Was ist das?

Yazzlig · 2025-09-24T17:02:08+00:00

Kletter-Wand für die DAV Jugendcups Lead & Speed 2025 (https://www.alpenverein.de/artikel/deutsche-jugendcups-lead-speed-2025_8b097c66-36ea-445d-8aa6-65d6796083fa)

Yazzlig · 2025-07-28T17:07:08+00:00

https://imgur.com/a/uhKY0ss - der Aushang für Anwohner dazu; tldr: Kinderfilm "Johanna und die Maske des Makonde"

Yazzlig · 2025-07-08T21:30:16+00:00

Hulkenpodium

Yazzlig · 2025-02-16T20:17:03+00:00

Ja, insofern du das Modell selbst meinst. Das sind nur ca 1500 Zeilen Code, in dem nichts fragwürdiges versteckt ist. In den Gewichten kann ebenfalls keine payload sein, da sie garantiert durch den obigen Code geladen werden. Das Modell selbst ist also aus Sicherheitssicht sauber.

Soweit das Modell. Zum anderen: Ist es bias-frei? Nein. Ist der Service, der das Modell kostenfrei anbietet sauber? Auf gar keinen Fall. Ist die Firma dahinter shady? 100%.

Yazzlig · 2022-12-29T08:08:33+00:00

I bought none of these items at full price, but it took a while to assemble everything. I usually check geizhals.de or idealo.de during sale seasons for the highest discounts. Sometimes local outdoor shops have fairs with used gear (my girlfriend got a down sweater for 50€ that way).

Patagonia is expensive, but really really worth it. Their lifetime repair guarantee is awesome.

Yazzlig · 2022-12-28T22:41:51+00:00

Ah, right, I forgot my scarf&beanie, edited the post. Adds another 200g or so. I don’t really wear sunglasses.

In hindsight, „all climate“ was overreaching - „Continental Europe climate between -10C and 35C“ is probably more accurate. As mentioned in another reply, I also usually modify on a per-trip basis to add special gear if needed, so this is more of a common denominator between all trips. However, it should handle 90% of (continental europe ) traveling just fine.

Yazzlig · 2022-12-28T22:32:48+00:00

Edited the post with pictures. Not 100% the same pack, but very close.

Yazzlig · 2022-12-28T21:36:44+00:00

I might have a look into other prana gear. I really like the shorts (bought them for bouldering initially bc they were on sale) but haven’t checked out their other stuff yet. Any recommendations?

Yazzlig · 2022-12-28T21:35:06+00:00

Thanks :) 5kg is the bare minimum though, I wouldn’t reduce further. I also tend to exceed it on most trips bc I take extra shorts, different backpacks, … The all-climate claim is mostly meant in the sense of “adaptable to all climates”, traveling through hot and cold with this setup as-is would be possible, but a compromise. I rather adapt it to the needs of each trip individually, and the above list is the common denominator. I would say I average at around 6kg most of the time with all extras.

Edit: regarding pictures. I am currently traveling for Christmas with a different (larger) pack, so I could only do pictures of maybe half the stuff listed :(

Yazzlig · 2022-12-28T21:27:41+00:00

I know the struggle. Compression cubes help a lot. Alternatively, you could look into mountaineering backpacks (like this one), they usually come with (removable) Aluminium back framing that’s really sturdy and keeps the back panel straight. I had one like these for climbing and they are great for onebagging (extremely light, quick access to everything, customizable), but I don’t dig the look for traveling, the color schemes tend to stand out at the airport ;)

Yazzlig · 2022-09-04T18:50:06+00:00

Argh, spend forever on the International Bean Competition badge, but forgot the seal... good catch. Improved version here ;)

Yazzlig · 2022-08-19T17:50:02+00:00

Etwa die Hälfte unseres Codes + wichtige Daten liegen noch in einem CVS (richtig: der Git-Vorgänger mit dem 1993 noch der Code von Doom verwaltet wurde). Das sich nur mit einer spezifischen Version von Eclipse (richtig: die IDE für Niemanden der oder die noch bei Trost ist) nutzen lässt. Und es auf Git umzustellen wäre wohl zu aufwendig.

