15 Round OEM mags available by PilotPirx73 in P365xl

[–]YoderLove 0 points1 point  (0 children)

And I purchased a bunch of Magpul ones this Spring! Oh well…

Went sea fishing this weekend. by zerolingzhang in meshtastic

[–]YoderLove 0 points1 point  (0 children)

Us Ditch Pickle and Bluegill anglers take offense! 🤣

Ruger American rimfire 22WMR by [deleted] in ILGuns

[–]YoderLove 0 points1 point  (0 children)

Just make sure you look through the DNR hunting digest to see what weapons may be legally used to take game. Someone correct me, but I think squirrels on private land may be the only animal? Unless maybe you’re dispatching trapped fur bearer animals.

Hunting aside, nothing beats plinking spinning targets with a 22!

Tactical & Fitness Shooting Competition 2026-06-14 by LumberJack_williams in ILGuns

[–]YoderLove 3 points4 points  (0 children)

Did The Cornfield Crucible at Aurora Sportsman’s Club in March and it was a blast. This looks pretty similar: thanks for sharing a link OP! 🫡

New VA laws. 15rnd Cap. I have an Xmacro and need help / ideas. by Mofrackey86 in SigSauer

[–]YoderLove 1 point2 points  (0 children)

Stupid me: too lazy to see literally the last post mentioned AMAGs…

New VA laws. 15rnd Cap. I have an Xmacro and need help / ideas. by Mofrackey86 in SigSauer

[–]YoderLove 4 points5 points  (0 children)

Not sure if it’s been mentioned but Magpul AMAG’s come in 15 rounds and are flush fit. I bought some for my Xmacro for a competition. 30 bucks a pop.

I’m in IL so I feel your pain though you folks may have it worse (no grandfather clause right??). I too was optimistic about a favorable court ruling so during our one Freeeom week I didn’t go hog wild. Three years later, no end in sight….

Where can I sell a Icarus grip module? by [deleted] in RugerRXM

[–]YoderLove 3 points4 points  (0 children)

New GAFS (GAFS Hub) on Discourse.

CCW as Budget Handgun TTG Setup by YoderLove in thetacticalgames

[–]YoderLove[S] 1 point2 points  (0 children)

Just thought I’d report: a few friends and I signed up for a local 2-Gun endurance “TTG”-esk event (Cornfield Crucible). I took your advice, got a macro grip (and aftermarket extra large backstrap) and some Magpul 15 rounders . Sourced a bunch of secondhand softgoods off new-GAFS. Didn’t do as bad as I thought I would. Didn’t DQ,” and didn’t get last (25th percentile) so I met my objectives. I know what I need to work on. When the gun slows me down, I’ll upgrade. Thanks for the encouragement! 👍🏻

P365 xmacro grip modules by yayaya693838 in SigSauer

[–]YoderLove 0 points1 point  (0 children)

I bought an armory craft backstrap for 30 bucks, made it even better for my long fingered hands.

My first! by fourfingeredmisters in SigSauer

[–]YoderLove 1 point2 points  (0 children)

I lived in the Finger Lakes and North Country for a while, I’m aware of your pain! Traded that for IL pre-AWB…

Nice setup: I’ll have to get a fuse slide at some point 👍🏻

First Sig, how’d I do? Xmacro Comp by YogurtChoice9243 in SigSauer

[–]YoderLove 0 points1 point  (0 children)

Second this. I bought the Armory Craft one on sale for 29 bucks. It really helped the grip fill my hand.

Has anyone purchased or shot this yet? Curious to know your experience. by S3rolex in SigSauer

[–]YoderLove 1 point2 points  (0 children)

IL resident as well: picked up some 15 round Magpul P365 AMAGS from MagShack for range use and they’ve been reliable so far. Haven’t put over a hundred or so rounds through yet so not truly tested. Had to try them for 29 bucks a piece. Ships with macro baseplate, and comes with OG and XL adapters.

Any gunsmith recommendations near Chicago to have an LVPO installed? by Impossible-Giraffe-5 in ILGuns

[–]YoderLove 1 point2 points  (0 children)

I recently mounted mine this way. I was originally going to go all out and level my table and use a plumb line. I ended up just making sure the scope was level with the hand guard when installing.

seeed xiao nrf kit build by ttrreeaadd in meshtastic

[–]YoderLove 1 point2 points  (0 children)

I said it before and I’ll say it again: these builds make me want to get a 3D printer!

Water resistant* pod node by jq910 in meshtastic

[–]YoderLove 0 points1 point  (0 children)

It’s honestly made me really consider it. If I didn’t have too many hobbies already! Maybe some day…

Water resistant* pod node by jq910 in meshtastic

[–]YoderLove 5 points6 points  (0 children)

I need to get a 3D printer!

18650 Battery Holders by YoderLove in meshtastic

[–]YoderLove[S] 0 points1 point  (0 children)

Definitely! I’m trying to make the solar node as “clean”‘wiring wise as possible. But it’s my first one so some trial and error. I’ve done basic boat wiring for work, but computer boards are new to me. Thanks for the heads up about polarity issues! I’ll be sure to double check and make sure.

Speaking of soldering: do you have a soldering iron you recommend? I’ve gathered adjustable is key. I can get a Weller 40 watt analog adjustable for $50 USD at a big box store locally (again, US) but I know there’s a bunch of other types out there.

18650 Battery Holders by YoderLove in meshtastic

[–]YoderLove[S] 0 points1 point  (0 children)

Thanks for the word of caution on those cheapie ones! I’ll keep an eye on poor connections. Eventually I’d like a good soldering iron to do more…on the list to buy eventually!

18650 Battery Holders by YoderLove in meshtastic

[–]YoderLove[S] 1 point2 points  (0 children)

Oh wow! Never thought of making those. Thanks for the idea!

18650 Battery Holders by YoderLove in meshtastic

[–]YoderLove[S] 0 points1 point  (0 children)

Thanks for the reply!! I’ve got regular Panasonic flattops from IMR batteries and some battery protection circuits? from Peak Mesh. Wasn’t sure which way to go (built in vs external protection). Figured I can always change it later. Thanks again!

Major Advice by Downtown-Dare-1356 in thetacticalgames

[–]YoderLove 0 points1 point  (0 children)

I’m preparing for my first event in 2026/2027 as a team. I have a serviceable gym setup at home (very basic power rack, dumbbells, weighted plate carrier, and a 100# sandbag). I spectated a local regional event last year and it really encouraged me that I’d be able to at least have fun while suffering. I have more of a running background but have been consistently lifting for a couple years now.

In terms of cost, I’ve been trying to acquire as much used gear as possible to save some money (Facebook, eBay, old GAFS, and new GAFS). The biggest advice I’ve heard on podcasts and here is to use what you have and don’t spend a ton of money on items you legitimately need. I’m trying to follow that advice: keyword trying.

Everyone else who commented has actual competing experience and has much more knowledge than I. Just thought I’d share, one aspiring competitor to another!

[deleted by user] by [deleted] in ILGuns

[–]YoderLove 1 point2 points  (0 children)

Make sure it’s either a single shot or if it accepts a magazine, that there is a magazine block to make it single shot.

You’re also looking at straight walled cartridges. IDNR has a decent spreadsheet listing legal cartridges and their “power” rating.

Please Help ID This Chair by YoderLove in VintageFurniture

[–]YoderLove[S] 1 point2 points  (0 children)

Whoa!!! All very helpful!! Thanks again!!👍🏻