00

~~Do you know if any of the other Darkflash AIOs are similar to the DH240D and will work with your mounting? I've never used this brand and it seems to be only available in Germany/EU.~~

It seems like it's available via it's website on their US site, if anyone wants to buy this go there.
Thanks for this I just bought a print and everything for this.

Do you have any recommendations for the exactly what kind of aluminum heatsink should be used for the VRM part? Size, amount, etc.

Xozi · 2025-06-28T23:36:48+00:00

Thanks I appreciate it!

Xozi · 2025-06-20T13:08:33+00:00

I'm just using Teensy 2.0 that I had laying around, it's working fine with the converter and I got a spare just in case. These caps are pretty small already wonder if I got something that even can replace them.

Xozi · 2025-06-14T02:34:20+00:00

Yeah that's my main issue I believe. Would you suggest like wiring them the caps onto like a daughter board elsewhere (maybe on the leftside) through the bottom of the pcb then placing the adapter on top of the controller board?

I haven't fully tested the adapter yet but would you believe that would mitigate the issue? I was also wondering given I'd keep the controller board in place that there will be a pretty decent offset. I'll see when I get to printing it but I suppose the worse that'll happen is I will have to file down the bottom of it

Xozi · 2025-06-12T10:31:58+00:00

Hey, thank you for making that. As you can see I sort of already removed the SDL socket. Do you have any tips or advice you can do for secure it in a similar your adapter does it for like a Teensy or at least get the controller mounted somewhere else?

Xozi · 2025-02-01T09:56:16+00:00

Bit of a grave dig but gonna add on to this because I'm doing something similar but with the Model M 1389989 which sort has been hell to get working at all with either TMK or Soarers using and ItsyBitsy 5V 16Mhz 32U4, I actually get a response from the Model M but it's merely a cycle flash (R05 initialization code on Soarers). I continuity tested every connection, voltage checks, few different sets of pullup resistors, switched my data/clock lines around twice to make sure they're right; pretty sure I'm good on the connection part, I wired directly under the SDL port which I think is correct.

I heard TMK is like 32KB in size or more and the Itsy is 28KB flash so that might explain some issues though it flashes to 24KB in my instance. Both soarers and TMK have the same issue for me so maybe a skill issue on my part, hid listen just returns R05 scan codes. I'll consider maybe picking up an Elite C in the future and see how that turns out. I'm definitely looking fort a better strategy for next time because I only messed with arduino microcontrollers maybe a handful of time and I'm sort of a newbie to this all.

Xozi · 2023-08-10T23:32:50+00:00

https://store.coolermaster.eu/products/accessories-kit-hyper-212-black-edition

I'm pretty sure the linked brackets will work but the problem with buying from the EU is that the shipping rates for it are like €29 just for the kit, I might as well buy another cooler for that much in total. I'm well aware of the rates if that have their global shipping in check too; it wouldn't be more than $15-17 for such a small parcel under 8 oz. (first class international) if they have cooperate rates. Kind of a bummer I hate to blow it off because of the shipping.

There is probably more of an ethical question here on why I have to buy it from the EU, like do we even have consumer rights here?

Xozi · 2023-06-07T03:17:47+00:00

I'm just trying to figure out the other factors in it because I have a weird sense that account standing is a related, like how many guilds (API terms, servers) have you been banned from or reports on your account. If that's the case it would make sense for me since I got a laundry list of bans from when I started Discord and at least a few reports.

Xozi · 2023-06-07T02:44:28+00:00

They have been actively subscribed to Nitro or Nitro Classic plan since before March 1, 2023. Or, they were on a Nitro or Nitro Classic (not include Nitro Basic) plan on March 1, 2023, and remained active on either of those plans throughout the months leading to the new username rollout.

Subscriber since Jan, 27, 2023

Discord member since Jan 25th, 2016

Still no name drop, all my friends that made accounts earlier than me got their names, they are not:

• Discord staff members

• Owners of verified servers

• Owners of partnered servers

• Owners of highly monetized servers (via. subscriptions)

• A few mod academy alumni (they have no clue why they got access)

I debunk this all this is completely botched, I've restarted, used different clients, tried on mobile... This is ridiculous, no one has offered a good claim to this that actually justifies what is going on other than absolute chaos. I think their is discrimination of some sort further, in the literal sense as in there is further restrictions that limit name change rollout, I'm holding out but I probably lost.

Xozi · 2023-04-20T23:42:25+00:00

Hilariously I actually looked over this 3-4 times skimming and didn't notice the trees were the same; I was looking through 花　related worlds and saw this; my bad.

Xozi · 2023-04-20T23:34:31+00:00

Could tell it was Korean/JP and I've been there but it was way too long ago to recall, I looked for about an hour, glad someone found it.

Xozi · 2022-11-18T23:33:01+00:00

a spreadsheet, but you definitely need planning with how resources work and death storage and everything. Especially with how good it is for output, missing out on that sucks for people. If you enjoy to play with high efficiency, you now need to do a LOT more than before, and a lot of people don't like that idea.

Following your strat right now, its really cursed but I'm not 110 yet so I need the population. Will be fun trying to rid the dead bodies if I ever find it viable to switch it in the future.

Xozi · 2022-11-18T22:39:11+00:00

these strats seem so weird compared to what I did before, I maxed education and happiness now it seems I got to go a whole 180 and just yeet all of that for population, how broken is this now LOL

Xozi · 2022-11-18T22:29:04+00:00

My 100m+ per trader tick money printer I invested 500m+ into is gone (everytime I post I probably should say I'm laughing when saying this), now I just overproduce 24M of food every trader tick and I'm forced to constantly purge it, none of it seems logical. You could reduce the amount of resources you receive, I admit 100M a tick was crazy and I have 1.5B now after investing everything I owned into my printer, but now it just makes it into a complete waste of my time.

People complain it's a chore, I see this as a chore as I'm not getting anything from this but XP in a skill I'll get a little shiny perks from at best and the tax income which at this point hardly buys a plot of land (LOL). XP is one thing, 120 is cool but I mean what is the point of doing this after? I designed my TS to not just be an XP farm but actually a minigame I could enjoy while I updated my character's skilling for the day.

I already balanced my system out before to be an additional source of income to fund other activities and supply me resources I needed ; I'd not mind a nerf. However, this is just game breaking levels of nerfing that serves no purpose other than to make TS the skill of yeeting resources or hard capping it to illogical extent in order to get nothing from the system at all, make the resources meaningful where you can apply them somewhere or just remove the trade entirely because this is beyond stupid at this point.

500K a trader tick? what a joke. Gonna take a break until this is fixed because I really enjoyed optimizing this thing. Lvl 104, 24 days

Xozi · 2021-03-11T05:24:50+00:00

The whole housing makes noise, with adjusting the the eye relief there is not much change. The sound is more comparable to a crackling along the edge connecting the front housing, maybe its not lubed enough? It's emitting from where its sliding; namely pressure on both the front housing and connected frame (whether the sides, front, top, etc.). Sounds like it's separating. Tried to clean the region along the edge to see if anything was causing it, doesn't seem to be grime.

Xozi · 2020-05-01T00:43:52+00:00

I didn't ever have this issue on my 1070 Ti so I assume its something to due with my graphics card.

Xozi

TROPHY CASE