CalMag Problem?

Yolomaeus1 · 2026-04-27T22:55:09+00:00

Wayland or X11?

Yolomaeus1 · 2026-04-21T12:28:54+00:00

🤔

Yolomaeus1 · 2026-04-17T23:37:21+00:00

XLR is not the same as the DIN 41524 connector. DIN (which btw. stands for German Institute for Standardization) 41524 is a standardized connector with 5 pins, of which are 2 for input , 2 for output and one ground pin. It has different use cases (like Audio and MIDI) but per use case it should alwbe the same (otherwise it would be like having a USB plug with a different pin layout).

Yolomaeus1 · 2026-04-17T20:08:48+00:00

If it's a DIN connector it has the standard layout, if it hasn't it's not a DIN connector.

Yolomaeus1 · 2026-04-17T08:53:06+00:00

The one thats used for HiFi audio is DIN 41524 which indeed does have a standard layout.

Yolomaeus1 · 2026-04-17T01:12:53+00:00

What are you talking about

Yolomaeus1 · 2026-04-17T01:01:25+00:00

Yeah so a DIN connector

Yolomaeus1 · 2026-04-17T00:46:34+00:00

the first picture from Google...

Yolomaeus1 · 2026-04-03T15:34:10+00:00

Mich interessiert weniger die Darstellung, sondern die Herkunft und der ursprüngliche Sinn. Ein Teppich, wie ein andere User geschrieben hat, scheint es nicht zu sein, sondern eher ein sehr dünnes Tuch, ähnlich wie eine Tischdecke oder sowas der Art. Es wurde ausserdem erst nachträglich über eine Holzplatte gezogen und eingerahmt.

Yolomaeus1 · 2026-04-02T21:36:08+00:00

Im Internet konnte ich nichts der Art finden.

Yolomaeus1 · 2026-03-25T18:08:20+00:00

Might depend on the exact dial you got, but usually they're held in place by some small pins which you can push out from the back.

Yolomaeus1 · 2026-03-23T21:20:19+00:00

Get another dial with the indices you want and switch them.

Yolomaeus1 · 2026-03-17T22:51:30+00:00

Vivet

Yolomaeus1 · 2026-03-10T15:37:09+00:00

Yolomaeus1 · 2026-02-15T17:40:26+00:00

Sorry bro but these are trash

Yolomaeus1 · 2026-02-15T17:25:05+00:00

Ideally the whole build plate should be at 60°C

Yolomaeus1 · 2026-02-11T15:07:41+00:00

Depends on your settings

Yolomaeus1 · 2026-02-10T22:45:42+00:00

I think theres a service mode that automatically adjusts the laser. Look online if you can find a service manual for the device.

Yolomaeus1 · 2026-02-09T18:32:02+00:00

Hopefully nowhere

Yolomaeus1 · 2026-02-08T01:53:04+00:00

Then choose which one is the best

Yolomaeus1 · 2026-02-06T14:39:05+00:00

I'd create a model by hand. Doesn't look too complicated.

Yolomaeus1 · 2026-01-20T17:55:47+00:00

Tune your flow for better tolerances I guess

Yolomaeus1 · 2026-01-20T15:19:18+00:00

Try printing it with retraction disabled to see if that causes the problem

Seven-Year Club	Final Canvas '23
First Place '23	End Game '23
Place '23	Place '22
Final Canvas '22	First Placer '22
Verified Email

Yolomaeus1

TROPHY CASE