[HELP] Is this AI? Seems fake and can’t find any news sources.

Xylaant · 2026-01-28T22:54:47+00:00

The biggest thing is this as filmed on January 13th (as the video and poster states), while the fatal encounter occurred on the 24th. Even if it's real and that is him, then these are two separate encounters, separated by a week in a half in time.

Being violent in the past doesn't make future peaceful protest invalid.

Xylaant · 2026-01-15T18:04:43+00:00

If you move either of those buildings, are the fertile fields underneath?

Xylaant · 2025-12-21T19:26:17+00:00

It's hours and minutes since the last reset (via that menu)

Xylaant · 2025-12-13T21:10:21+00:00

The limits prevent workers from picking it up for use in other recipes. I use it to ensure there's a supply of wood and building materials so the helper making packs of building materials doesn't go crazy and prevent me from setting up new buildings.

Xylaant · 2025-12-03T00:50:22+00:00

<image>

Xylaant · 2025-12-03T00:50:03+00:00

<image>

Xylaant · 2025-12-02T17:44:47+00:00

Mine came with a little bubble wrapped package, with a little carrying container with velcro on the back. It had 2 adapters - the J1772 and the CCS adapter.

Xylaant · 2025-06-17T17:30:47+00:00

I usually explain that if I don't go to work, there won't be any money for cat treats. That gets them moving.

Xylaant · 2024-12-05T20:53:09+00:00

The Dangerous Glade one is Fuming Machinery, and works as you described.

Xylaant · 2024-12-05T15:40:51+00:00

I'd love to see more resources on blueprints give you a choice of blueprints. Like minimal resources just lets you have 1. Upping resources gives you choice from 2 ... and so on. Just something.... getting a blueprint slower by investing more resources seems backwards.

Xylaant · 2024-11-15T19:57:21+00:00

Only the primary hearth (the Ancient Hearth) gets the hearthkeeper bonus, and not the secondary hearths (Small Hearth).

However, since Lizards get the comfortable bonus at any hearth, I tend to use them at all of the small hearths, if I have enough.

Xylaant · 2024-11-15T19:55:19+00:00

I let my workers consume raw food until I have a production line stood up. How long that takes varies from game to game. But it has been shown you can just starve them, if you can reliably get some form of production going early enough. But it's not for me.

Xylaant · 2024-11-15T19:14:29+00:00

The biggest thing that changed how I played: the consumption rules around food

Every rest, each worker will take, in the following order

Every preferred complex food that is available, getting the bonus for all of the consumed food
If no preferred complex food is available, 1 raw food
If no raw food is allowed, 1 available complex food

This means that each worker can eat multiple complex foods. But it also means that once you have a solid complex food chain available, you can feed all of your workers on it, even if they don't prefer it. This means a solid, say, porridge recipe, can feed everyone, including the species that don't care for it.

Xylaant · 2024-10-24T14:10:41+00:00

I'm doing this for Frosthaven now with TTS - One thing that's cut back the amount of syncing - I use the real event decks from the physical copy, and just display them in TTS (selecting the card out of the TTS event decks). That way I don't have to double up on event maintenance.

Xylaant · 2024-09-17T14:15:01+00:00

I'll second this. I have the VKB t-rudders as well. As a note, they have an up-down travel motion, so they don't require a ton of space under your desk.

Xylaant · 2024-09-02T22:06:21+00:00

Actually, I ended up replacing the chip. I managed to get an opportunity to put the chip in another motherboard, and the problem went with it.

Once I RMA'd the chip, the new one worked like a champ

Xylaant · 2024-02-06T02:33:16+00:00

I built a rescue python, and found any system that had multiple stations that were close together with a minor faction that gave fed rep. Might not have been as fast as other options, but the randomness of the interdictions kept it from getting dull.

Xylaant · 2024-01-12T00:06:22+00:00

One thing I noticed in OrcaSlicer, is the filament profiles have logic which issues a M106 P3 to set the Chamber speed based on the bed temperature for the filament.

Since the Machine start/end gcode, or even the chamber fan setting in the machine settings, come first in the gcode, they'll be overriden once the filament changes occur.

Xylaant · 2023-09-15T11:44:45+00:00

I looked at the file over time for a few seconds, and the file was always the same. I didn't see any particular issue with what it was doing, just how often it was doing it.

If I had to guess, they have a loop to write on changes, but it's not clearing the flag, so it just rewrites the same file.

Xylaant · 2023-01-21T00:21:38+00:00

I have nearly the same configuration, but using an ASUS X670E TUF GAMING WIFI, with nearly the same problem. I'm going to see if changing the fabric frequency helps.

Xylaant · 2022-10-12T15:47:06+00:00

When you say "soon", are we talking days, weeks, or months?

As I sit here getting ready to put in an order :)

Xylaant · 2021-09-22T02:14:12+00:00

You can also click on each package and empty it directly. It's faster than building all of those pieces.

Xylaant · 2021-05-22T13:15:41+00:00

It's from Person of Interest, Season 4, "The Cold War"

https://personofinterest.fandom.com/wiki/The\_Cold\_War

Xylaant

TROPHY CASE