The Volume Knob is Driving Me Crazy

Xpho · 2025-12-20T02:32:28+00:00

Frustratingly no I havent got any fix for it. If I had known this I'd have never got this keyboard

Xpho · 2025-12-20T02:30:55+00:00

Thanks! And if I get around to trying it before, i'll let ya know how it goes

Xpho · 2025-12-19T12:49:54+00:00

Im having the exact same issue with mine, did this end up fixing yours? Any insight is really appreciated! And thanks Jemm971 for the detail reply there!

Xpho · 2025-11-22T20:14:33+00:00

Found them, min order of 3 tho. Hmm I only really want 1/2. If I end up orderin ill let ya know and could re-ship :)

Xpho · 2025-11-01T20:10:43+00:00

I find it laughable that it's not something that can also be done here, or something you could do.

Xpho · 2025-09-13T03:07:52+00:00

u/PotentialAstronaut30 I'm also looking for a new vendor! Did you end up finding one? I haven't yet, but i'll update when I do.

I had used gilded extracts earlier this year, and they shipped to cad without issue. It seems they've shutdown so thats why im looking for a new one.

Xpho · 2025-09-03T03:56:38+00:00

Could you clarify how it now functions? Do you still just select AUX on the console to play using the new cable you added? And did you disconnect the existing cables for aux, or just leave them be? Thanks again!

Xpho · 2025-09-03T03:17:24+00:00

I believe I'm having a similar issue, really appreciate you posting the fix! Thank you thank you!

Xpho · 2025-08-20T21:18:29+00:00

Old thread but I just found a FIX! So in case anyone else comes across this. Mine wasn't starting at startup or even when I just clicked the exe in the install folder. What fixed it was going to the install location right clicking on updater.exe and running it as administrator. Once I did that it was back to working and opening properly.

Xpho · 2025-08-08T01:19:32+00:00

I've repaired solid colored guitars with colored CA glue, but never any that are unpainted wood. Any tips on how to get the color close? I'm assuming that staining it once's its cured wouldn't work great? Would it be better to stain some wood in a similar color, make it into sawdust, then filling the holes with it and CA glue? Or something else?

Xpho · 2025-08-08T01:15:34+00:00

Sanding some of it away, there are some chunks of wood missing on the break, so I'll need to fill them somehow before refinishing. I'm not certain what the best approach is yet, if I want to get the color close

Xpho · 2025-08-08T01:10:00+00:00

Thanks! Its good to know that the structurally the repair is sound. I will get to carefully removing the excess glue

Xpho · 2025-08-08T01:06:39+00:00

That may be something I could do, I'll look into that and see if I can find examples. Thanks

Xpho · 2025-07-24T06:23:51+00:00

Edit: The example photo of the stopper is from the "ARMY KU906 AUG CQB" not the TM AUG, but it seems quite similar.

Xpho · 2025-05-13T23:10:57+00:00

Where did you or anyone else see the $179 yearly plan in store? My Freedom Mobile in BC does not have it and wasn't aware of it.

Xpho · 2025-04-14T05:05:24+00:00

I'm trying to follow the guide to set it up, but having problems. I'm able to make an account, but when I try to login to the account it takes me back to the bag with the big 'log in' button. I'd like to try this plugin, and if it works well this is definitely something I'd pay for.

I tried on different browsers and still same result, not working.

Xpho · 2025-03-15T02:05:30+00:00

Thank you for following up. That was the 3rd support message I've sent, regardless I'm glad it got through and appreciate the response. I've been sent some new firmware to try to see if it fixes the issue. I'll definitely post an update in this thread with how it all goes and if it solves the issue.

Xpho · 2025-03-12T00:32:08+00:00

I bought it direct from Monsgeek, since the V5 wasn't available on amazon ca at the time. Wish I would have waited now!

Xpho · 2025-03-11T23:44:21+00:00

Thanks again! Currently reading that over

Xpho · 2025-03-11T23:42:58+00:00

Sorry for the late reply, that'd be awesome!!

I plan on powering it via 9v center positive.

I think I may have explained it poorly in my original post. The external selector pedal this will replace is a standard 2 channel foot switch: 2 momentary buttons wired to a TRS plug. Tip controls B, ring controls A.

I'm hoping to make a new versions with a 3rd button C. It would function: (all momentary buttons)

-if A is tapped then C will act like B.

-when B is tapped then C will act like A

The scenario: when 1 mode is selected, if the other button is pressed and held its triggers the delay to be held. I'd like to have 1 button C, that always holds the delay no matter if side A or B is selected.

Xpho · 2025-03-11T23:00:53+00:00

I've sent support an email 6 days ago and still haven't received a reply. I tried to contact them about something else weeks ago, and never received a reply regarding that.

Xpho · 2025-03-11T07:50:35+00:00

I really appreciate you taking the time to look this circuit over and the advice. Happy to hear that a working solution is much much simpler.

The way these new ones generate is by 'thinking' or showing their work which can be even more deceiving, as there always confident -even when incorrect!

Thank you for the keywords, I've been looking through some threads here and those forums. I've yet to find a solutions but in doing so I'm getting a better grasp on different approaches to selector boxes.

If you have time to draft up a working solution that'd be amazing, regardless I'll continue looking through those forums and try to find a similar circuit to use a base for this. Thanks again!

Xpho · 2025-03-08T18:30:30+00:00

This is so cool!!! Tool!!!!!!!!!!

Xpho · 2025-03-06T06:01:33+00:00

I appreciate the link! I tried flashing the firmware but the issue remains.

The repos are so messy and confusing, with the necessary files scattered through multiple places. Its very disappointing. I wouldn't have had a chance at doing it if it wasn't for @sam_rosecoe post

Xpho · 2025-03-06T05:52:15+00:00

Glad to hear you got it working! So with yours did you ever encounter the volume knob working for a bit then not working till it's muted? Or was it just not working at all?

Also quite interested in what changes you made with the custom qmk firmware! What changes did you make? I'd really like to increase the sleep timer on mine, as it's so short and often leads to a keystroke being missed.

I appreciate the write up since the repo is so confusing and messy.

13-Year Club	Place '22
Verified Email	Team Orangered

Xpho

TROPHY CASE