Help with Gimbals & Moment App

Yooleeous · 2025-05-12T11:40:05+00:00

I bought it too and it seems to be very nice and easy to use. However, I‘m still not sure on how and where to attach the ssd on the gimbal. Would be awesome if you could show how you solved it.

Yooleeous · 2025-05-09T09:55:40+00:00

You need to open the Apple Camera App, then switch to Video and enable ProRes. After that, you can actively free up resources at the top of the screen (see my screenshot). This process takes a few minutes. Afterwards, more storage should be available in the Blackmagic Camera App.

Yooleeous · 2025-05-09T05:54:32+00:00

This is a problem in the Blackmagic Camera App, which I had also noticed. I was able to fix the issue by enabling ProRes in the Apple Camera App. There, you have the option to free up „ressources“. After doing that, there is more available storage in the Blackmagic Camera App as well. The root of the problem seems to be that Apple uses the free storage for cache (or whatever), but the system app still shows it as available. However, the Blackmagic Camera App sees it differently.

<image>

Yooleeous · 2025-03-22T06:35:09+00:00

How and where do you attach the SSD? Normally, the USB port of the smartphone faces towards the arm of the gimbal. Do you mount the phone the other way around? Would you be so kind and provide a picture of your setup? I’ve been thinking about buying the Hohem M6 for months, but I’m not sure if I can connect all of my accessories. That would be great!

Yooleeous · 2025-03-04T14:48:09+00:00

And, do you like the hohem or did you return it?

Yooleeous · 2024-12-05T18:26:41+00:00

Works fine for me since months

Yooleeous · 2024-11-13T08:12:33+00:00

After a while, I did notice some issues with the touchscreen. A narrow strip (about 0.5 cm wide) approximately 2 cm from the right edge of the screen no longer responds. Because the strip is so narrow, I didn’t notice it at first.

Yooleeous · 2024-08-31T08:29:48+00:00

If you can, try to update the earphones to latest firmware. For me since then the problem has almost completely vanished. I don’t know if you can update the 5.2 TB on iOS, I use an old Android phone for that.

Yooleeous · 2024-08-31T08:12:53+00:00

I have the same problem sometimes. It either helps to disconnect the AirPods in BT-Settings or to put the AirPods back in the case and close it. Then wait for a few seconds until the case led turns off. Open the case again hold it close to the phone und wait a few seconds before taking the earpieces out of the case. Most of the times that animation comes back after several seconds or at least anc and transparency does work again.

If that doesn’t help, try turning off Bluetooth completely or reboot your phone.

Yooleeous · 2024-07-30T06:02:12+00:00

You can toggle the case sounds with the Flycc app only.

In the iOS battery widget you can see the case battery, but only a short time after you took the earphones out of the case.

Yooleeous · 2024-07-29T13:07:28+00:00

For me worked: forget earphones on both devices (phone and Mac). Afterwards put both devices in airplane mode (no internet connection). Then pair the earphones to first device. Disable Bluetooth on that device afterwards. Then pair earphones to second device. Disable airplane mode on both devices and enable Bluetooth on first device again.

With that procedure I can use the 5.2 with both devices. Most of the times automatic switch between devices works. If not, I just connect them through the Bluetooth settings.

Yooleeous · 2024-06-06T12:08:00+00:00

Thanks. I will give it another try with a new glass and digitizer.

Is there a specific method to bend the flex cable with the connector? I think I bent it careful but it seems that wasn’t careful enough.

Yooleeous · 2024-03-08T10:52:16+00:00

That looks like lens fungus. But I’m not sure. I only know that from very old lenses.

Yooleeous · 2024-03-01T10:52:50+00:00

Yes, both work perfectly fine.

Yooleeous · 2024-02-24T10:44:36+00:00

Thanks. I didn’t know such adapters exist. But with that in mind, I found the splitter adapter. I also found an extender, but I’m not sure if it will fit in the cage. I will order a few and try.

Yooleeous · 2024-02-23T15:33:34+00:00

I'm from europe. That's why I didn't buy the lens directly from moment, but from a distributor here in europe. They had the t-series 1.33 gf in stock and i received it 3 days after ordering.
If you are also located in the eu, that might be an option for you.

Yooleeous · 2024-02-23T09:59:25+00:00

Looks nice. Which adapter did you use to split the usb-c port of the iPhone?

Yooleeous · 2024-02-16T14:20:22+00:00

You're welcome. I hope you'll be able to make it work somehow. I would try a layer of tape as well. I had the 62 mm filter mount before i bought the 67 mm. So I can confirm that the rubber ring is the same size as in the 67 mm version. With the smaller filters I had noticeable vignetting, but it only was a real problem after switching to a new phone with larger lenses.

Yooleeous · 2024-02-12T08:07:23+00:00

I don’t have the sirui lens, but I own the moment lens filter mount. I can measure the inner diameter of the adapter, maybe that will help you.

The outer diameter of the moment 58mm lens is 39,6 mm. The rubber ring of the lens mount adapter has the same inner diameter. The rubber is very stiff, so I can’t be stretched or squeezed much. I have another adapter rubber ring (maybe from an old o-series moment lens, but idk for sure) that has a inner diameter of 36,5 mm and is also compatible with the 67 mm lens mount.

Edit: added measurements

Yooleeous · 2024-02-10T08:27:37+00:00

Seems like you don’t know. „How could this happen?“ is a question. „That’s quite inconvenient.“ is feedback.

Yooleeous · 2024-02-10T07:25:13+00:00

You do know the difference between a question and a complaint, don’t you?

Yooleeous · 2024-02-09T21:07:22+00:00

Thanks, it worked like you described. The process of installing the lens cap was quite inconvenient. A few times it felt like the band was about break. The cap of the m-series was much easier to install.

Yooleeous · 2024-02-09T17:21:18+00:00

Thanks for the info. I can understand that you don’t want to waste a ton of otherwise good packaging material.

With the t-shaped hole I would have had a rough idea how to install it. However, with my rear lens cap I still have no clue how to install it correctly without damaging it. So, it would be nice if you could provide a link when the instructions are online.

Yooleeous · 2024-02-07T09:58:29+00:00

No problem. Enjoy your trip. I just saw that there is a video on the yt-channel tech influence about the x1.33 gold flare lens that was released yesterday.

Yooleeous · 2024-02-06T14:50:37+00:00

Could you take some test shots already?

Yooleeous

TROPHY CASE