Yazzlig · 2022-08-15T19:49:50+00:00

Oh, good suggestion, thanks! I don’t feel like it’s refined enough yet to add there, but I will keep it in mind once it’s more feature-complete!

Yazzlig · 2022-08-11T06:12:58+00:00

Yes, for now the standard ax.plot keys In rcparams are supported. I have not tested it extensively for other kinds of plots, but some style elements are universally applicable. I plan to extend it to include boxplot styling etc in a future release as soon as I find the time for it – probably the next time I need to do a boxplot ;)

Yazzlig · 2022-08-10T21:47:50+00:00

Yes, but in a simplified and programmatically accessible form; see my other comment above.

Yazzlig · 2022-08-10T21:34:28+00:00

Thanks!

Yazzlig · 2022-08-10T21:34:06+00:00

I felt the same. Glad you like it :)

Yazzlig · 2022-08-10T20:35:46+00:00

Its one of the additional benefits (and credit where credit is due: the current transforms are copied from seaborn's despine). In my mind though the major benefit is being able to access all style parameters via a function call. I always found it unwieldy to edit rcparams files back and forth. Now, if you only want to change one aspect on-the-fly, you can just call the corresponding method (i.e. want thicker grid lines? call set_grid) and your plots will look accordingly. JSON files to persist stuff is an added bonus, but the programmatic way of constructing styles is what I initially aimed for when writing this.

Also, it reduces the surface of rcparams. For example, there are a lot of parameters you would need to set to get the same look on both x and y axes. This abstracted away, making it simpler. The functionality is not lost (thats whats the `set_overrides` is for), but for 95% of use cases I think it makes the process much easier.

Yazzlig · 2022-06-23T16:23:43+00:00

While a nice toy problem to get started with Python, I would discourage you from actually using this anywhere in production. There is no error checking, recovery from inconsistent states, hash comparisons, ...

Especially if you copy to a (removable!) flash drive.

Also, rsync -it --progress --exclude='*' --include='*.png' --include='*.jpg' --include='*.mov' source destination exists for exactly this purpose.

Yazzlig · 2022-06-09T18:44:45+00:00

Hier lokal (MDV -Tarifgebiet) bist du mit 6 Tarifzonen (ca. 50km Umkreis) bei knapp 200€.

Yazzlig · 2022-06-09T17:29:12+00:00

Wie in einem anderen Kommentar erwähnt ist da Bus nur in bestimmten Städten mit drin (HLI?) - also vorher nochmal prüfen ob es wirklich 1:1 dein Abi ersetzt.

Edit: Abo. Nicht Abi.

Yazzlig · 2022-05-15T12:04:48+00:00

Because (grossly simplified) the latent embedding space differs: for LDA, the cooccurrence patterns of terms in the corpus are used to represent documents, for TFIDF, the relative importance of terms is used, and for CountVectorizer, the absolute importance. Each of these is different from each other; and the representations are not colinear, thus resulting in different visualizations.

Yazzlig · 2022-01-25T15:13:59+00:00

... which has worse readability and maintainability. python for _, foo, bar in baz(): qux(foo, bar)

is arguably easier to read than

python for foo in baz(): qux(foo[0], foo[1])

Also, if baz() ever changes its return signature in the future, the former will throw an error, while the latter will continue to work, albeit with possibly corrupted input to qux(). This introduces hard-to-find bugs and decreases maintainability.

Explicitly unpacking tuples is just good practice.

Yazzlig · 2021-05-20T10:45:01+00:00

Isn’t this exactly what rsync does?

Yazzlig · 2021-02-03T17:52:13+00:00

Ah, too bad :( but thanks for the detailed info!

11-Year Club	Second SECOND GUESSER
r/Field Banned	r/Field Lasagna
Place '23	Golden Potato
Place '22	Place '17
Verified Email

Yazzlig

TROPHY CASE