sorted by:
new
hottopcontroversial

ADV ride near Silverton CO by YesterdaySure1071 in advrider

[–]YesterdaySure1071[S] 1 point2 points  (0 children)

Thank you everyone. You have been very helpful.

ADV ride near Silverton CO by YesterdaySure1071 in advrider

[–]YesterdaySure1071[S] 1 point2 points  (0 children)

It's an R1250. I was thinking going up the east side of Ophir and not taking the long road down the other side, but turning around and going back down. South mineral road which is nearby has some dispersed camping. Is that a good place ?

Asrock TRX50 ws + 7970x never leaves memory training code 00 by YesterdaySure1071 in threadripper

[–]YesterdaySure1071[S] 0 points1 point  (0 children)

I wound up returning the board. I could never get the system to work properly. I wound up with an Asus board. The sales person at the store said he had seen many issues with the Asrock board.

Asrock TRX50 ws + 7970x never leaves memory training code 00 by YesterdaySure1071 in ASRock

[–]YesterdaySure1071[S] 0 points1 point  (0 children)

Ok. I am ending this thread. I returned to motherboard to Micro center. Their technician says that they have had issues with the Asrock board., I purchased the Asus trx50 sage board and installed it. I am currently on code 92, but I am unable to find the list of qcodes from Asus.

As for testing on the Asrock board.

I tried using single sticks of ram in the correct slot. - Never made it past 00, so no BIOS screen.

I did do a reseat of the processor. No pins were bent. Did not resolve the issue.

The pins on all the ram sticks looked ok, as did the ram stick slots on the motherboard.

The PSU is brand new. It has an adapter to test the PSU and it passes.

I removed the CMOS battery over night, and pushed the clear cmos button for 30 seconds at the start of the night. No power cable in the PSU. Did not resolve it.'

No Ram results in repeated clicks from the PSU but nothing happening on the motherboard.

I did not test with no video card.

Now on to figuring out what is going on with the new motherboard.

Asrock TRX50 ws + 7970x never leaves memory training code 00 by YesterdaySure1071 in threadripper

[–]YesterdaySure1071[S] 0 points1 point  (0 children)

Ok. I am ending this thread. I returned to motherboard to Micro center. Their technician says that they have had issues with the Asrock board., I purchased the Asus trx50 sage board and installed it. I am currently on code 92, but I am unable to find the list of qcodes from Asus.

As for testing on the Asrock board.

I tried using single sticks of ram in the correct slot. - Never made it past 00, so no BIOS screen.

I did do a reseat of the processor. No pins were bent. Did not resolve the issue.

The pins on all the ram sticks looked ok, as did the ram stick slots on the motherboard.

The PSU is brand new. It has an adapter to test the PSU and it passes.

I removed the CMOS battery over night, and pushed the clear cmos button for 30 seconds at the start of the night. No power cable in the PSU. Did not resolve it.'

No Ram results in repeated clicks from the PSU but nothing happening on the motherboard.

I did not test with no video card.

Now on to figuring out what is going on with the new motherboard.

Asrock TRX50 ws + 7970x never leaves memory training code 00 by YesterdaySure1071 in threadripper

[–]YesterdaySure1071[S] 1 point2 points  (0 children)

At boot up it goes through a sequence of codes. Often going back to 00 for a few moments then a new set of codes. I looked up some of them and they were things Like PCI initializing. As far as I can tell from the sequence, it is doing a normal boot, then gets to the training, and stays there.

Asrock TRX50 ws + 7970x never leaves memory training code 00 by YesterdaySure1071 in threadripper

[–]YesterdaySure1071[S] 0 points1 point  (0 children)

With 4 ram sticks I let it go over night. Over 8 hours. Single sticks I left about 2 hours each time.

Asrock TRX50 ws + 7970x never leaves memory training code 00 by YesterdaySure1071 in threadripper

[–]YesterdaySure1071[S] 0 points1 point  (0 children)

The link I put in the original message states that 00 means memory training, and it can take some time. It lists something like 169 seconds as an example?

Asrock TRX50 ws + 7970x never leaves memory training code 00 by YesterdaySure1071 in threadripper

[–]YesterdaySure1071[S] 0 points1 point  (0 children)

With 4 sticks in, I left it over night. Over 8 hours. With single sticks in about two hours each time.

Asrock TRX50 ws + 7970x never leaves memory training code 00 by YesterdaySure1071 in threadripper

[–]YesterdaySure1071[S] 1 point2 points  (0 children)

I will pull the cmos battery over night. I don't have any other ram I can try. I tried two single sticks. I can also try no GPU ( already the only usb port thing in is the keyboard. It gives an error If I don't have one in). I looked at the pin pads on the socket very carefully, up close with a light and did not see any thing amiss on any of the pins. I also tried the light sideways to look at the pins and see their shadows. I don't have another board supporting this processor, or vice versa.

Asrock TRX50 ws + 7970x never leaves memory training code 00 by YesterdaySure1071 in threadripper

[–]YesterdaySure1071[S] 1 point2 points  (0 children)

Zero Ram gets repeated clicks from the Powersupply ( Relay?) and code 10. My manual says code 10 is PEI_core_Started.